Hawk BVP25D User Manual

Side Mount

3-Speed Switch and

Dual GFCI Power Outlets

900 CFM Air Mover

Dry Floors, Circulate and Exhaust Air

Hawk BVP25D User’s Manual Hawk BVP25D User’s Manual

Daisy Chain up to

5 Units for Extra Air

Moving Power

HAWK HAWK

ENTERPRISES ENTERPRISES

Works in Tight Spaces for

Tough Drying Jobs

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

Subject to Change Without Noce

Specificaons

Model BVP25D
Motor 1/4 HP, 115V, 60Hz with 10 . 14 AWG Cord Aached
Air Volume 900 CFM (High), 700 CFM (Med), 690 CFM (Low Speed)
Amp Draw 2.1 Amp (High), 1.8 Amp (Med), 1.7 Amp (Low Speed)
Air Flow Direcons 0, 45 and 90 degrees
Max Stac Pressure 1.3ʺ
Chassis Construcon Sturdy Rotomolded Plasc
Stackable in Storage 5 units
Daisy Chain Yes - Up to 5 Units
Weight 11.3 lbs. (net) / 12.6 lbs. (gross)
Size (LxWxH) 12.8” x 12.4” x 13.3”
Sound Level 67 dB
Cerficaon C-ETL-US

Air Flow in 3 Angles

0, 45 & 90 Degrees

12.8”

12.4”

13.3”

Hawk Limited Warranty

Hawk Enterprises Inc. equipment has been manufactured, tested and inspected with carefully
engineered requirements. Hawk warrants each new machine, part and accessory to be free of
defects in materials and workmanship for a me specified in the table below. Repair or replacement
of defecve parts or service must be conducted by a Hawk authorized service provider.

Warranty Start Date: Warranty coverage starts on the date the machine is installed at the end user's
site, or six months from the ship date from the factory, whichever comes first. The distributor who
sold you the machine is responsible for compleng the registraon form at
www. hawkenterprises.com/service_registraon. This forms idenfies the machine and records
warranty state date.

Warranty Coverage - Hawk Air Movers
Motor and Gearbox - 1 year
Non-Wear Items - 6 months
Repair Parts - 90 days
Service Labor - 6 months

Excepons and Exclusions from the Limited Warranty

This warranty does not cover repairs resulng from accident, abuse, misuse, damage in transit, or
lack of proper maintenance. Equipment must be used with electric current noted on the data plate.

Damages from operaon at other voltages or currents will void the warranty.

Certain normal wear parts are consumed in use of this machine, and are not covered by this
warranty. These parts include, but are not limited too, cords, switches, bumpers, bearings, isolators,
carbon motor brushes, compensators, brushes, pad drivers, bulbs, bags, v-belts and filters. No other
warranes extend beyond the terms of this Hawk Limited Warranty, including implied warranty of
merchantability or fitness of this machine for a parcular use.

How to Set Up Warranty Repair

Equipment must be repaired by a Hawk approved service provider; the dealer who sold the new
equipment or any Hawk distributor service department in the US. Repairs or alteraons made by
anyone other than the Hawk factory or a cerfied repair staon, will void the warranty.

The distributor who sold you the machine is responsible for registraon of the machine with the
factory. With this registraon, Hawk will have all of the records required for warranty claim,
including records of ownership, date of delivery and resulng warranty dates and terms,
distributor's locaon, machine model, type and serial number. To find the closest service provider,
contact Hawk Customer Service at 1-574-294-1910 or [email protected].
Warranty claims must be submied within 30 days of service request.

Replacement

In the event of a malfuncon resulng in a warranty claim, Hawk, may at its sole opon, replace the
equipment or warranted part with another new part of equal quality instead of repairing that part.

No Refund of Purchase Price

Hawk will not, as a maer of this warranty agreement, refund the end user's purchase price.

Unpacking & Checking Of Contents

Unpack your BVP25D carefully and inspect if all parts are intact. If any of the parts are
missing damaged, please contact Hawk Customer Service at [phone] or e-mail to
[email protected].

Operang Instrucons

This BVP25D requires NO ASSEMBLY. The unit is packaged and ready to be put to work.
The unit is intended to be used for drying carpet spills, drying surfaces such as bathroom
floors, venlang as well as circulang air.

1. Place the unit on the surface that needs to be dried.

2. Plug the unit into a grounded outlet .

3. Select the desired speed and posion

Floors and Carpet Maintenance

WARNING: As with all electrical equipment, the unit must be
disconnected from power before servicing or cleaning.

