Hauppage WinTV-HVR-4000 Quick Installation Guide for Windows XP

Page 1 Page 2 Page 3 Page 4

WinTV-HVR-4000

Quick Installation Guide for Windows XP

© 2006 Hauppauge Computer Works · QI-WNTV-HVR4000CYBER-V1.0-ENG · 2006/10/26

● WinTV-HVR-4000 - PCI-board

● Remote control transmitter with

2 AAA batteries

● Remote control receiver

with velcro dot fastener

● FM Radio antenna

● S-Video/Composite Adapter

● Installation CD-ROM with:

· CyberLink PowerCinema 4.7

1. Contents of the WinTV-HVR-package

Hauppauge Computer Works, Ltd.

10 Borough High Street
Bank Chambers
London, UK, SE1 9QQ
www.hauppauge.co.uk

Tech Support: ([phone]
Telephone: [phone]
Fax: [phone]

Hauppauge Computer Works, Inc.

91 Cabot Court
Hauppauge, NY 11788
www.hauppauge.com

Tech Support: ([phone]
Telephone: [phone]
Fax: [phone]

Hauppauge Digital Asia, Pte. Ltd.

Blk 1093, Lower Delta Road #04-05
Tiong Bahru Industrial Estate
Singapore 169204
www.hauppauge.com.sg

Tech Support: ([phone]
Telephone: [phone]
Fax: [phone]

To install, switch off the computer and remove the computer cover.
The manufacturer of your PC supplies instructions on removing the PC
cover.

N

ote: Your PC could be damaged by electrostatic discharge.
Avoid this by contacting the earthed chassis of your PC,
before you open it or touch the PCI card.

● Locate a free PCI slot (a short white slot). Unscrew and remove the

meta cover plate which covers the back of the empty slot.

● Plug the WinTV-HVR board into the PCI slot, and screw the WinTV-

HVR metal cover plate to the PC.

2. Installing the WinTV-HVR board

With the HVR you can watch and record analog TV, DVB-Terrestrial and
DVB-Satellite channels. You can also connect sources via the compos­ite and S-Video inputs and listen to FM Radio as well.

You can now connect the leads provided to the WinTV-HVR-4000 in
the following order.

FM FM Radio-Antenna
TV TV-Antenna
SAT SAT-Cable from the LNB of your satellite dish
S-VIDEO IN S-Video-Input *
LINE IN Stereo-Audio-Input, from the output of your source
IR Input for the Infra-red-Sensor

N

ote: for using a RCA Yellow Phono composite input you
must use the supplied S-Video to composite adapter.

3. Connections of the WinTV-HVR-4000 board

DVB-T

Please ensure that you have a suitable TV aerial connected to the
WinTV card. You should then ensure you are located in a area that
supports Digital Terrestrial TV by visiting:
www.dtg.org.uk/retailer/coverage.html and entering your post code.

If your area does have digital Terrestrial TV coverage, please check
your TV antenna as most antenna’s that are over 8 years old may not
support the Digital Terrestrial TV broadcasts and you may need to
update yours to a ‘Wideband or Highgain’ antenna.

DVB-S

Please ensure that your satellite dish is correctly aligned and the Sat
cable is connectly directly from the LNB and not via a set top box.

4. WinTV-HVR-4000 DVB reception advice

You can check to see if the driver has been installed correctly. Click on

Start / Settings / Control Panel / System / Hardware / Device
Manager.

If you then click on the Sound
Video and Game Controllers sec-

tion you should see the eight
WinTV-HVR components.

If any of them have a yellow
exclamation mark, follow this pro­cedure:

1.Close Device Manager

2.On the Hauppauge Installation

CD-ROM double click on the file
called ”HcwDriverInstall”. The
windows “Searching for hard­ware and updating drivers…”
appears. Click on the bar to exit
and re-start the computer

3.Check again to see if the driver

has been installed correctly. If not, please contact our tech support.

