Page 1
INSTALL INSTRUCTIONS
C-STB-CHGR
2006-2008 DODGE CHARGER SPARE TIRE BRACKET
TOOLS REQUIRED:
Ratcheting Wrench
HARDWARE: (Uses OEM hardware for mounting bracket)
Always!
Read all instructions before installing any Havis-Shields Equipment Corp products.
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
Use hardware provided with install kit.
Metric/Standard Socket Sets
Attach C-STB-CHGR mount, as
shown above, using OEM hardware
Slide OEM bolt through jack stand,
then through C-STB-CHGR.
Completed installation shown with optional
C-TTB-CHGR slide out radio tray
Re-attach “wing” nut onto bolt
and tighten.
C-STB-CHGR_INST_9-07
Loading...