Ÿ Before each use, inspect the unit for damage, blocked inlets and exhaust and for

foreign material buildup.

Ÿ When the air mover is turned on, inspect the unit for excessive vibraon. In the event

of excessive vibraon or if the fan wheel rubs against the rotomolded housing,
immediately turn off the unit and have a cerfied technician inspect the unit.

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

ATTENTION!

Read all safety rules carefully before aempng to operate the
BVP25D. Please retain this manual for future reference.
NEVER operate this unit when flammable materials or vapors
are present -- electrical devices produce arcs or sparks which
may cause a fire or an explosion.
NEVER operate this unit unaended.

WARNING!

To reduce the risk of fire, electric shock or injury, follow the
direcons below:

Ÿ Do not use an extension cord with this air

mover.

Ÿ Do not use with solid state speed control

device.

Ÿ Do not allow to be used as a toy. Close

aenon is necessary when used by or near
children.

Ÿ Do not unplug by pulling on cord. To unplug,

grasp the plug, not the cord.

Ÿ Do not use with damaged cord, plug or

other parts.

Ÿ Call customer service if your air mover is not

working as it should, has missing parts, has
been dropped, damaged, le outdoors or
dropped into water.

Ÿ Do not pull or carry by cord, use cord as

handle, close a door on cord, or pull cord
around sharp edges or corners. Keep cord
away from heated surfaces.

Ÿ Do not run cord under carpeng. Do not

cover cord with throw rugs, runners or

Ÿ Use product only as described in this

manual.

Ÿ To reduce the risk of electric shock, do not

expose to rain, immerse in or use in standing
water. Store indoors only.

Ÿ Use only with GFCI-protected outlets.
Ÿ When storing or transporng, do not stack

air movers more than 5 units high.

Ÿ Electrical appliances can ignite flammable

vapors or dust. Do not use near combusble
liquids, gases or dusts.

Ÿ Do not leave plugged into outlet when not in

use or when servicing. Turn off before
unplugging.

Ÿ To reduce the risk of srring up and inhaling

toxic vapors, do not use near toxic or
hazardous materials.

Ÿ Never operate with safety grills removed.
Ÿ This unit has an automacally-operated

protecve device which may shut down the
unit during operaon. Unplug before
servicing or cleaning.

WARNING!

Ÿ To reduce the risk of electric shock, connect only to a GFCI

protected outlet. Do not expose to water

CAUTION

Ÿ This air mover has an automac motor shutoff device. It

may restart without noce.

Ÿ To reduce the risk of injury, unplug before servicing.

WARNING!

Ÿ Do not use an extension cord with this fan. To reduce the

risk of p-over during storage or transport, stack up to 5
units high only.

32

BVP25D

0 degrees

BVP25D

45 degrees

BVP25D

90 degrees

HAWK HAWK

ENTERPRISES ENTERPRISES

Hawk BVP25D User’s ManualHawk BVP25D User’s Manual

Motor Specificaons & Electrical Requirements

This BVP25D has a 1/4 HP, 3-speed, 115-volt, 60 Hz inducon motor with a grounding
conductor. Thermally protected, it will automacally shut down if overheated. The motor
will restart automacally once cooled, for as long as it is plugged into a power source.
In the event of a malfuncon or breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock.

This air mover is equipped with an 10 . 14 AWG electric power cord having an equipment
grounding conductor and a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance with all local codes and
ordinances. Do not modify the plug provided. If it will not fit the outlet, have the proper
outlet installed by a qualified electrician.

Power Cords

Ÿ Use three-pronged adapters that are UL and CE approved and with Ground Fault

Circuit Interrupter (G.F.C.I.).

Ÿ Do not use cords that show any kind of wear or damage.
Ÿ Cords are not covered by warranty

WARNING! The Total amperage of the BVP25D Air Mover plus all other
devices plugged into the receptacle must not exceed 12 amps.

Grounding Instrucons

The BVP25D must be grounded. Should it malfuncon, grounding provides a path of least
resistance for electric current and reduces the risk of electric shock. This appliance is
equipped with a cord that has an equipment-grounding conductor and a grounding plug.
The plug must be inserted into a properly installed and grounded outlet, in accordance
with all local

WARNING!

Improper
connecon of the
equipment­grounding
conductor can
result in the risk of
an electric shock.

