Havis-Shields DS-PAN-413, DS-PAN-411, DS-PAN-412, PKG-DS-PAN-412-2, DS-PAN-412-2 User Manual

Owner’s Manual

Havis Rugged Mobile Docking Station
For Panasonic CF-53 Toughbook

DS-PAN-410 Series

DS-PAN-411
DS-PAN-411-2

DS-PAN-412
DS-PAN-412-2

DS-PAN-413 PKG-DS-PAN-412

PKG-DS-PAN-412-2

www.havis.com
1-800-524-9900

Before Beginning

Mounting Solutions Computing Solutions Power Management

Solutions

Transport Solutions Lighting Solutions

Product
Catalog

www.havis.com 1-800-524-9900

(Original Instructions)

Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-PAN-410 Series Docking Station for
the Panasonic CF-53 laptop computer.

For questions regarding the set-up of your DS-PAN-410 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.

This Owner’s Manual applies to the following Part Numbers:

DS-PAN-411
DS-PAN-411-2

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

• DO NOT CONNECT PERIPHERALS (USB, ETHERNET, POWER IN) SIMULTANEOUSLY
TO COMPUTER AND DOCKING STATION WHEN COMPUTER IS DOCKED OR
DAMAGE MAY OCCUR.

• ONLY COMPUTERS WITH RF PASS-THRU WILL LATCH INTO DOCKING STATIONS
EQUIPPED WITH AN ANTENNA MODULE (DS-PAN-411-2, DS-PAN-412-2, PKG-DS-PAN-412-2).
ATTEMPTING TO LATCH A COMPUTER WITH NON-RF PASS-THRU MAY RESULT IN
DAMAGE TO THE COMPUTER AND/OR DOCKING STATION.

• THE ANTENNA MODULE IS NOT A HANDLE. DO NOT USE IT TO CONNECT OR ENGAGE
THE COMPUTER TO DOCKING STATION. DO NOT USE IT TO CARRY THE DOCKING STATION.

DS-PAN-412
DS-PAN-412-2

DS-PAN-413 PKG-DS-PAN-412

PKG-DS-PAN-412-2

• THE DS-PAN-410 SERIES DOCKING STATIONS ARE DESIGNED EXCLUSIVELY FOR USE
WITH PANASONIC CF-53 TOUGHBOOK COMPUTERS ONLY AND ARE NOT BACKWARD
COMPATIBLE WITH THE PANASONIC CF-52 COMPUTER

• FOR DOCKING STATION MODELS EQUIPPED WITH AN INTEGRATED POWER SUPPLY
(DS-PAN-412, DS-PAN-412-2, PKG-DS-PAN-412, PKG-DS-PAN-412-2), REFER TO THE SUPPLIED
LIND POWER SUPPLY REFERENCE GUIDE.

2 11

Table of Contents

Specications

Parts Included

Port Replication Capability

Installation

Cable Management

Operation - Docking

Operation - Undocking

Precautions

• Do not place metal objects or containers of liquid on top of the Docking Station

• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop

• Use only the specied Power Supply (Part # LPS-103) with this Docking Station

• Do not store the Docking Station where water, moisture, steam, dust, etc. are present

• Do not connect cables into ports other than what they are specied for

• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F)

for a long period of time

Specications

Power Supply Input 15.6V DC-In

Dimensions 12.83” ( 32.54 cm) W x 13.54” ( 34.39 cm ) D x 3.44” ( 8.73 cm ) H

Weight 6.7 lbs ( 3.04 kg )

Operating Environment -20° C to 60° C ( -4° F to 140°F )

Storage Environment -40° C to 85° C ( -40° F to 185° F )

3

4

5

6

7

9

10

DECLARATION OF CONFORMITY FOR CE MARKING

Havis, Inc. declares that their DS-PAN-410 SERIES DOCKING STATIONS:
Are classied within the following EU Directives:

EU Electromagnetic Compatibility Directive 2004/108/EC

And further conform with the following EU Harmonized Standards:

EN 55022 (2006) + A1 2007, EN 55024: 1998 + A1: 2001 + A2: 2003
EN 50498: 2010

Clause 7.1 Broadband Radiated Disturbances - Quasi-Peak
Clause 7.2 Narrowband Radiated Disturbances - Average
Clause 7.3 Conducted Radiated Disturbances - Severity Level 2

Dated: August 4, 2011
Position of signatory: Chief Information Officer / Chief Financial Officer
Name of signatory: Steve Ferraro

Signed:

www.havis.com • 1-800-524-9900

Parts Included

Docking Station

Hold Down Lug Locator Pins

Mounting Bracket

Numerous hole patterns present in
Mounting Bracket will accomodate Havis
Motion Devices as well as most competitors’

Antenna Module

(DS-PAN-411-2, DS-PAN-412-2,
and PKG-DS-PAN-412-2 ONLY)

Docking Connector

Barrel Lock / Dock ReleaseFront Hold-Down Bracket Front Latching Handle

Hardware Kit

This Hardware Kit includes:

1. Zip Ties (5)

2. Keys (2)

3. 1/4”-20 x 5/8” long
Button Head Screws (8)

Tools required for installation:

• 5/32” Hex Drive

(For attaching Mounting Bracket to
Motion Device and Docking Station to
Mounting Bracket with Button Head
1/4”-20 Screws)

4 9