Page 1
Hi-Gain™Outdoor
-300
Dual Radio Smart Repeater
MODEL:
PACKAGE CONTENTS:
One Hi-Gain™ Outdoor Wireless-N Dual Radio Smart Repeater
Two 5dBi Hi-Gain Outdoor Omni-Directional Antennas
One Power over Ethernet DC Injector
L-shape Antennas Connector
One Waterproof Gasket Kit for RJ-45
Power Cable and Power Transformer
Ethernet Cable
Wall & Pole Mounting Kit
Setup CD-Rom
HOW2R1
Unleash your Wireless Network with the Hawking Hi-Gain™Outdoor 2.4GHz Wireless-300N Dual
Radio Smart Repeater, HOW2R1. The HOW2R1 outdoor smart repeater connects and repeats your
existing wireless network with up to 64X the power output and 8X the distance of a standard Wireless-G
device. Similar to the Hawking’s HW2R1 Smart Repeater with dual radio design, the HOW2R1 Outdoor
Smart Repeater is engineered with two powerful Wi-Fi radios, one radio is dedicated to receiving signals
from a wireless source, access point or router, and the other radio is used to rebroadcasting wireless
signals throughout your surroundings. To further enhance its wireless range and coverage, the WiFi
receiving radio is connected to an 11dBi directional antenna, integrated internally in the HOW2R1. In
addition, two external 5dBi antennas are connected to the rebroadcasting WiFi radio to effectively
elimnates wireless deadspots inside and outside of your home or office.
This powerful repeater is not only robustly design to withstand outdoor environment, it also packed with wireless security features,
such as MAC access control, IEEE 802.11x authentication, WPA, WPA2, hidden ESSID, and the basic WEP encryption. With data
transfer rate of up to 300Mbps, the HOW2R1 is an ideal solution for High Performance Wireless Solution, extending your wireless
signals for your home or your business, or providing wireless access to RV parks or Marine docks. The possibilities are endless.
Features
Connects and repeats any 2.4GHz 802.11b/g/n Wireless Network
• Eliminate Wireless Dead Spots inside and outside your Home or Office with high power output of up to 200mW
Increase your wireless distance of up to 8X and power output of up to 64X compared to a standard wireless 802.11g network*
Engineered with two WiFi radios - one receiving radio and one rebroadcasting radio
Built-in 11dBi Directional Antenna is dedicated to receiving wireless signals
Two 5dBi external Omni-Directional Antennas are dedicated to rebroadcasting wireless signals
• Easy Setup: Install and Configure in less than 1 Minute
• Heavy duty, waterproof design
System Requirements:
• One computer (Mac or PC) with an available CD or DVD-Rom drive
• Internet Web Browser (Internet Explorer, Safari, etc.)
• A Wired or Wireless networking adapter (i.e. Airport card, built-in Ethernet adapter, etc.)
• A Wireless Internet connection (such as a HotSpot, etc.)
Dual Radio Wireless Repeater
* Actual distance and data output power may vary depending on your networking environment.
Page 2
Hi-Gain™ Outdoor
s
otSot
S
ot
e
s
Dual Radio Smart Repeater
Internal 11dBi Directional Antenna - Receive Wi-Fi Signal
Two Built-in Wi-Fi Radios: Receiving and Rebroadcasting signals
RECEIVE WIRELESS SIGNALS
MODEL:
OUTDOOR WALL OR POLE
MOUNTING KIT
INCLUDED
HOW2R1
SOLUTIONS
HOME USE
Hi-Gain™ Wireless-N
Dual Radio Smart Repeater
HOW2R1
FOR THE OFFICE
Hi-Gain™ Wireless-N
Dual Radio Smart Repeater
HOW2R1
Extend a wireless signal to your backyard
Two External 5dBi Omni-Directional - Rebroadcast Wi-Fi Signal
Connect the network and internet connection from one
o
ce to another
Hi-Gain™ 14dBi Outdoor
Directional Antenna Kit
HAO14SDP
REBROADCAST WIRELESS SIGNALS
SUPPORT UTILITY
The included Windows based Smart Repeater Support Utility is
a powerful tool for administrators to configure and
troubleshoot wireless connections for multiple Smart
Repeaters. The Support Utility allows administrators to upgrade
firmware, reset devices to factory settings, adjust IP settings,
scan and connect to wireless Internet networks and view
current system settings. The Utility uses a proprietary
communication protocol to connect to the Smart Repeater
without having to know the correct IP settings.
