Havis DS-DELL-411, DS-DELL-413, DS-DELL-414, DS-DELL-414-3, DS-DELL-415 Owner's Manual

Owner’s Manual
Havis Docking Station
For Dell Latitude Rugged Extreme Notebooks

DS-DELL-410 Series

DS-DELL-411

DS-DELL-411-3

DS-DELL-412

DS-DELL-412-3

DS-DELL-413

DS-DELL-413-3

DS-DELL-414

DS-DELL-414-3

DS-DELL-415

DS-DELL-415-3

DS-DELL-416

DS-DELL-416-3

DS-DELL-417

DS-DELL-417-3

DS-DELL-418

DS-DELL-418-3

DS-DELL-410-SERIES_OMN_12-18

Havis, Inc.

75 Jacksonville Road

Warminster, PA 18974

Before Beginning

Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the
DS-DELL-410 Series Docking Station for the Dell Latitude Rugged Extreme Notebooks.
For questions regarding the set-up of your DS-DELL-410 Series Docking Station,
please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information.

This Owner’s Manual applies to the following Part Numbers:

DS-DELL-411
DS-DELL-411-3
DS-DELL-412
DS-DELL-412-3

• NEVER STOW OR MOUNT THE DOCKING STATION DIRECTLY IN A VEHICLE AIRBAG DEPLOYMENT ZONE.

• DO N

OT USE COMPUTER WHILE DRIVING.

DS-DELL-413
DS-DELL-413-3
DS-DELL-414
DS-DELL-414-3

DS-DELL-415
DS-DELL-415-3
DS-DELL-416
DS-DELL-416-3

DS-DELL-417
DS-DELL-417-3
DS-DELL-418
DS-DELL-418-3

• READ A

• DO N

LL INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION.

OT STORE, INSTALL, OR OPERATE THE DOCKING STATION WHERE WATER, MOISTURE, STEAM, DUST, ETC.

ARE PRESENT

• FOR T

HE DS-DELL-411, DS-DELL-411-3, DS-DELL-412, DS-DELL-412-3, DS-DELL-415, DS-DELL-415-3, DS-DELL-416, &
DS-DELL-416-3 DOCKING STATIONS: DO NOT CONNECT DIRECTLY TO VEHICLE VOLTAGE SOURCE: This product
requires a certified, automotive grade, Dell approved 90W power source rated for a continuous, regulated

19.5VDC output (Havis Part Number LPS-137 or equivalent). Failure to comply with this requirement will cause
product damage that is NOT repairable and is NOT covered under warranty.

• THE DS-DE

LL-414, DS-DELL-414-3, DS-DELL-417, & DS-DELL-417-3 DOCKING STATIONS MUST BE USED WITH

POWER CABLE (PART # DS-DA-316). THIS CABLE INCLUDES A 15AMP PROTECTION FUSE.

• FOR DO

CKING STATION MODELS EQUIPPED WITH A BUNDLED POWER SUPPLY (DS-DELL-412, DS-DELL-412-3,
DS-DELL-416, DS-DELL-416-3, DS-DELL-418, DS-DELL-418-3) REFER TO THE SUPPLIED LIND POWER SUPPLY
REFERENCE GUIDE.

Precautions

• Do not place metal objects or containers of liquid on top of the Docking Station.

• If a

malfunction occurs, immediately unplug the Power Supply and remove the laptop.

• Use o

nly the specified Power Supply (Part # LPS-137, LPS-126, or LPS-127) with this Docking Station, or

Internal Power Supply Cable (Part # DS-DA-316) with Internal Power Supply Docking Stations.

• Do n

• Do n

ot connect cables into ports other than what they are specified for.
ot leave the Docking Station in a high temperature environment (greater than 71°C, 160°F) for a long

period of time.

Specifications

Power Supply Input/Output DS-DELL-411/411-3

DS-DELL-412/ 412-3
DS-DELL-415/415-3
DS-DELL-416/416-3

DS-DELL-414/414-3
DS-DELL-417/ 417-3

External Power Supply

(LPS-137 DC-DC)
(LPS-126)
(LPS-127)

Internal Power Supply

(DS-DA-316 Cable)

INPUT

12-16V DC-In
20-60V DC-In
12-32V DC-In

10-17 VDC

OUTPUT

19.5V DC

19.5V DC

19.5V DC

Dimensions 11.83” (30.00 cm) H x 12.88” (32.70 cm) W x 3.50” (8.89 cm) D

Weight 5.5 lbs ( 2.49 kg )

Operating Environment -10° C to 50° C (14° F to 122° F)

Storage Environment -20° C to 60° C (-4° F to 140° F)

EC DECLARATION OF CONFORMITY in accordance with EN 50498

Manufacturers Name: Havis, Inc.
Manufacturers Address: 75 Jacksonville Road, Warminster, PA 18974 USA
Declares under our sole responsibility that the product:

Product name: Havis Docking Station For Dell Latitude Rugged Extreme Notebooks
Model: DS-DELL-41X, where ‘X’ may be any alphanumeric character and which describes product options.

Product Options: This declaration covers all options of the above product which bear the CE Marking.

Is in conformity with the following standards or other normative documents:

Automotive EMC Directive EN 50498:2010, Electromagnetic compatibility (EMC) ­2004/108/EC: Product family standard for aftermarket electronic equipment in vehicles
Directive 2011/65/EU Restriction of the use of certain hazardous substances (RoHS)

Supplementary Information:

The product herewith complies with the requirements of the Automotive EMC Directive 2004/108/EC, Annex I, 6.5, 6.6, 6.8, and 6.9. This product requires the
use of a recommended e-Marked automotive power supply when used within vehicles.

May be followed by any alphanumeric characters which describe product options.

Warminster, PA, USA August 13, 2018 Bruce Jonik, Director of Engineering , Havis, Inc.

FCC 47CFR, Part 15 compliance: This is an FCC Class B device. Any changes or modifications to the model DS-DELL-41X not expressly
approved by Havis, Inc. could void the user's authority to operate this equipment.

Parts Included

Docking Station

Rear Hook

Rear Fences

Strain Relief Points

Docking Connector

Barrel Lock

Latching Handle

Mounting Bracket

Locator Pins

Front Hook

Release Buttons

and Lockout Holes

Front Hooks

Power Cable

(For DS-DELL-414, DS-DELL-414-3, DS-DELL-417, & DS-DELL-417-3 only)

Parts Included (continued)

Hardware Kit (HWK-0054)

This Hardware Kit includes:

1. Zip Ties (4)

2. Keys (2)

3. 12mm long Pan Head Lockout Screws (3)

4. 1/4” – 20 x 5/8” long Pan Head Screws (9)

Tools required for installation:

• 5/32” Hex Drive
(For attaching Mounting Bracket to Motion

Device with Button Head ¼”-20 Screws)

• T10 Torx Drive
(For 12mm long Lockout Screws)









Antenna Identification

DS-DELL-411-3, DS-DELL-412-3, DS-DELL-413-3, DS-DELL-414-3, DS-DELL-415-3, DS-DELL-416-3, DS-DELL-417-3, DS-DELL-418-3

A – WIFI
B – GPS
C- CELLULAR

Rearward Facing
Antenna Connectors (TNC)

Laptop Interface

A

CB