Havis DS-TAB-100, TC-101, DS-TAB-101, TC-102, TC-104 Owner's Manual

Owner’s Manual
Havis Tablet Docking Stations
and Tablet Cases

DS-TAB-100 Series

DS-TAB-101

DS-TAB-102

DS-TAB-104

TC-100 Series

TC-101

TC-102

TC-104

DS-TAB-100^TC-100-SERIES_OMN_12-18

Havis, Inc.

75 Jacksonville Road

Warminster, PA 18974

Before Beginning

Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the
DS-TAB-100 Series Docking Stations and TC-100 Series Tablet Cases.
For questions regarding the set-up of your DS-TAB-100 Series Docking Station or TC-100 Series Tablet Case,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.

• DO N

OT USE TABLET WHILE DRIVING.

• READ A

• DO N

ARE PRESENT

• LITHIUM-I

TABLET MANUFACTURER OWNER’S MANUAL FOR DETAILS.

LL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

OT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC.

ON BATTERIES TYPICALLY CHARGE BEST BETWEEN 5°C to 45°C (41°F to 113°F ). PLEASE REFER TO YOUR

Product Compatibility

Table t

Apple iPad 10.5

Pro (Gen I)

Samsung

Galaxy S3

Samsung

Active 2

TC-100

Table t Case

TC-101 PKG-TAB-APP1 N/A

TC-102 PKG-TAB-SAM6 PKG-TAB-SAM1

TC-104 PKG-TAB-SAM4 PKG-TAB-SAM3

DS-TAB-101 Docking Station

(Charge Only)

DS-TAB-102 Docking Station

(USB-C Charge & Data)

Specifications

DS-TAB-100 Series

(TC-100 Series Specifications vary by model and are supplied with Tablet Case)

Power Supply Input 12V Nominal (10-17 VDC Input)

Dimensions 9.01” (22.89 cm) H x 6.00” (15.24 cm) W x 1.40” (3.56 cm) D

Weight 0.77 lbs. (0.35 kg)

Operating Environment Please refer to your Tablet Manufacturer Owner’s Manual for operating range.

Storage Environment -20° C to 85° C (-4° F to 185° F)

Havis Product Only, please refer to your Tablet Manufacturer Owner’s Manual for
storage range.

Precautions

• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet

• Use o

• Do n

• Do n

• Do not dock Tablet Case if Docking Connector Pins are bent or damaged

EC DECLARATION OF CONFORMITY in accordance with EN 50498

Manufacturers Name: Havis, Inc.
Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USA
Declares under our sole responsibility that the product:

Is in conformity with the following standards or other normative documents:

Supplementary Information:

The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8, and 6.9. This product requires the
use of a recommended e-Marked automotive power supply when used within vehicles.

nly the specified Power Cable with this Docking Station
ot connect cables into ports other than what they are specified for
ot leave the Docking Station in a high temperature environment (greater than 85°C, 185°F) for

a long period of time

Product name: Havis Docking Station For X Tablets, where ‘X’ denotes tablets listed in product compatibility matrix.
Model: DS-TAB-10X, where ‘X’ may be any alphanumeric character and which describes product options.

May be followed by any alphanumeric characters which describe product options.

Product Options: This declaration covers all options of the above product which bear the CE Marking.

Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) ­2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

Warminster, PA, USA September 20, 2018 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-TAB-10X not expressly
approved by Havis, Inc. could void the user's authority to operate this equipment.

Parts Included (DS-TAB-100 Series)

Docking Station

Release Handle

Alignment Posts

Latch Hook

LED Power Indicator

Front Hooks

Barrel Lock

Docking Connector

Ports

Mounting Holes (x4)

(VESA 75mm Hole Pattern)

Strain Relief and

Cable Routing Channels

Power Cable

(DS-DA-325)

Parts Included

(DS-TAB-100 Series)

Hardware Kit (HWK-0042)

(continued)

This Hardware Kit includes:

1. Zip Ties (5)

2. Keys (2)

3. M4 x 0.7 x 12mm Long Screws (5)

4. Flat Washers, M4 (5)

5. Lock Washers, M4 (5)

Tools required for installation:

• #2 Phillips
(For attaching Docking Station to VESA 75mm

hole pattern equipment with M4 x 0.7 x 12mm Screws)

Port Replication Capability

Downward Facing Ports





(DS-TAB-100 Series)







USB 2.0 (x2)Power Input

DS-TAB-101: Charge Only

DS-TAB-102: Charge & Data

Installation

(DS-TAB-100 Series)

1) Align Docking Station mounting holes with the hole pattern on mounting device. Using the
four (4) M4 0.7 x 12mm Pan Head Screws (Hardware Kit Item 3), four (4) Washers, M4
(Hardware Kit Item 4), and four (4) Lock Washers, M4 (Hardware Kit Item 5), secure the
Docking Station to device. Torque screws to 15 in-lbs (1.7Nm) ± 10%

A) Havis Desktop Stand installation (sold separately, Part # DS-DA-218).

Washer, M4

Lock Washer, M4

M4 x 0.7 x 12mm
Pan Head Screws

B) In-Vehicle mounting system installation (not included).

Desktop Stand

(not included)

Washer, M4

Lock Washer, M4

M4 x 0.7 x 12mm
Pan Head Screws

Mounting Device

(Part ID: C-MD-402 shown, not included)