Havis DS-APP-102, PKG-DS-APP-102, PKG-DS-APP-112, PKG-DS-APP-122, PKG-DS-APP-132 Owner's Manual

Owner’s Manual

Havis Docking Station For the
Havis iPad Protective Case

www.havis.com
1-800-524-9900

DS-APP-102
PKG-DS-APP-102
PKG-DS-APP-112
PKG-DS-APP-122
PKG-DS-APP-132

DS-APP-100 Series

DS-APP-102
PKG-DS-APP-102

PKG-DS-APP-112
PKG-DS-PAN-122

PKG-DS-PAN-132

Before Beginning

(Original Instructions)

2 11

Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-APP-100 Series Docking Station for
the Havis iPad Protective Case.

For questions regarding the set-up of your DS-APP-100 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.

Use the supplied power cable to charge your iPad once its securely docked.
Plug barrel connector into the back of the Docking Station, and the cigarette
lighter adaptor into the vehicle power source.

This Owner’s Manual applies to the following Part Numbers:

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

Supplying Power to iPad

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

EC DECLARATION OF CONFORMITY in accordance with EN 45014

Manufacturers Name: Havis, Inc.
Manufacturers Address: 47801 Anchor Court, Plymouth Twp, MI 48170 USA

Declares under our sole responsibility that the product:

Product name: Havis Docking Station For Havis iPad Protective Case
Model: DS-APP-1XX, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following standards or other normative documents:

EMC Directive 2004/108/EC: EN 55022:2010, Class B, Information technology equipment ­ Radio disturbance characteristics - Limits and methods of measurement

EN 55024:2010, Information technology equipment - Immunity characteristics ­ Limits and methods of measurement

Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

BS EN 50498:2010: Section 7, after market electronic equipment in vehicles.

Supplementary Information:

The product herewith complies with the requirements of the EMC Directive 2004/108/EC. This product requires the
use of the provided e-Marked automotive power supply when used within vehicles.

Plymouth twp, MI, USA March 14, 2014 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-APP-1XX not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.

www.havis.com • 1-800-524-9900

Table of Contents

Specications
Port Replication Capability
Parts Included
Installation
Cable Management
Operation - Docking
Operation - Undocking
Supplying Power to iPad

3
4
4
6
8
9
10
11

Specications

Power Supply Input 12.0 V DC-In

Dimensions 10.8” ( 27.5 cm) H x 6.9” ( 17.6 cm ) W x 3.1” ( 8.0 cm ) D

Weight 1.6 lbs ( 0.68 kg )

Operating Environment 0° C to 35° C ( 32° F to 95°F )

Storage Environment -40° C to 85° C ( -40° F to 185° F )

• Do not place metal objects or containers of liquid on top of the Docking Station

• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet

• Do not store the Docking Station where water, moisture, steam, dust, etc. are present

• Do not connect cables into ports other than what they are specied for

• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F)

for a long period of time

Precautions

4 9

1. Zip Ties (5)

2. Keys (2)

3. 1/4”-20 x 5/8” long Button Head Screws (5)

4. M4 x 0.7 x 12mm long Pan Head Screws (5)

5. Washers, M4 (5)

6. Lock Washers, M4 (5)

Extra hardware (screws) provided

Tools required for installation:

• 5/32” Hex Drive

(For attaching Docking Station to Mount with Button Head 1/4”-20 Screws)

• #2 Philips Screwdriver

(For attaching Docking Station to VESA 75mm hole pattern equipment
with Pan Head M4 x 0.7 x 12mm Screws)

Hardware Kit

Port Replication Capability

Parts Included

TOP

of Docking Station

BOTTOM

of Docking Station

LED
Power Indicator

Operation - Docking

1) Ensure Docking Station is unlatched by lifting Latch Handle.

2) Hold tablet in landscape orientation, with bottom angled toward

Docking Station. Lower tablet into the bottom of the Docking Station.

Alignment Posts
DS-PAN-500 Series Docking Station

NOTE: Ensure a proper connection by aligning the tablet’s

Alignment Sockets with the Docking Station’s Alignment Posts

Power Input

PWR

DC IN 12V