1
Hawkeye FIREFLY
Micro Action CAM
Only 14g
1080/720P 30FPS
Ver 2.0
2
Contents
Safety Guidelines：......................................................................................................... 3
Features ：.......................................................................................................................4
Performance and Specifications:................................................................................... 5
Buttons:.............................................................................................................................. 5
Record videos:.................................................................................................................. 5
Battery Charging:..............................................................................................................5
Transferring Files:.............................................................................................................5
Update Firmware:............................................................................................................. 6
NOTE:................................................................................................................................ 8
3
Safety Guidelines：
Please read the instruction manual carefully before using the camera for the first time.
1.It’s a high-precision product, do not drop or crash it.
2.Do not expose the camera to strong magnetic objects, sch as magnets or electrical
motors. Avoid exposing the product to strong radio waves. Strong magnetic fields may
cause the products breakdown or image/audio damage.
3.Never leave the products exposed to high temperatures and direct sunlight.
4.In case of overheating, smoke,or unpleasan smell in the process of charging,
unplug your device immediately to prevent fire hazard.
5.While charging , keep the product out of children’s reach. Power cable may casuse
children accidental suffocation or electric shock.
6.Use orignal Firfly 8S’s batteries, to make sure the camera work/charge properly.
7.Keep the device in cool, dry and dust-free places.
8.Please do not throw the product or it’s battery to the garbage, find a speific recycling
poit for it.
4
Features ：
1.Reset button
2. Mini USB
3.Micro SD card port
5.Mode button
。
6.Power/OK button
4. LED lights：
Red：ON,charging ; OFF, full.
Blue：ON,720P ; OFF 1080P.
Green：State LED, It will flash
while recording.
1 2 3 4 5 6
5
Performance and Specifications:
Resolutions
1080P 30FPS/
720P 30FPS
AV
NTSC
Micro SD card
Class 4
SD card supported
8-32G
Size
24×24×32 MM
Weight
14g
Battery
200mAH
Working time
About 50 minutes
Charging time
About 2 Hours
File format
*.AVI
Lens
F/2.8，5 glasses
Angle
Diagonal 160 degrees
Voltage
5V
Current
200mA
Buttons:
Name
Functions
Description
Power/
OK Button
Power ON/OFF;
Start/Stop Recording
Press Once to power on, press and hold
for 3 seconds to power off;
Press once to start/stop recording after
power on.
Mode Button
Toggle between
1080P/720P mode
Reset Button
Reset the camera
Reset the machine to default settings.
Record videos:
Press Power/OK button once to start/stop recording after power on.
The videos are 15 minutes per clip and loop recording.
Note: The camera will turn off automatically when there’s no sd card.
Battery Charging:
Connect the camera to a computer or phone charger using the included USB
cable. Use 1A charger, and turn off the camera when charging will increase the
charging rate(Press and hold Power/OK button for 3 seconds could shutdown
the camera). The Charging Status Light it will turn OFF when the battery is fully
charged.
Transferring Files:
1. Connect the camera to a computer via the included USB cable or card reader, and
6
then turn on the camera.
2. Double click “My Computer” and locate “Removable Disk”. Enter “Removable Disk”
and you will find all photo and video files in DV folder.
Update Firmware:
1.Delete all the files and folders in the SD card(suggest:8G/16G).
2.Download the firmware to SD card .
3.Put the SD card into the camera(make sure battery > 50%).
4.Power on the camera and it will update firmware automatically.
5.When updating, the LED will flash.
6.When the update process is finished, the LED will stop flashing.
7.Take the SD card out and delete the update file（use a card reader）.
8.Power off the camera and reboot again.
9.Please check on www.CNfpv.com for new firmware updates.
FCC STATEMENT：
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
7
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
8
NOTE:
For more information please check our Youtube/Facebook channel:
Hawkeye Firefly action camera
Loading...