Havis DS-GTC-411-3, DS-GTC-412, DS-GTC-400, DS-GTC-411, DS-GTC-412-3 Owner's Manual

Owner’s Manual

Havis Docking Station
For Getac T800 Rugged Tablet

www.havis.com
1-800-524-9900

DS-GTC-411
DS-GTC-411-3

DS-GTC-412
DS-GTC-412-3

DS-GTC-413
DS-GTC-413-3

DS-GTC-400 Series

DS-GTC-411
DS-GTC-411-3

DS-GTC-412
DS-GTC-412-3

DS-GTC-413
DS-GTC-413-3

Before Beginning

(Original Instructions)

2 11

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE
AIRBAG DEPLOYMENT ZONE.

• DO NOT USE COMPUTER WHILE DRIVING.

Havis is pleased to provide this Owner’s Manual to aid in the proper
installation and use of the DS-GTC-410 Series Docking Station for
the Getac T800 Rugged Tablet.

For questions regarding the set-up of your DS-GTC-410 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional
product support and information.

This Owner’s Manual applies to the following Part Numbers:

• FOR DOCKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY
(DS-GTC-412, DS-GTC-412-3) REFER TO THE SUPPLIED LIND POWER SUPPLY REFERENCE GUIDE.

• WHEN TABLET IS DOCKED, THE BATTERY WILL ONLY CHARGE BETWEEN
0°C to 50°C (32°F to 122°F).

PLEASE REFER TO GETAC T800 OWNER’S MANUAL FOR MORE INFORMATION.

• READ ALL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

• DO NOT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE,
STEAM, DUST, ETC. ARE PRESENT

• DO NOT DOCK OR UNDOCK YOUR COMPUTER UNLESS IT IS POWERED OFF. DOCKING OR
UNDOCKING WITH YOUR COMPUTER IN ON, STANDBY, HIBERNATION, OR SLEEP MODES
CAN CAUSE PERMANENT DAMAGE.

• FOR THE DS-GTC-411, DS-GTC-411-3, DS-GTC-412 & DS-GTC-412-3 DOCKING STATIONS:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product requires
a certied, automotive grade, Getac approved 95W power source rated for a
continuous, regulated 19VDC output (Havis Part Number LPS-116 or equivalent).
Failure to comply with this requirement will cause product damage that is NOT
repairable and is NOT covered under warranty.

• FOR THE DS-GTC-413 & DS-GTC-413-3 DOCKING STATION:
DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: The Getac T800 tablet
requires a certied, Getac approved power source rated for a continuous, regulated
19VDC output. Failure to comply with this requirement will cause product damage
that is NOT repairable and is NOT covered under warranty.

Related Products

Havis offers a wide variety of accessory products specically for use
with the DS-GTC-410 Series Docking Station. For more information or
to order, please visit www.havis.com.

Table of Contents

Specications

Parts Included

Port Replication Capability

Antenna Identication

Installation

Cable Management

Operation - Docking

Operation - Undocking

3

4

5

5

6

7

8

10

Specications

Power Supply Input 19.0V DC-In

Dimensions 8.1” ( 20.7 cm) H x 7.0” ( 17.8 cm ) W x 3.5” ( 8.9 cm ) D

Weight 1.6 lbs ( 0.75 kg )

Operating Environment -20° C to 60° C ( -4° F to 140°F )

Storage Environment -51° C to 71° C ( -60° F to 160° F )

• Do not place metal objects or containers of liquid on top of the Docking Station

• If a malfunction occurs, immediately unplug the Power Supply and remove the laptop

• Use only the specied Power Supply (Part # LPS-116) with this Docking Station

• Do not connect cables into ports other than what they are specied for

• Do not leave the Docking Station in a high temperature environment (greater than 85°C, 185°F)
for a long period of time

Precautions

EC DECLARATION OF CONFORMITY in accordance with EN 50498

Manufacturers Name: Havis, Inc.
Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USA

Declares under our sole responsibility that the product:

Product name: Havis Docking Station For Getac T800 Fully Rugged Tablet
Model: DS-GTC-41X, where ‘X’ may be any alphanumeric character and which describes product options.
May be followed by any alphanumeric characters which describe product options.
Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following standards or other normative documents:

Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) ­ 2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles

Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

Supplementary Information:

The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8,
and 6.9. This product requires the use of a recommended e-Marked automotive power supply when used within vehicles.

Plymouth twp, MI, USA August 21, 2014 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modications
to the model DS-GTC-41X not expressly approved by Havis, Inc. could void
the user's authority to operate this equipment.

4 9

Docking Station

Parts Included

Locator Pin

Ports

Strain Relief

RF Antenna to Tablet Interface

Docking Connector

Barrel Lock

Mounting Holes (x4)

(VESA 75)

Latch Hook

Operation - Docking

2) Hold tablet in landscape orientation, with bottom mounted docking

connector angled toward Docking Station. Lower tablet into the bottom
of the Docking Station.

3) Pivot tablet so the top aligns with the Locator Pin at the top of the

Docking Station. Depress the Latch Handle to secure tablet in place.
You will hear an audible click when Latch Hook is fully engaged.

4) For theft deterrence, secure tablet by locking Docking Station with

supplied key (Hardware Kit Item 2).