Havis-Shields C-TCB-32 User Manual

INSTALL INSTRUCTIONS C-TCB-32

2002-2008 CHEVROLET TRAILBLAZER & GMC ENVOY

TOOLS REQUIRED:

Ratcheting Wrench
Standard Socket Set

HARDWARE:
QTY DESCRIPTION PART #

1 5/16-18 Nylock Nut GSM30017
3 ¼-20 Serrated Nuts GSM30023
2 5/16 Flat Washers GSM31006
3 ¼-20 x ¾” Carriage Bolts GSM32000
4 ¼” x ¾” Hex Head Lag Bolt GSM33060-1
1 5/16-18 x 1” Hex Head Bolt GSM33012

Metric Socket Set
Open-end Wrench Set

Telescoping Pole

Support

SUB ASSEMBLY:

1. Mount the Telescoping Pole Support to the Pole Support Assembly as shown in view using
¼-20 x ¾” Carriage Bolts and Serrated Nuts.

2. Remove front seat bolts on passenger side seat.

Side Arm

Brace

Pole Support

Assembly

INSTALLATION:

1. MOUNT TO VEHICLE:

• Lean seat back and slide Pole Support Assembly under seat base on inner seat base
bolt on passenger side seat.

• Slide Side Arm Brace under outer seat base bolt on passenger side seat.

• Attach Side Arm Brace to Pole Support Assembly using 5/16-18 x 1” Hex Head Bolt,

Nylock nut, and flat washers.

• Replace front seat bolts on passenger side Seat and tighten.

• In remaining holes in Pole Support Assembly, pre-drill (5/32”) and attach using ¼” x

¾” Hex Head Lag bolts.

• Install laptop computer or docking station mount to TCB.

2

C-TCB-32_INST_9-07