Page 1
OUTER ADAPTER PLATE
INNER ADAPTER PLATE
4X 1/4"-20 THREADED INSERT
4X 1/4"-20 X 5/8" PHMS
WARNING!
USE SELF LOCKING HARDWARE
OR THREAD LOCKING ADHESIVE,
WHEN FASTENING THIS ADAPTER
TO DOCKS AND MOUNTING DEVICES
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
OFFSET ADAPTER PLATE
9-18-13
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
C-ADP-101-INST
PRODUCT DESCRIPTION
ADAPTS A COMPUTER MOUNT TO A MOTION
DEVICE OF TWO DIFFERENT COMPANIES
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
DRAWING NUMBER:
C-ADP-101
HARDWARE :
INSTALLATION INSTRUCTIONS:
1. Find adapter plate with matching hole/slot pattern to
device being mounted. Position Adapter Plate to the
bottom of the device. Note that the orientation of the
Adaptor Plates should be such that when the 2 Adapter
Plates are assembled the slots on the outer plate will be
running side-to-side.
2. Line up device mounting holes with holes/slots on
respective Adapter Plate.
3. Use device mounting screws to mount Adapter Plate
to device. Tighten to manufacturer's recommended
torque (screws not provided).
4. Position the remaining Adapter Plate to the top of the
motion device.
5. Align motion device mounting holes with holes/slots
on remaining Adapter Plate.
6. Use motion device mounting screws to mount the
second Adapter Plate to the motion device. Tighten to
manufacturer's recommended torque (screws only
provided for Havis C-MD-200 series).
7. Once one Adapter Plate is assembled to the device to
be mounted and the other is mounted to the motion
device, bring 2 Adapter Plates together and align
threaded inserts from Inner Plate with slots on side
flanges of the Outer Plate.
8. Assemble 4X 1/4"-20 X 5/8" PHMS through holes and
into threaded inserts. Leave screws loose until all are
started into threaded inserts. If space limitations do not
allow for the installation of all 4 screws, you may
eliminate the use of one screw. DO NOT OVER TIGHTEN.
WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
2.09
WWW.HAVIS.COM
1-800-524-9900
F-730-019 REV A
Page 2
GAMBER JOHNSON
MOUNTING SLOTS
VESA 100mm
MOUNTING HOLES
VESA 75mm
MOUNTING HOLES
JOTTO DESK
RAM 1-1/2" BALL
MOUNTING HOLES
RAM 2-1/4" BALL
MOUNTING HOLES
HAVIS
MOUNTING SLOTS
VARIOUS HAVIS
MOUNTING
HOLES ON INNER
ADAPTER PLATE
VESA 100mm
MOUNTING HOLES
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
UNIVERSAL ADAPTER
PLATE
9-18-13
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
C-ADP-101-INST
PRODUCT DESCRIPTION
ADAPTS A COMPUTER MOUNT TO A MOTION
DEVICE OF TWO DIFFERENT COMPANIES
D
C
B
A
A
B
C
D
1
2
3
4
5
6
7
8
8
7
6
5
4
3
2
1
PRODUCT I.D.
DATE
WEIGHT: (LBS)
PRODUCT NAME
REV. DATE
DRAWING NUMBER:
C-ADP-101
WARNING: ALL HAVIS INC. PRODUCTS ARE DESIGNED WITH SAFETY OF USE AND INSTALLATION IN MIND. HOWEVER,
IT IS THE SOLE RESPONSIBILITY OF THE OWNER/OPERATOR OF A VEHICLE USING HAVIS INC. MOUNTING AND
DOCKING EQUIPMENT, TO INSURE THAT THE EQUIPMENT IS INSTALLED SO THAT IT WILL NOT INTERFERE WITH VEHICLE
OPERATION, INTERFERE WITH SAFETY DEVICES, OBSTRUCT VIEW OF DRIVING CONDITIONS, OR IN ANY WAY
DEGRADE OCCUPANT SAFETY. IMPROPER INSTALLATION CAN CAUSE SERIOUS INJURY IN THE EVENT OF AN
ACCIDENT. INSTALLATION SHOULD ONLY BE PERFORMED BY QUALIFIED PROFESSIONALS. COMPUTERS AND
MOTION DEVICES MUST BE MOVED TO AND STOWED/SECURED IN THEIR SAFE DRIVING POSITIONS BEFORE
OPERATING VEHICLE.
2.09
WWW.HAVIS.COM
1-800-524-9900
F-730-019 REV A
Loading...