Hawking HS2G24T BROCHURE

CA R E FR EE NETW ORK ING

2-Port 1000Mbps + 24-Port 10/100Mbps

Auto-Sensing Switch

CONNECT W HEREVER YOU W ANT• W HENEV ER Y OU W A NT

HS2G24T

High Speed Wired Data Transmissions
Supports 8K MAC Addresses
19" 1U Rack Mount
Easy to Install and Use

PACKAGE CONTENTS:

 One 2-Port 1000Mbps + 24-Port 10/100Mbps

Switch

 One Power Adapter

 One Easy-to-Follow User's Manual

Optimizing your budget while increase data
transfer performance with a "+ 2 Gigabit Port"!

Fast and Easy Networking

The Hawking HS2G24T Gigabit + Fast Ethernet Switch, 24 ports 10/100Mbps Rack Mount
with an additional 2 Ports 10/100/1000Mbps, is designed for easy installation and high performance.
The HS2G24T enables the segmentation of large networks into smaller, connected subnets, thus allowing you to
experience improved performance for demanding applications. Port 1 to 24 delivers up to 200Mbps throughput, and is
able to operate in either half or full-duplex modes. Port 25 to 26 delivers up to 2000Mbps throughput in full duplex mode.

The HS2G24T features an N-way auto-negotiation (or auto-sense) function (refer to the chapter titled, "N-way Process"),
which automatically adjusts the device for optimum operation. "Store-and-Forward" architecture filters eliminate error
packets and improve efficiency. The switch also utilizes auto-MDI/MDIX technology, which enables you to use either
standard Ethernet cables or crossover Ethernet cables to connect with other devices. Better yet, the Plug and Play
HFS24T is powerful and reliable, and can run your high-end video, graphic, multimedia, database, and mission-critical
applications with ease. Better yet, the Plug and Play HS2G24T is powerful and reliable, and can run your high-end video,
graphic, multimedia, database, and mission-critical applications with ease.

The HS2G24T is ideal use with multiple, high-speed servers to share bandwidth within 10Mbps or 100Mbps workgroups
to share bandwidth within 10Mbps, 100Mbps, or even 1000Mbps Ethernet environments.

Features:

 Two 1000BASE-T Gigabit Ethernet port
 Twenty-four 100BASE-TX Fast Ethernet ports
 Supports Auto-MDIX for each port
 Support Full/Half duplex transfer mode for 10/100Mbps Fast Ethernet ports
 Support Full duplex transfer mode for 1000Mbps Gigabit Ethernet ports
 Full wire speed reception and transmission
 Store-and-Forward switching method
 Integrated address Look-Up Engine, supports 8K MAC addresses
 Supports 2.5Mbit RAM for data buffering
 Extensive front-panel diagnostic LEDs
 IEEE 802.3x flow control for full-duplex
 Back pressure flow control for half-duplex

 Standard 19" Rack Mount size

System Requirements:

 IEEE 802.3 10Base-T, 100Base-TX, or 1000Base-T Ethernet

CAREFREE NETWORKING

HS2G24T

High Speed Wired Data Transmissions

Easy Installation & Setup

Two Year Warranty

2-Port 1000Mbps + 24-Port 10/100Mbps

Auto-Sensing Switch

CONNECT WHEREVER YOU WANT• WHENEVER YOU WANT

HAWKING TECHNOLOGIES, INC.

USA: Irvine, California Europe: Rotterdam, The Netherlands

Website: www.hawkingtech.com Website: www.hawkingeurope.com

Email: sales

Tel: [phone] Tel: [phone]

RELATED PRODUCTS:

HFS5T 5-Port 10/100M Fast Ethernet Switch

HFS8T 8-Port 10/100M Fast Ethernet Switch

HFS16T 16-Port 10/100M Rack Mount Switch

HGS5T 5-Port Gigabit Network Switch

HGS8T 8-Port Gigabit Network Switch

HS1G8T 1-Port 1000Mbps + 8-Port 10/100Mbps Auto-Sensing Switch

@hawkingtech.com Email: [e-mail]

SPECIFICATIONS

Network Specifications

· IEEE 802.3 10BASE-T

· IEEE 802.3u 100BASE-TX,

· IEEE 802.3ab 1000BASE-T

· IEEE 802.3x Full Duplex Flow Control

Max Bandwidth

· Ethernet: 10Mbps (Half-duplex)

20Mbps (Full-duplex)

· Fast Ethernet: 100Mbps (Half-duplex)

200Mbps (Full-duplex)

· Gigabit Ethernet: 2000Mbps (Full-duplex)

Media Interface

· (24) 10/100Mbps RJ-45 ports

· (2) 1000Mbps RJ-45 port

Data RAM Buffers

· 2.5Mbit per device

MAC Address Table

·Upto8Kentriesperdevice

Network Cables

· Gigabit Ethernet - 4-Pair UTP CAT 5

· Fast Ethernet - 2-Pair UTP CAT 5

· Ethernet - 2-Pair UTP CAT 3, 4, 5

Operating Temperature

· 0° - 40° C

Relative Humidity

· 5 % - 90% non-condensing

Power

· 100 - 240VAC 50/60Hz, Internal Universal switching

Power

· Power Consumption: 11.75 watts. (max.)

Diagnostics LEDs

· Per unit: Power

· Port 1 -24: Link/Activity, 100 Mbps

· Port 25 -26: Link/Activity, 1000Mbps, 100Mbps

Dimensions (W x D x H)

·440x140x44mm

Certifications

· FCC Part 15 Class A

·CEmarkClassA

· V CCI-A

READY, NETWORK & GO!

Step 1 - Power On the Switch

Power on the switch by connecting the power cord.

Step 2 - Connect Computers, Servers, etc.

Connect computers, servers, or other appropriate devices

to the ports on the switch. Note: Port#1-24 are the 10/100Mbps and Port#25-

26 are the 1000Mbps.

Step 3 - Get Started

Power on the attached computers, servers, etc. and you're

ready to go!

PRODUCT DIAGRAMS:

LED Panel Display

Power LED:

The indicator is lit when the power is on.

Link/Activity LED:

Blinks during power-on diagnostics

1000Mbps LED:

LED is lit when there is a connection to a 1000Mbps Gigabit Ethernet device on the Gigabit
port.

100Mbps LEDs:

These LEDs are lit when there is a connection (or link) to a 100Mbps Fast Ethernet device at the
desired port.

Copyright © Hawking Technologies, Inc. 2004. All rights reserved. All trademarks herein are the
property of their respective owners. Product specification subjects to change without notice.