Hauppauge WinTV-NOVA-HD-S2, WinTV-HVR-4000 User Manual

Page 1

Page 2 Page 3 Page 4

Insert your WinTV Installation CD­ROM and click on Start then
Computer, you should then see
the HCW3_x CD, double click on this CD-ROM then double click on the
file called HCWDriverInstall.

WinTV-HVR-4000

WinTV-NOVA-HD-S2

Quick Installation Guide

for Windows XP / Vista 32-bit

© 2007 Hauppauge Computer Works · QI-WINTV-SC-V1.1-ENG · 2007/06/25

● WinTV-HVR-4000 or

WinTV-NOVA-HD-S2 PCI board

● Remote control transmitter with

2 AAA batteries

● Remote control receiver

with velcro dot fastener

● FM Radio antenna

(WinTV-HVR-4000 only)

● S-Video/Composite Adapter

(WinTV-HVR-4000 only)

● Installation CD-ROM with:

· CyberLink PowerCinema 5.1

1. Contents of the WinTV-package

Hauppauge Computer Works, Ltd.

10 Borough High Street
Bank Chambers
London, UK, SE1 9QQ
www.hauppauge.co.uk

Tech Support: ([phone]
Telephone: [phone]
Fax: [phone]

Hauppauge Computer Works, Inc.

91 Cabot Court
Hauppauge, NY 11788
www.hauppauge.com

Tech Support: ([phone]
Telephone: [phone]
Fax: [phone]

Hauppauge Digital Asia, Pte. Ltd.

Blk 1093, Lower Delta Road #04-05
Tiong Bahru Industrial Estate
Singapore 169204
www.hauppauge.com.sg

Tech Support: ([phone]
Telephone: [phone]
Fax: [phone]

N

ote: Your PC could be damaged by electrostatic discharge.
Avoid this by contacting the earthed chassis of your PC,
before you open it or touch the PCI card.

To install, switch off the computer and remove the computer cover. The
manufacturer of your PC supplies instructions on removing the PC cover.

● Locate a free PCI slot (a short white slot). Unscrew and remove the

metal cover plate which covers the back of the empty slot.

● Plug the WinTV board into the PCI slot, and screw the WinTV metal

cover plate to the PC.

2. Installing the WinTV-board

WinTV-HVR-4000

With the HVR you can watch and record analog TV, DVB-Terrestrial,
DVB-Satellite and DVB-S2 HD channels. You can also connect sources
via the composite and S-Video inputs and listen to FM Radio as well.

You can now connect the leads provided to the WinTV-HVR-4000 in
the following order.

FM FM Radio-Antenna
TV TV-Antenna
SAT SAT-Cable from the LNB of your satellite dish
S-VIDEO IN S-Video-Input *
LINE IN Stereo-Audio-Input, from the output of your source
IR Input for the Infra-red-Sensor

N

ote: for using a RCA Yellow Phono composite input you
must use the supplied S-Video to composite adapter.

WinTV-NOVA-HD-S2

With the WinTV-NOVA-HD-S2 you can watch and record DVB-Satellite
and DVB-S2 HD channels.

You can now connect the leads provided to the WinTV-NOVA-HD-S2
in the following order.

SAT SAT-Cable from the LNB of your satellite dish
IR Input for the Infra-red-Sensor

3. Connections of the WinTV-board

DVB-T (WinTV-HVR-4000 only)

Please ensure that you have a suitable TV aerial connected to the
WinTV card. You should then ensure you are located in a area that
supports Digital Terrestrial TV by visiting:
www.dtg.org.uk/retailer/coverage.html and entering your post code.

If your area does have digital Terrestrial TV coverage, please check
your TV antenna as most antenna’s that are over 8 years old may not
support the Digital Terrestrial TV broadcasts and you may need to
update yours to a ‘Wideband or Highgain’ antenna.

DVB-S/DVB-S2

Please ensure that your satellite dish is correctly aligned and the Sat
cable is connectly directly from the LNB and not via a set top box.

4. WinTV DVB reception advice

To start the software installation, click Start / Run then type your CD­ROM drive letter (for example: D:\) and then Setup.exe.

6. CyberLink Software Installation

Click Next and follow the on
screen instructions to install the
software.

Once the installation is complete,
please re-start your computer.

Select the type of speaker setup
that you are using and click Next.

PowerCinema detect the TV
tuners.

