Havis-Shields C-TCB-27 User Manual

INSTALL INSTRUCTIONS C-TCB-27

DODGE RAM 1500 PICK-UP 2002-2007

DODGE RAM 2500 & 3500 PICK-UP 2003-2007

TOOLS REQUIRED:

3/16” Allen wrench
3/8” Standard Socket Set
3/8” Metric Socket Set

HARDWARE:
QTY DESCRIPTION PART #

1 Pole support assembly CM93071-27W
1 Telescoping pole assembly CM93072-3
1 Lag bolt ¼ x 1 GSM33060

Always!

 Read all instructions before installing any Havis-Shields Equipment Corp products.
 Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
 Use hardware provided with install kit

SUB ASSEMBLY:

1. Confirm receipt of all hardware and components.

2. Remove front inner and outer passenger seat bolts on

vehicle.

INSTALLATION:

1. MOUNT C-TCB-27 INTO VEHICLE:

• Position pole support assembly on top of
passenger seat base mount and align holes in
pole support assembly with holes in seat base.

• Loosely attached factory seat bolts that were
removed during sub assembly.

• Tighten down factory passenger seat bolts and

5/16-18-nylock nut holding side support brace
to pole support assembly.

• Mount optional C-3090, computer-mounting
platform, to telescoping pole assembly using
hardware and instructions provided with
C-3090.

3/8” Ratcheting Wrench
Powered drill w/ 3/16” drill bit
Open-end wrench set

Telescoping pole

Location of

passenger side factory

seat base bolts

assembly

Pole support

assembly

C-TCB-27-INST-3-07