Havis DS-GTC-701, DS-GTC-703, DS-GTC-701-2, DS-GTC-704, DS-GTC-704-2 Owner's Manual

Owner’s Manual

Havis Docking Station

For Getac Z710 & ZX70 Rugged Tablets

www.havis.com
1-800-524-9900

DS-GTC-701
DS-GTC-701-2
DS-GTC-703
DS-GTC-703-2

DS-GTC-704
DS-GTC-704-2
DS-GTC-705
DS-GTC-705-2

DS-GTC-706
DS-GTC-706-2

DS-GTC-700 Series

DS-GTC-701
DS-GTC-701-2

DS-GTC-703
DS-GTC-703-2

DS-GTC-704
DS-GTC-704-2

DS-GTC-705
DS-GTC-705-2

DS-GTC-706
DS-GTC-706-2

Before Beginning

(Original Instructions)

2 11

Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-GTC-700 Series Docking Station for
the Getac Z710 & ZX70 Rugged Tablets.

For questions regarding the set-up of your DS-GTC-700 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.

This Owner’s Manual applies to the following Part Numbers:

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

• DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE,
STEAM, DUST, ETC. ARE PRESENT

• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR
UNDOCKING WITH YOUR COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES
CAN CAUSE PERMANENT DAMAGE.

• A PROPER VEHICLE POWER CONNECTION IS ESSENTIAL TO PREVENT DAMAGE TO THE
DOCK AND/OR TABLET. Please refer below to the proper power connection:

- DS-GTC-701, DS-GTC-701-2, DS-GTC-704, DS-GTC-704-2, DS-GTC-705, DS-GTC-705-2 –
These docking stations may be connected directly to the vehicle power source using the
included fused input power cable.

- DS-GTC-703, DS-GTC-703-2, DS-GTC-706, DS-GTC-706-2 – These connect directly to the
tablet and require a certied, automotive grade, Getac approved 55W power source rated
for a continuous, regulated 12VDC output (Havis Part Number LPS-139 or equivalent).
DO NOT CONNECT VEHICLE POWER DIRECTLY TO THE TABLET. Failure to comply with these
requirements will cause damage to the tablet.

• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY
(DS-GTC-706, DS-GTC-706-2), REFER TO THE SUPPLIED GETAC POWER SUPPLY REFERENCE GUIDE.

• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN
0°C to 50°C (32°F to 122°F).

PLEASE REFER TO GETAC Z710/ZX70 OWNER’S MANUAL FOR MORE INFORMATION.

Related Products

Havis offers a wide variety of accessory products specically for use
with the DS-GTC-700 Series Docking Station. For more information or
to order, please visit www.havis.com.

Table of Contents

Specications
Parts Included
Port Replication Capability
Antenna Identication
Installation
Cable Management
Operation - Docking
Operation - Undocking

3
4
5
5
6
7
8
10

• Do not place metal objects or containers of liquid on top of the Docking Station

• If a malfunction occurs, immediately unplug the Power Supply and remove the tablet

• Use only the specied Power Supply (Part # LPS-139) with this Tablet

• Do not connect cables into ports other than what they are specied for

• Do not leave the Docking Station in a high temperature environment (greater than 70°C, 158°F)
for a long period of time

Precautions

Specications

Power Supply Input 12.0 V DC-In

Dimensions 8.7” ( 22.1 cm) H x 9.2” ( 23.4 cm ) W x 2.9” ( 7.4 cm ) D

Weight 1.5 lbs ( 0.68 kg )

Operating Environment -20° C to 50° C ( -4° F to 122°F )

Storage Environment -40° C to 70° C ( -40° F to 158° F )

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-GTC-70X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.

EC DECLARATION OF CONFORMITY

Manufacturers Name: Havis, Inc.
Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USA

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Product name: Tablet Docking Station
Model: DS-GTC-70x, where ‘x’ may be any alphanumeric character and which describes product options.

(Object of Declaration) May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following directives, standards, or other normative documents:

EMC Directive 2014/30/EU EN 55022::2010/AC:2011
EN 55024:2010

RoHS Directive 2011/65/EU EN 50581:2012

The object of the declaration described above is in conformity with Directive 2011/65/EU of the European Parliament and of the
Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment.

Supplementary Information:

The object of the declaration described above is in conformity with the relevant Union harmonisation legislation.

Signed for and on behalf of Havis, Inc.:
Warminster, PA, USA June 10, 2014 Bruce Jonik, Director of Engineering , Havis, Inc.

4 9

Hardware Kit

Fused Input Power Cable

(Replacement Part #: DS-DA-320)

Docking Station

Operation - DockingParts Included

2) Hold tablet in landscape orientation, and guide into the Docking Station.

Next, lower tablet into the bottom of the Docking Station, while ensuring
that the alignment sockets are aligned with the Docking Station’s
Alignment Posts.

3) When tablet is properly seated in the Docking Station, lower the Latch

Handle to secure tablet in place.