The WinTV-HVR-4000 has a
Hybrid tuner and can be config­ured for all types of signals:

1.Analogue (Cable TV and
Antenna)

2.DVB-T (Digital Terrestrial)

3.DVB-S (Digital Satellite)
and DVB-S2 (Digital Satellite HD)

In addition you can also connect
a composite or S-Video source (Hi-8 camcorder, VCR, cable or satel­lite box).

The WinTV-NOVA-HD-S2 has a HD satellite tuner and can be config-
ured for DVB-S (and HD DVB-S2) only.

You need to ensure that you have connected the cables correctly
before performing a channel scan.

You can configure or change the signal input by selecting Settings /
TV / Signal settings.

The Setup Wizard will appear
which will guide you through the
setup and configuration of the
application, click Next.

Select the type of screen that you
are using (4:3 is normal TV /
Monitor screen size and 16:9 is a
widescreen TV / Monitor) and
click Next.

Select the region that you are
located in and click Next.

Select the signal type that you
want to configure and click Next.

Scanning for DVB-S channels will
also scan for HD DVB-S2 channels.

Select the location where you
want to save recorded TV files
and click Next.

TV Setup (WinTV-HVR-4000 only)

If you have a cable system con­nected click on Scan Channels, if
you do not then click Next and
Scan Channels for scanning TV
antenna channels.

Once the channel scan is finished
click on Next.

Digital DVB-T Setup
(WinTV-HVR-4000 only)

Select Scan Channels to start the
channels scan.

When complete click on Next.

The DVB-T EPG allows you to
view now and next channel pro­gram information, refer to the
online help for more information.

Click on Next.

WinTV-HVR-4000

To start the PowerCinema application double click on the CyberLink

PowerCinema Icon on your desktop or click on Start / All Programs /
CyberLink PowerCinema / PowerCinema.

7. CyberLink PowerCinema

N

ote: If you have any anti-virus software enabled, please dis-

able it during the installation of the software.

Start your computer, the Found
New Hardware Wizard will
appear, Click on Cancel.

5. Install the WinTV Windows driver

You will now need to check that
the drivers are installed correctly.
Right Click on My Computer and
Left Click on Properties.

Click on Hardware tab and then
Device Manager.
In the Device Manager click on
the + symbol on the Sound

Video and Game controllers sec­tion. If the driver is installed cor-

rectly you should see the
Hauppauge WinTV.

You will then be presented with a blue screen which will begin
installing and updating the drivers for your product.

If any of them have a yellow exclamation mark, follow this procedure:

1.Close Device Manager

2.On the Hauppauge Installation CD-ROM double click on the file
called HCWclear.exe and select the last 2 options and click on OK.

3. Once the black screen has closed down, re-start the computer and

continue from page 3 above or contact our technical support
department.

Page 5 Page 6 Page 7 Page 8

When the channel scan is com­plete click on Next to continue.

The DVB-S EPG allows you to
view now and next channel pro­gram information, refer to the
online help for more information.

PowerCinema detect the Radio
tuners.

There is one FM tuner on the
WinTV-HVR-4000, click Next to
continue.

Select the location where you
want to save the recorded files
and click Next.

You can now scan for FM radio
channels by clicking on the select
tuner to scan stations.

Once the Radio scan is complete
click on Next to continue.

You can search your computer
for available music files that will
be added to a play list by select­ing search now, click Next to con-
tinue.

The Setup Wizard is now fin­ished, complete the product reg­istration and click Next to termi­nate.

N

ote: CyberLink PowerCinema is a function-rich Media Center
software. You can use it for the playing of music, video,
DVD's and TV shows. Please refer the user manual, which

you find on the CD-ROM in electronic form.

The remote control software is installed automatically during the
installation of the WinTV applications.

You will see the WinTV Remote icon in the Device Tray. The installa­tion will add a shortcut to IR.EXE to the Startup group, so that IR.EXE
is loaded every time after Windows has booted.

If you need to restart the remote control, select Restart IR from the

Start \ All Program Files \ WinTV directory.

Please ensure the following before trying to use this option:

1.Infrared Remote control - Has batteries inserted

2.Infrared-Receiver, is fully connected to the IR socket of the WinTV-

Card

3.Infrared software is started - The IR icon is on the start bar
To start the PowerCinema press the GO button. Use the scroll up and

down button to select PowerCinema and press OK to select.