N

ote: You may need to disable your antivirus programs during
the installation only.

5. Install the WinTV-HVR Windows XP driver

Start your PC. When it is com­pletely booted, the Add New
Hardware Wizard will appear.
Insert the Hauppauge Installation
CD-ROM into your CD-ROM
drive. Click Next.

Select Search for the best driver
for your device (Recommended).
Click Next.

N

ote: If you see a
Hardware Installation

box that mentions that
the driver is not digitally
signed, click the “Continue
Anyway” button to continue
the installation.

Once the driver components are
installed, click the Finish button.

To start the software installation, click Start / Run then type your CD-
ROM drive letter (for example: D:\) and then Setup.exe.

6. CyberLink Software Installation

Click Next.and follow the on
screen instructions to install the
software.

Once the installation is complete,
please re-start your computer.

Select the type of speaker setup
that you are using and click Next.

To start the PowerCinema application double click on the CyberLink
PowerCinema Icon on your desktop or click on Start / All Programs /
CyberLink PowerCinema / PowerCinema.

The WinTV-HVR-4000 has a
Hybrid tuner and can be config­ured for all 4 types of signals:
Analogue (Cable TV), DVB-T, DVB­S / HD DVB-S2.

You need to ensure that you have
connected the cables correctly
before performing a channel
scan.

This section will explain how to
scan in analog, digital DVB-T and
digital DVB-S.

You can configure a signal input
by selecting Settings / TV / Signal
settings.

The Setup Wizard will appear
which will guide you through the
setup and configuration of the
application, click Next.

Select the type of screen that you
are using (4:3 is normal TV /
Monitor screen size and 16:9 is a
widescreen TV / Monitor) and
click Next.

7. CyberLink PowerCinema

Analog TV Setup

Select if you are using a Cable or
Antenna signal and click Next.

Select the region that you are
located in and click Next.

Click on Autoscan for TV
Channels Now to start searching
for TV channels. During the chan­nel scan the TV pictures will brei­fly appear.

Once the channel scan is finished
click on Complete.

Digital DVB-T Setup
Select Digital (DVBT) and click

Next.

Select the region that you are
located in and click Next.

Click on Autoscan for TV
Channels Now to start searching
for TV channels. During the chan­nel scan the TV pictures will brei­fly appear.

Once the channel scan is finished
click on Complete.

Digital DVB-S/DVB-S2 TV Setup
Select Digital (DVBS) and click

Next.

Page 5 Page 6 Page 7 Page 8

Select the region that you are
located in and click Next.

Select the numer of satellites that
you are using. In most situations
there will only be 1 satellite posi­tion, as your satellite dish will
only have 1 LNB.

Select the satellite that your dish
is pointing to from the satellite
list. In the United Kingdom the 2
most common satellite positions
are:

Astra 2A, 2B, 2D (E28)
Astra 1C, 1E, 1F, 1G, 1H, 2C (E19)

For a SKY satellite dish position
select the Astra 2A, 2B, 2D

(E28) and select Next.

Click on Autoscan for TV
Channels Now to start searching
for TV channels. During the chan­nel scan the TV pictures will
briefly appear.

Once the channel scan is finished
click on Complete.

Electronic Program Guide

The EPG shows you what’s on TV
for up to 2 weeks in advance.
You can use the EPG to shedule
recordings while you are not sit­ting at the PC.

Click on more information about
EPG.

There are 2 options for recieving
the EPG data:

Using a pay service epgData.com
Using a free service NexTView
Select the NexTView option and

click Next.

Select the folder on your comput­er where the TV recordings will
be stored.

When the searching is finished
click on Complete.

The setup wizard is now com­plete, click Next to finish.

You can search for FM Radio sta­tions.

When the scanning is finished
click on Complete.

Select the folder on your comput­er where the FM Radio recordings
will be stored.

You can search for music that is
already stored on your computer
which will add it to a play list.

The remote control software is installed automatically during the
installation of the WinTV applications.