Check with a qualified electrician or service person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the plug provided with the appliance. If plug
does not fit the outlet, have a proper outlet installed by a qualified electrician.
NOTE: In Canada, the use of a temporary adapter is not permied by the Canadian
Electrical Code

Use with 115V

3-Prong Grounded

Connection

DO NOT

Use with a 3-Prong to

2-Prong Adapter

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

54

Lubricaon

NO LUBRICATION IS NECESSARY. The motor is equipped with lifeme lubricated bearings.

Storage & Transportaon

1. Before storing your air mover, it should be cleaned.

2. Wrap the power cord around the carry handle on top of the unit to keep it untangled.

3. If you have more than one unit, store units by stacking. Do not stack more than 5 units
high.

4. Never operate unit while on its side or while stacked.

5. THE BVP50 SHOULD BE STORED INDOORS.

CAUTION:

Do not operate this air mover stacked on top of each other. Do not stack
more than 5 units high for storage.

Servicing

In order to receive service or replacement parts under warranty, you must:

1. Call [phone] for an RMA (Return Merchandise Authorizaon Number)

2. Have your proof of purchase ready.

Upon inspecon, we will advise you of the repairs needed and the cost (if applicable).
Hawk will issue repair or replacement parts depending on warranty.

Cleaning

WARNING: To reduce the risk of injury from the air mover accidentally

starng, unplug power cord before cleaning. The outside of the unit may be
cleaned with a damp cloth to remove any dust or residue.

User Servicing Instrucons
WARNING: Be sure to disconnect power supply before aempng to

service or remove any components. Do not aempt to service your air
mover beyond what is described in the user manual. For all other servicing,
follow instrucons in the Warranty secon.

HAWK HAWK

ENTERPRISES ENTERPRISES

Hawk BVP25D User’s ManualHawk BVP25D User’s Manual

rotomolded
chassis

10’ powercord

air intake
grill

motor

fan

air intake
grill

air exhaust
grill

rubber
feet

76

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

HAWK ENTERPRISES - 2902 Park Six Court, Elkhart, IN 46514

[phone] - www.hawkenterprises.com

Pr ob lem

Po ss ible C aus e

So lu tion

U nit No t R un nin g

Sw itc h i s o ff

Tu rn on

N o p ow er

Pl ug un it i n; c he ck circ uit br ea ker

Ba d out let

Ch ec k o ut let, ch an ge to a d iffe ren t
ou tle t

Fa ult y S wi tch

Re pl ace sw itc h*

Fa ult y o r b ro ken m oto r
w ire or cor d

U se vol t/a mp m ete r t o c hec k
co nt inu ity . R ep lac e m ot or wir e o r
co rd *

U nit run s b ut m ake s
lo ud , gr ati ng no ise s

Se ve re jolt ing ca us es
bl ow er wh ee l to ru b
ag ain st ho use

Re m ove an d rep lac e d am ag ed m oto r
or m oto r m ou nt s* if n ee ded

Se ve re jolt ing de fo rm ed
ho us ing

Re pl ace bl ow er wh ee l or da m age d
ho us ing *

Ex ce ssiv e v ib rat ion

Se ve re jolt ing ca us ed
m oto r s ha ft t o b en d –
un it is o ut of ba lan ce

Re m ove an d rep lac e m o tor *
D am age d b lo we r w he el
bl ad e

Re m ove r b low er w he el*

Bu ild-u p o f dir t o n o ne
sid e of b lo we r w he el

Cl ean b low er wh ee l b lad es

Bl ow er wh ee l no t
tu rn ing

Bl ow er wh ee l ja mm ed
ag ain st ho usi ng

Re m ove an d rep lac e d am ag ed m oto r
m ou nts * R ep lac e b low er w he el i f
ne ed ed *

Br ok en/ loo se ca pa cito r
w hee l; fail ed cap ac ito r

Re pl ace ca pa cito r w ir e/m ot or if
ne ed ed *

D am age d h ou sin g i s
pr ess in g o n b low er
w hee l

Re pl ace ho us ing /u nit , if nee de d*

U nit run s b ut sh uts of f
on o ver loa d

Fa ilin g m o tor be ari ng s.
In ter na l el ect ric al f aul t
in m oto r

Re pl ace m oto r*

O bst ruc tio n i n in ta ke
gr ill o r e xh au st g rill

Re m ove ob st ruc tio n

HAWK HAWK

ENTERPRISES ENTERPRISES

TroubleshootingConstruction & Parts

Hawk BVP25D User’s ManualHawk BVP25D User’s Manual

3-Speed
Switch

Two GFCI
110 V Outlets

Circuit Breaker

control
panel

switch
knob

circuit breaker
(2) 110V outlets