Page 1
High Power Outdoor WiFi
Directional Access Point / Bridge
HIGH POWER POINT-TO-POINT OUTDOOR
WIFI COVERAGE SOLUTION!
PACKAGE CONTENTS:
One High Power Outdoor WiFi Directional Access Point / Bridge
One Power over Ethernet Adapter (PoE) w/AC Power Adapter
One RJ-45 Ethernet Cable
One Wall/Pole Mounting Kit
One Setup CD
One Quick Installation Guide (QIG)
High Power Outdoor WiFi Directional Access Point / Bridge
Hawking Technology's HPOW10D puts multiple solutions into one weather proof outdoor
unit. The High Power Outdoor WiFi Directional Access Point / Bridge functions as an Outdoor
Access Point, Universal Repeater or Ethernet Bridge. Additionally, the internal 10dBi MiMO
Directional antenna provides focused directional coverage, perfect for point to point solutions.
It features a Power over Ethernet connection and includes wall and pole mounting kits for
easy installation and setup.
MODEL:
HPOW10D
Outdoor Wireless-N Access Point Mode:
Create a wireless network in an outdoor or indoor location by setting the HPOW10D in Access Point mode. In Access Point mode
the HPOW10D enables wireless access to any existing wired networking.
Outdoor Wireless-N Bridge Mode:
Enable any wired Ethernet-ready device or existing wired network to connect to your existing wireless network using the
HPOW10D. Wirelessly connect the network of your remote office building to your main office building easily by setting the
HPOW10D in Bridge Mode.
Outdoor Wireless-N Universal Repeater Mode:
Repeat the wireless signal from your existing network and extend the total wireless range of your network to an outdoor location.
Setting up the HPOW10D in Universal Repeater mode allows you to extend the range from an indoor or outdoor Wi-Fi network to
your desired new location.
Features
800mW of High Power WiFi networking for Outdoors
Features multiple operating modes and Power over Ethernet
Setup Utility allows for easy configuration of multiple outdoor access points
Built-In 10dBi MiMO Directional Antennas
Heavy duty, weatherproof design
Dual Radio Wireless Repeater
Page 2
PRIMARY OPERATING MODES
High Power Outdor WiFi
Directional Access Point / Bridge
MODEL:
HPOW10D
• Capable of Multiple Operating Modes including Access Point,
Ethernet Bridge and Universal Repeater
• Utilizes Power over Ethernet for (PoE) outdoor installations!
• Weatherproof design allows for installations in any outdoor environment
•
Wall mounting and pole mounting kit included
• Power over Ethernet Injector included for initial configuration
Wireless Access Point Mode
Universal Repeater Mode
Add outdoor wireless access
to any existing wired network
High Power Outdoor WiFi
Directional Access Point / Bridge
Extend the range of any
Wireless b/g/n network
Directional Access Point / Bridge
HPOW10D
High Power Outdoor WiFi
HPOW10D
Wireless Laptop
Computer
Wireless Desktop
Computer
Wireless Workgroup
(Bridge)
Wireless Laptop
Computer
Wireless Desktop
Computer
Network Bridging Mode
Access Point
or Router
Focused Networking Coverage
Wirelessly connect one network
or device to another wireless
network
High Power Outdoor WiFi
Directional Access Point / Bridge
High Power Outdoor WiFi
Directional Access Point / Bridge
HPOW10D
HPOW10D
Any Ethernet
Ready Device
or
or
or
EASY INSTALLATION WITH POWER OVER ETHERNET
Network
Data/Power
Power over Ethernet (PoE) Adapter Included
PoE
Power
By combining your power and data connections into a single cable, PoE simplifies the setup
of the High Power Outdoor WiFi Directional Access Point/Bridge. The included Power over
Ethernet DC Injector provides power and network access (through your home or business
router or network connection) and combines them into a single RJ-45 connection for the
HPOW10D. This allows you to install the HPOW10D outdoors in hard to reach locations
without worrying about running both power and Ethernet cables.
Page 3
High Power Outdoor WiFi
Directional Access Point / Bridge
SPECIFICATIONS:
Modem Specifications:
Operating Modes:
Wireless-300N Access Point
Wireless-300N Ethernet Bridge
Wireless-300N Universal Repeater
Wireless-300N Point to Point Access Point
Wireless-300N Point to Multipoint Access Point
Wireless-300N WDS Repeater
Network Specifications:
IEEE 802.11b/g/n
10dBi Built-In MiMO Directional Antenna
800mW Max 2.4GHz Wireless Transmission
Power
Supports WEP, WPA, WPA2 Wi-Fi Security
Network Management
Setup Utility (Browser Based)
Web Based Management Interface
Hardware Specifications:
Ports
Two 10/100 Mbps Ethernet Ports (PoE Pass
Through)
Power
Power Over Ethernet Adapter (POE)
Dimension / Weight
HPOW10D 6.5 (H) X 3.75 (L) X 2 (W) inches /
0.77lbs
Temperature
Operating: -4~140˚F , Storage: -40~176˚F
Humidity
Operating: 100% (Non-Condensing)
Storage: 100% (Non-Condensing)
System Requirements
Windows XP + or Mac OS X +
Internet web browser (Internet Explorer 4.0
or better, Safari, Mozilla, etc.)
Ethernet Cable to connect device to PoE
(length will vary depending on installation
environment)
A home or business network
MODEL:
HPOW10D
HAWKING TECHNOLOGIES, INC. IRVINE, CA 92618
SALES: (888) 662-8828 FAX : (949) 206-9072
E-MAIL: sales@hawkingtech.com TECHNICAL SUPPORT: techsupport@hawkingtech.com
POWER ON & CONNECT!
It’s easy to install, it’s easy to use! Everyone can do it.
STEP 1: Power on the Access Point
Use the included Power over
Ethernet Injector to connect
the HPOW10D to your
network and a power source.
Data/Power
Power over Ethernet (PoE) Adapter Included
PoE
Network
Power
STEP 2: Configure the Access Point
Configuration can be
completed from any device
with a web browser. Simply
log into the setup page and
select your settings.
STEP 3: Mount the Access Point
Find a safe location to mount
the High Power Outdoor WiFi
Directional Access
Point/Bridge. For the best
point to point coverage, use
two HPOW10Ds facing each
other.
MOUNTING OPTIONS
The HPOW10D is complete with both Pole and Mounting Hardware.
For Wall Mounting, locate the included
bracket inside the packaging. Use the
included hardware to mount the bracket to
the wall. Once your bracket is secure, Click
the HPOW10D into place via the rear pole
mount extension.
For Pole Mounting, use the
included hardware and thread the
mounting tie straps through the
rear HPOW10D extension and
around your pole. Thread the end
through the lock head and secure
at your preferred height.
Loading...