Page 1
INSTALLATION INSTRUCTIONS
MODEL WBI-F7 INTERIOR WINDOW BAR KIT
1996-2007 FORD CROWN VICTORIA
TOOLS REQUIRED:
Eye Safety Goggles
Power Drill
HARDWARE:
QTY DESCRIPTION PART #
12 #10 x ½” Flat head sheet metal screw GSM33150
1 Driver Side Window guard WBI-F7-1
1 Passenger Side Window guard WBI-F7-6
INSTALLATION:
1. Open door and position the guard to contour the door panel and fit evenly around the window
frame.
2. With guard positioned, mark the vehicles doorframe using the holes in the guard as a guide.
3. Remove window guard and drill the marked holes using an 1/8” drill bit.
4. Re-position the guard and attach to the doorframe using #10 x ½” flat head sheet metal screws.
1/8” Drill Bit
Phillips Screw Driver
WBI-F7-INST-9-06
Loading...