FOR MARINERS
Connect to an on shore wireless Internet connection to
provide wireless Internet access to your boat or yacht
FOR OUTDOOR APPLICATIONS
RV Host
HotSpot
Hi-Gain™ Wireless-N
Hi-Gain™ Wireless-N
Dual Radio Smart Repeater
Dual Radio Smart Repeater
HOW2R1
HOW2R1
Hi-Gain™ Wireless-N
Dual Radio Smart Repeater
Extend the range of a camp ground’s
wireless Internet
RV Host
Repeater
HOW2R1
HARDWARE SETUP
Data/Power
Power over Ethernet (PoE)
Injector (Included)
By combining your power and data connections into a single cable, PoE simplifies
the setup of the Hi-Gain™ Outdoor Wireless-N Dual Radio Smart Repeater. The
included Power over Ethernet DC Injector provides power and network access
(through your home or business router or network connection), and combines
them into a single RJ-45 connection for the HOW2R1. This allows you to install the
HOW2R1 outdoor in hard to reach locations without worrying about running
both power and Ethernet cables.
Power
Page 3
Hi-Gain™ Outdoor Wir
eless-N
E
L
Dual Radio Smart Repeater
HAWKING TECHNOLOGIES, INC.
35 HAMMOND, SUITE 150 x IRVINE, CA 92618
SALES: (888) 662-8828 FAX : (949) 206-9072
E-MAIL: sales@hawkingtech.com TECHNICAL SUPPORT: techsupport@hawkingtech.com
SPECIFICATIONS:
Bridge Specifications (Receiving):
802.11n 150M Wireless WAN
x Dedicated RJ-SMA Antenna Port
x Real Time LED Signal Strength Display
x Supports WPA, WPA2, WEP Wi-Fi Security
Network Bridging Mode:
x Pass through Settings from a wireless Internet connection
Antenna: Internal 11dBi Directional
Ouput Power
x 11n: 18 ± 1.5dBm, 11g: 21 ± 1.5dBm, 11b: 23 ± 1.5dBm
POWER ON & CONNECT!
It’s easy to install, it’s easy to use! Everyone can do it.
STEP 1: Power on the Repeater
Connnect the included Ethernet cable
to the Repeater, and Power over
Ethernet Injector. Finally, connect the
power adapter to an available wall
socket.
STEP 2: Configure the Repeater
Insert the included CD and open the
Support Utility. Configure the
Repeater, and you’re ready to go!
Data/Power
Power over Ethernet (PoE)
Injector (Included)
MODEL:
HOW2R1
Power
Local Network Specifications (Rebroadcasting):
RJ-45 Ethernet 10/100M Port
802.11n 300Mbps Wireless LAN
x Two dedicated RJ-SMA Antenna Ports
x Supports WPA, WPA2, WPS (Wi-Fi Protected Setup), WEP Wi-Fi
Security
Broadband Router Features
x DHCP Server, Firewall, Demilitarized Zone (DMZ), Port
Forwarding, Quality of Service, Virtual Servers / Port Forwarding,
Network Address Translation, Access Control-Mac & IP Address
Filtering, URL Blocking, Denial of Service (DoS), Remote
Management
Antenna: Two external 5dBi Omni-Directional
Ouput Power
x 11n: 14 ± 1.5dBm, 11g: 15 ± 1.5dBm, 11b: 17 ± 1.5dBm
Hardware Specifications:
Connectors/Ports/Switches
x Two N-Type Connectors
x One 10/100M Ethernet Ports (LAN)
Power:
x 48V, 0.5 Switching Power Adapter (POE)
Dimension / Weight
x POE Injector: 3 x 2¼ x ¾ in / app. 0.10 lb.
x Repeater: 7 x 5½ x 3 in / app. 1.10 lb (excludes antennas)
Temperature
x Operating: -20~70˚C , Storage: -40~80˚C
Humidity
x Operating: 10~90% (Non-Condensing)
x Storage: 5~95% (Non-Condensing)
STEP 3: Mount the Repeater
Find a safe location to mount the
Hi-Gain Outdoor Wireless-N Smart
Repeater.
NETWORK DIAGRAM
WIRELESS INTERNET CONNECTION
WIREL
CA
LOCAL WIRELESS NETWORK
RECEIVES WIRELESS SIGNALS
Hi-Gain™ Antenna provide
more connection range.
REBROADCASTS WIRELESS SIGNALS
External Location
Wireless Internet Connection
(wireless hot spot)
Local Area
Specifications are subject to change without prior notice. * Actual distance and data output power may vary depending on your networking environment.
©2010 Hawking Technologies, Inc. All righs reserved.
Loading...