Hawking FX200ES User Manual

FX200ES

Get Connected With Hawking

• One 100Base-FX Fiber Optical Port

• One 10Base-T/100Base-TX auto-sense

port.

• 62.5/125 multimode fiber optical connect
up to 2000 meter (6560 ft.)

• Store-and-forward architecture with wire­speed filtering and forwarding rates.

• 8K Mac Address entry

• Easy to use, Easy to install

• Free Tech Support

Extended Your Network Distance and
Security

The Hawking FX200ES Fiber Switch is a low cost
solution for connecting a fiber optical to regular
10Base-T Ethernet or 100Base-TX Fast Ethernet
network to extend the network distance to 2000
meters (6560 ft.). It is great for intra-building
connection or the distance beyond 100 meters
(328ft). It transmits up to 200Mbps speed.

Switching Technology

Switching is a cost-effective way of increasing the
total network capacity available to users on a local
area network. A switch increases capacity and
decreases network loading by dividing a local area
network into different segments, which don’t compete
with each other for network transmission capacity.
The switch acts as a high-speed selective bridge
between the individual segments. The switch,
without interfering with any other segments,
automatically forwards traffic that needs to go from
one segment to another. By doing this the total
network capacity is multiplied, while still maintaining
the same network cabling and adapter cards.
For Fast Ethernet networks, a switch is an effective
way of eliminating problems of chaining hubs beyond
the “two-repeater limit.” A switch can be used t o split
parts of t he network into different collision domains,
making it possible to expand your Fast Ethernet
network beyond the 205-meter network diameter
limit for 100BASE-TX networks. Switches supporting
both traditional 10Mbps Ethernet and 100Mbps Fast
Ethernet are also ideal for bridg ing between existing
10Mbps networks and new 100Mbps networks.

Package Contents:

•

One Two Port 10/100TX/100FX Fiber Switch

•

One Power Cord

•

Easy to follow owner's manual

Systems Requirement:

•

IEEE 802.3 10BaseT Ethernet or IEEE 802.u
100BaseTX Fast Ethernet

•

IEEE 802.3u 100BaseFX Fast Ethernet

Network Operations Systems
Support:

Microsoft Windows 95/98/2000//NT/ME
and more!

Ready, Network & Go!

It's easy to set up, it's easy to use, and
everyone can use it. It only takes one
step!

Step 1 – Connect it

Connect the FX200ES RJ45 port to your
10/100M Ethernet network using standard
RJ45 cabling and connect Fiber SC port
to your 100M Fiber network use 125/62.5u
Fiber Optical Multimode Patch cable. And
you are networked! It's that easy!

Hawking Technologies, INC.

6A Faraday, Irvine, California, USA
Sales: [phone], [phone]

Fax: [phone]
Email: [e-mail]
Tech Support: [phone]
Email: [e-mail]
URL: www.hawkingtech.com

Features Benefits

Plug-n-Play Ethernet
& Fast Ethernet
Switch

10/100 Auto­Sensing/Force Full
Duplex

2 Switch Ports (1
RJ-45 and 1 SC
connectors)

IEEE 802.3, 802.3u
Compliant

Easy migration from
10Mbps to 100Mbps

Connect 10Mbps,
100Mbps, Half and Full
Duplex simultaneously

Provide full wire-rate
10/100Mbps Switch Ports
for greater network
performance

Guaranteed Switch
performance and hardware
compatibility with other
Switches, Hubs and
Adapters

Additional Features

• Supports " Store and Forward" switching
architecture 8K MAC address entries per
port

• Two-way (incoming and outgoing) address
learning supported for each port
170 full-size data packet buffer for
100Mbps port Routing decision less than

0.5 u sec.

• Filtering and forwarding rate - 14880
packets per second for 10Mbps ports,
148800 per second for 100Mbps ports.

• Power supply automatically adjusts to the
voltage range of the AC power being
supplied (100VAC/60Hz, 240VAC/50Hz),
with no change in settings or fuse

Copyright  Hawking Technologies, Inc. 2001. All rights
reserved .All trademark s herein are the property of their
respective owners. Product s pecification subject s to change
without notice.

required.

Specification:

Standards:

• IEEE 802.3u 100Base-TX Fast Ethernet

• IEEE 802.3 10Base-T Ethernet

• IEEE 802.3u 100Base-FX Fast Ethernet

Network Media:

• Cat 5 UTP

• 125/62.5u Multimode Fiber Optical

Maximum Lengths:

• 100 meter (328ft) maximum UTP cable
length from switch to station/switch

• 2000 meter (6560ft) maximum Fiber
Optical Multimode cable length for switch­to-station/switch connection

Connectors:

• 1 RJ-45 10/100 Mbps auto-sensing ports

• 1 SC Fiber Port

LED Indicators:

• System - Power

• Per Port – Link, Traffic, Collision, 10/100

Mbps and Half/Full duplex LEDs

Dimensions:

• 260mm x 44mm x 145mm

Temperature:

• Operating: 0°C to 40°C

Humidity:

• Operating: 10% to 90%

Emission:

• FCC Part 15 Class A and CISPR Class A,
VCCI-I CE Mark

Order Information:

FX200ES Two Port 10/100TX-100FX Switch
FX826ES 2 RJ-45 10Base-T/100Base-TX Ports, 6

100Base-FX Ports