Page 1
3
INSTALL INSTRUCTIONS S-CM-112-IMP-1
RADIO RELOCATION HOUSING
2006-2009 CHEVROLET IMPALA
TOOLS REQUIRED:
Ratcheting wrench
Socket set
HARDWARE:
QTY DESCRIPTION PART #
2 Upper backing plate CM001620
1 Radio mounting bracket CM001622-IMP
8 #8 x 3/8” T-20 torx screw CM86508
2 #10 Keps nut GSM30028
Screwdriver set
T-20 torx bit
Always!
¾ Read all instructions before installing any Havis-Shields Equipment Corp products.
¾ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
¾ Use hardware provided with install kit
¾ For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html
Page 2
Remove lower plastic trim panel and
disconnect cable from lighter plugs.
Remove AM/FM radio screws, wire
harness and antenna.
Remove trim around AM/FM radio and
thermostat controls.
Attach mounting bracket to AM/FM radio
and install torx screws to hold radio.
2
S-CM-112-IMP-1_INST_11-08
Page 3
p
Mount assembled AM/FM radio bracket
and radio to main relocation housing.
Mount “hat” bracket to studded mounting
plates.
Slide studded mounting plates into the
slots used previously to hold the trim
anel that contained the lighter plugs.
Attach main relocation housing to
mounting “hat”.
Final assembly
3
S-CM-112-IMP-1_INST_11-08
Loading...