Havis UT-301 Owner's Manual
www.havis.com
1-800-524-9900
Owner’s Manual
Havis Universal Tablet Cradle
UT-301
UT-301
Before Beginning
(Original Instructions)
2 11
Havis is pleased to provide this Owner’s Manual to aid in the proper installation
and use of the UT-301 Universal Tablet Cradle.
For questions regarding the set-up of your UT-301 Universal Tablet Cradle, please
contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.
This Owner’s Manual applies to the following Part Numbers:
• NEVER STOW OR MOUNT THE UT-301 DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.
• DO NOT USE TABLET WHILE DRIVING.
• THIS UNIVERSAL TRAY (UT-301) HAS BEEN DESIGNED TO SECURELY MOUNT A WIDE ARRAY OF
TABLETS WITH AND WITHOUT CASES. AS SUCH, THE ABILITY OF THIS UNIVERSAL TRAY (UT-301) TO
RETAIN THE TABLET GIVEN A HIGH IMPULSE FORCE WILL BE DEPENDENT UPON THE END USER’S
CHOSEN TABLET, TABLET CASE, AND THE FINAL ADJUSTMENT OF THE TRAY.
END USERS ARE COMPLETELY RESPONSIBLE FOR EVALUATING THEIR VEHICLE TO ENSURE THAT THE
VEHICLE AND EACH PART OF THAT VEHICLE IS APPROPRIATE FOR THE USE OF THIS UNIVERSAL TRAY
COMPONENT. IT IS THE END USER’S SOLE RESPONSIBILITY TO ADD THE PARTS INSTALLED ON THEIR
VEHICLE ALONG WITH ANY MODIFICATIONS NECESSARY FOR THE PROPER PERFORMANCE OF THE
PRODUCT.
THIS DISCLAIMER STATEMENT IS GOVERNED BY THE LAWS OF PENNSYLVANIA. YOU HEREBY
CONSENT TO THE EXCLUSIVE JURISDICTION AND VENUE OF THE COURT OF COMMON PLEAS OF
MONTGOMERY COUNTY, PENNSYLVANIA AND ALL DISPUTES ARISING OUT OF OR RELATING TO THE
USE OF THIS PRODUCT. THE USE OF THIS PRODUCT IS UNAUTHORIZED IN ANY JURISDICTION THAT
DOES NOT GIVE EFFECT TO ALL PROVISIONS OF THESE TERMS AND CONDITIONS.
THE MANUFACTURER WILL NOT BE LIABLE FOR ANY DEFECTS CAUSED AFTER THE DELIVERY OF THE
PRODUCTS TO THE PURCHASER OR FOR ANY VARIATION NOT CAUSED BY OR BEYOND THE CONTROL
OF THE MANUFACTURER.
• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.
• THIS DEVICE WILL FIT A LARGE RANGE OF 7” & 8” TABLETS, WITH AND WITHOUT PROTECTIVE COVERS
HOWEVER, IT MAY NOT FIT ALL AVAILABLE COVERS ON THE MARKET. REFER TO COMPATIBLE TABLET
DIMENSIONS BELOW.
• HAVIS RECOMMENDS PROTECTING YOUR TABLET WITH A PROTECTIVE COVER.
• Do not store the Universal Tablet Cradle where water, moisture, steam, dust, etc. are present
• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for a long period of time
Precautions
Table of Contents
3
3
4
5
9
10
11
Specications
Parts Included
Installation
Conguration
Operation - Docking
Operation - Undocking
Cable Management
This Hardware Kit includes:
1. Zip Ties (5)
2. Keys (2)
3. M4 x 0.7 x 12mm long
Pan Head Screws (5)
4. Washers, M4 (5)
5. Lock Washers, M4 (5)
Tools required for installation:
• #2 Phillips
(For attaching Universal Tablet Cradle to mounting
surface with Pan Head M4 x 0.7 Screws)
Parts Included
Universal Tablet Cradle
Hardware Kit
(HWK-0042)
Upper Adjustment Knob
Center Adjustment Knob
Latch Handle
Barrel Lock
Lower Adjustment Knob
Lower Adjustment Knob
Strain Relief
Legs
Specications
Universal Tablet Cradle Dimensions
Overall Maximum Dimensions 10.1” ( 26.7 cm) W x 7.8” ( 19.8 cm ) H x 2.4” ( 6.1 cm ) D
Weight 0.6 lbs ( 0.27 kg )
Compatible Tablet Dimensions
Width Between 7” (17.8 cm) and 9.25” (23.5 cm)
Height Dependant on Tablet Width. Please see website.
Depth 0.79” (2.0 cm) Maximum Depth
4 9
Installation
The Universal Tablet Cradle uses a VESA 75mm hole pattern for mounting.
For additional technical support with mounting the UT-301 in your specic
work environment, please contact Havis at 1-800-524-9900.
1) Align the four holes on the mounting surface with the four Mounting Holes
on the back of the UT-301. Secure Universal Tablet Cradle to the mounting
surface using four Pan Head Screws (Hardware Kit Item #3), four Flat Washers
(Hardware Kit Item #4), and four Lock Washers, (Hardware Kit Item#5).
Torque screws to 20 in-lbs (2.3 Nm) ± 10%.
Flat Washers, M4
(Hardware Kit item #4)
Lock Washers, M4
(Hardware Kit item #5)
Pan Head Screws
(Hardware Kit item #3)
Mounting Surface
Havis Desktop Stand option shown
Part # DS-DA-218
Loading...