You will see the WinTV Remote icon in the Device Tray. The installa­tion will add a shortcut to IR.EXE to the Startup group, so that IR.EXE
is loaded every time after Windows has booted.

If you need to restart the remote control, select Restart IR from the

Start \ All Program Files \ WinTV directory.

Please ensure the following before trying to use this option:

1.Infrared Remote control - Has batteries inserted

2.Infrared-Receiver, is fully connected to the IR socket of the WinTV-Card

3.Infrared software is started - The IR icon is on the start bar

To start the PowerCinema press the GO button. Use the scroll up and
down button to select PowerCinema and press OK to select.

Button of the Remote control

Button Function
Go: Open PowerCinema
Power: Close PowerCinema
TV: Display TV Menu
Videos: Display Video Menu
Music: Display Music Menu
Pictures: Display Pictures Menu
Guide: Display EPG program guide

(If configured)

Radio: Display Radio menu
OK: Confirm selection
Back/Exit: Exit the Menu
Menu: No function
Vol: Volume up/down
Prev. Ch: Select the previous channel
Mute: Sound on/off
Ch: Select the next channel
REC: Start a recording
Stop: Stop a recording;

Exit pause mode

<<: Rewind
Play: Start playing
>>: Forward
Pause: Start Pause-Mode (Timeshift)
Skip: Skip ahead (x2/x 4/x8)
0-9: Channel number
text (*): Display teletext pages
Sub/CC: Display sub-titles (If available)
Color Keys:These keys related to the options available on the teletext

page that you have selected.

8. Installing the Remote Control software

To uninstall the Driver and Software

To uninstall the software simply run the hcwclear.exe off
theHauppauge installation CD-ROM and select the last 1 option and
the entry “search all INF files etc”. If you now select “OK” a black
screen will briefly appear and once it has disappeared the software
will be removed. If you now re-start the computer you will be at Step
5 on page 2 of this document and can now re-install the software.

“Error code 10” during installation

This is caused by a failure to load the WinTV-HVR-4000 drivers.
Uninstall the software (as above) and then follow the instructions from
page 3. If this still gives you an error message move the WinTV-HVR­4000 to a different PCI slot and re-install the drivers again.

Only some channels are found during DVB-T channel scan

Ensure that your antenna is capable of receiving Digital terrestrial
transmission (Most rooftop/loft antenna under 8 years old may work).
You can enter your postcode at this website address:
www.dtg.org.uk/retailer/coverage.html as this will show you what
services are available in your area.
You can then enter your postcode at this website:
www.bbc.co.uk/reception/transmitters/today.shtml to see if there is
any engineering work being carried out on your transmitter as this
could affect the reception of some channels.

9. Troubleshooting

Radio Interference Statement:

The WinTV boards have been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gener­ates, uses, and can radiate radio frequency energy and cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equip­ment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of
the following measures:

● reorient or relocate the receiving antenna.

● increase the separation between the equipment and receiver.

● connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

● consult the dealer or an experienced radio/TV technician for help.

FCC ID: H90WINTV
CAUTION: Changes or modifications not expressly approved by the

party responsible for compliance to the FCC Rules could void the
user's authority to operate the equipment.

CE Statement: This equipment has been tested and complies with EN
55013, EN 55020 and IEC 801-3 part 3 standards.

FCC Statement

The device may not be disposed of with household rubbish. This
appliance is labeled in accordance with European Directive
2002/96/EG concerning used electrical and electronic appliances
(Waste Electrical and Electronic Equipment - WEEE). The guideline
determines the framework for the return and recycling of used appli­ances as applicable throughout the EU. To return your used device,
please use the return and collection systems available to you.

Waste Electrical and Electronic Equipment
(WEEE)

N

ote: CyberLink PowerCinema is a function-rich Media center
software. You can use it for the playing of music, video,
DVD's and TV shows. Please refer the user manual, which

you find on the CD-ROM in electronic form.