Button of the Remote control

Button Function
Go: Open PowerCinema
Power: Close PowerCinema
TV: Display TV Menu
Videos: Display Video Menu
Music: Display Music Menu
Pictures: Display Pictures Menu
Guide: Display EPG program guide

(If configured)

Radio: Display Radio menu
OK: Confirm selection
Back/Exit: Exit the Menu
Menu: No function
Vol: Volume up/down
Prev. Ch: Select the previous channel
Mute: Sound on/off
Ch: Select the next channel
REC: Start a recording
Stop: Stop a recording;

Exit pause mode

<<: Rewind
Play: Start playing
>>: Forward
Pause: Start Pause-Mode (Timeshift)
Skip: Skip ahead (x2/x 4/x8)
0-9: Channel number
text (*): Display teletext pages
Sub/CC: Display sub-titles (If available)
Color Keys:These keys related to the options available on the teletext

page that you have selected.

8. Installing the Remote Control software

To uninstall the Driver and Software

To uninstall the software simply run the hcwclear.exe off
theHauppauge installation CD-ROM and select the last 1 option and
the entry “search all INF files etc”. If you now select “OK” a black
screen will briefly appear and once it has disappeared the software
will be removed. If you now re-start the computer you will be at Step
5 on page 2 of this document and can now re-install the software.

“Error code 10” during installation

This is caused by a failure to load the WinTV drivers. Uninstall the
software (as above) and then follow the instructions from step 5. If
this still gives you an error message move the WinTV to a different
PCI slot and re-install the drivers again.

9. Troubleshooting

Radio Interference Statement:

The WinTV boards have been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equip­ment generates, uses, and can radiate radio frequency energy and
cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installa­tion. If this equipment does cause harmful interference to radio or tel­evision reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:

● reorient or relocate the receiving antenna.

● increase the separation between the equipment and receiver.

● connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

● consult the dealer or an experienced radio/TV technician for help.

FCC ID: H90WINTV
CAUTION: Changes or modifications not expressly approved by the

party responsible for compliance to the FCC Rules could void the
user's authority to operate the equipment.

CE Statement: This equipment has been tested and complies with
EN 55013, EN 55020 and IEC 801-3 part 3 standards.

FCC Statement

The device may not be disposed of with household rubbish. This
appliance is labeled in accordance with European Directive
2002/96/EG concerning used electrical and electronic appliances
(Waste Electrical and Electronic Equipment - WEEE). The guideline
determines the framework for the return and recycling of used appli­ances as applicable throughout the EU. To return your used device,
please use the return and collection systems available to you.

Waste Electrical and Electronic Equipment
(WEEE)

Select the number of satellites
that you are using. In most situa­tions in the UK there will only be
1 satellite position, as your satel­lite dish will only have 1 LNB.

Click Next.

Select the satellite that your dish
is pointing to from the satellite
list. In the UK the 2 most com­mon satellite positions are:

ASTRA 2A-B-D, Eurobird 1(E28)
and ASTRA 1C, 1E, 1F, 1G, 1H,
1KR, 2C (E19)

For a SKY satellite dish position
select ASTRA 2A-B-D, Eurobird 1
and select Next.

Only some channels are found during DVB-T channel scan

Ensure that your antenna is capable of receiving Digital terrestrial
transmission (Most rooftop/loft antenna under 8 years old may work).
You can enter your postcode at this website address:
www.dtg.org.uk/retailer/coverage.html as this will show you what
services are available in your area.
You can then enter your postcode at this website:
www.bbc.co.uk/reception/transmitters/today.shtml to see if there is
any engineering work being carried out on your transmitter as this
could affect the reception of some channels.

Only some channels are found during the DVB-S / S2 channel scan

Please ensure that your satellite dish is aligned correctly and then
start the PowerCinema application and go to:

Settings / TV / Signal Settings / Manage Channels / Add New Channel

You can now enter the satellite and channel information for station
that is missing.

If you do not know this information then visit Http://www.lyngsat.com
and select the location (e.g. Europe), where you can find the satellite
information that will be used for the channel scan, for example:

BBC HD is on Europe / Astra 28.2 East (2A/2B/2D)
Transponder freq = 10847
Symbol rate = 22000
Polarization = Verticle
FEC Rate = 5 / 6
Modulation = QPSK
Pilot = On
Roll-Off = 0.35

N

ote: If you are searching for a DVB-S2 channel the

Modulation = 8PSK

Digital DVB-S / DVB-S2 TV Setup

Select Scan channels.