Havis-Shields KK-S-ST-SS User Manual

Tubing

(8) ¼ x ¾”

INSTALL INSTRUCTIONS KK-S-ST-SS

SLIDE OUT SIDE STEP

2004-2008 SPRINTER VAN

TOOLS REQUIRED:

Power Drill
Drill bit Set
Ratcheting wrench

HARDWARE:
QTY DESCRIPTION PART #

2 ½-13 x 4” Hex head bolt GSM33056
2 ½-13 Nylock nut GSM30020
4 ½” Flat washer GSM31009
4 3/8-16 x 1” Hex head bolt GSM33028
8 3/8” Flat washer GSM31007
4 3/8” Lock washer GSM31028
4 3/8-16 Hex nut GSM30008
8 ¼”x ¾” Hex head lag bolt GSM33060-1
1 Left side upper mounting bracket 110-000126
1 Right side upper mounting bracket 110-000148
2 Left/Right fender mounting brackets 110-000149
1 Step Assembly

½” Hardware

Tighten

outer bolts

Open-end wrench set
Standard socket set

Right side upper

Mounting Bracket

Left side upper

Mounting bracket

Left Fender

Mounting brackets

Hex head

lag bolts

Stainless Steel

Right Fender

Mounting brackets

Step Assembly

w/side slider

brackets

INSTALLATION:

1. MOUNT SIDE STEP:

• Locate (2) - ½” holes located on passenger side in the vehicle frame channel under
side door (Approx 30” apart).

• Mount the Left & Right upper mounting brackets using ½-13 x 4” bolts, washers, and
Nylock nuts through the located ½” holes in vehicle frame.

• Attach step assembly to the Left & Right upper mounting brackets using 3/8-16 x 1”
bolts, flat washers, lock washers and nuts. Be sure to attach Left/Right Fender
mounting brackets to the outer holes on the assembly.

• Tighten all hardware with the exception of hardware containing Left/Right mounting
brackets. See drawing

• With Left/Right outer mounting brackets positioned drill 5/32” holes where the
brackets meet the vehicles inner fender wall.

• Secure to vehicles inner fender using (8) ¼” x ¾” Hex head lag bolts.

Note: Extra holes are provided for alternative applications. Only (8) bolts are necessary for standard
application.

• Tighten the remaining hardware and check that step functions properly.

KK-S-ST-SS_INST_9-06