Havis-Shields F-450, GSM31005, C-VS-0309-F250, GSM30023, F-350 User Manual
...
4
INSTALL INSTRUCTIONS C-VS-0309-F250
VEHICLE SPECIFIC CONSOLE
1999-2007 FORD F-250, 350, 450, 550
TOOLS REQUIRED:
Ratcheting wrench
Sockets Set
Cutting tool (if necessary)
HARDWARE:
QTY DESCRIPTION PART #
2 ¼” x 1 ¼” Hex head bolt GSM33003
2 ¼” Flat washer GSM31005
2 ¼” Serrated nut GSM30023
4 #8 x ¼” Phillips flat head sheet metal GSM33178
1 Torx Screw kit C-HK-1
Screwdriver set
T-20 torx bit
Always!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit
For product support, visit the Install Instructions Section of our website at
http://havis.com/Installation/Installation.html, email technicalsupport@havis.com or call
1-800-524-9900.
located under the upper portion of
View of Ford F-Series dashboard
Remove (2) upper hex screws
the trim.
Remove upper portion of
dashboard as shown above
Remove (2) screws as shown
above
2
Remove enough to expose hex
screws holding lower portion of
dashboard
Remove plastic trim piece as
shown above
C-VS-0309-F250_INST_4-07
Loading...