Hatz Diesel 1D90V, 1D90W Operator's Manual
CRE ATI NG POW ER SOL UTI ONS .
INCLUDES SUPPLEMENTAL INFORMATION TO
THE OWNER’S MANUAL FOR MODEL YEAR 2016
EPA CERTIFIED NONROAD COMPRESSION-IGNITION ENGINES.
INCLUDES SUPPLEMENTAL INFORMATION FOR
THE USE OF EPA CERTIFIED ENGINES WITHIN
CALIFORNIA.
1D90V | 1D90W
OPERATOR’S MANUAL
Diesel engine
Hatz Diesel
www.HATZ-DIESEL.com
1D90V, 1D90W Table of contents
Table of contents
1 Notices .................................................................................................................5
2 General information ............................................................................................ 6
3 Safety ................................................................................................................... 7
3.1 General information............................................................................................... 7
3.1.1 Intended use and foreseeable misuse .................................................................. 7
3.1.2 Machine user or machine manufacturer obligations ............................................. 8
3.1.3 Representation of safety notes ............................................................................. 9
3.1.4 Meaning of safety symbols.................................................................................. 10
3.2 Safety notes ........................................................................................................ 12
3.2.1 Operational safety ............................................................................................... 12
3.2.2 Machine-specific safety instructions for operation .............................................. 15
3.2.3 Machine-specific safety instructions for maintenance work ................................ 16
3.2.4 Electrical equipment............................................................................................ 18
3.3 Labels.................................................................................................................. 19
4 Technical data ................................................................................................... 21
4.1 Engine information and filling quantities.............................................................. 21
4.2 Engine type plate ................................................................................................ 22
4.2.1 Engine serial number .......................................................................................... 23
4.3 Physical operating conditions.............................................................................. 24
4.4 Engine oil ............................................................................................................ 24
4.5 Fuel .....................................................................................................................26
5 Engine design.................................................................................................... 27
6 Transport, assembly and commissioning ...................................................... 28
6.1 Transport............................................................................................................. 28
6.2 Installation notes ................................................................................................. 29
6.3 Preparations for commissioning.......................................................................... 30
6.4 Filling engine oil (first filling) ................................................................................ 30
7 Operation and use............................................................................................. 32
7.1 Safety notes ........................................................................................................ 32
7.2 Performing tests .................................................................................................. 33
7.3 Start preparation ................................................................................................. 33
7.3.1 Activating the mechanical oil pressure shut down device (option):..................... 34
7.3.2 Setting the speed control .................................................................................... 35
7.4 Starting the engine .............................................................................................. 36
7.5 Switching off the engine ...................................................................................... 41
7.5.1 Switching off the engine (mechanical) ................................................................ 41
7.5.2 Switching off the engine (electrical) .................................................................... 43
7.6 Checking the oil level and adding oil if necessary............................................... 44
7.7 Refueling ............................................................................................................. 46
7.8 Checking the water separator ............................................................................. 47
HATZ
3Operator’s Manual
Table of contents 1D90V, 1D90W
7.9 Check the air filter warning indicator (option)...................................................... 49
8 Maintenance ...................................................................................................... 50
8.1 General maintenance instructions....................................................................... 50
8.2 Maintenance work ............................................................................................... 51
8.2.1 Maintenance notice label .................................................................................... 51
8.2.2 Maintenance plan................................................................................................ 52
8.2.3 Check the intake area of the combustion air....................................................... 54
8.2.4 Checking the cooling air area.............................................................................. 55
8.2.5 Changing the engine oil and oil filter ................................................................... 56
8.2.6 Checking and setting the tappet clearance ......................................................... 60
8.2.7 Cleaning the cooling air area .............................................................................. 62
8.2.8 Checking the screw connections......................................................................... 63
8.2.9 Changing the fuel filter ........................................................................................ 63
8.2.10 Maintaining the dry air filter ................................................................................. 66
8.2.11 Checking and cleaning the air filter cartridge ...................................................... 67
9 Faults.................................................................................................................. 69
9.1 Trouble shooting ................................................................................................. 69
10 Storage and disposal........................................................................................ 75
10.1 Storing the machine ............................................................................................ 75
10.2 Disposing of the machine.................................................................................... 77
11 Installation declaration ..................................................................................... 78
12 EPA CERTIFIED ENGINES................................................................................ 79
13 EPA CERTIFIED ENGINES WITHIN CALIFORNIA........................................... 87
4
Operator’s Manual
HATZ
1D90V, 1D90W Notices
1 Notices
Contact data
© 2016
Motorenfabrik HATZ
Ernst-Hatz-Straße 16
94099 Ruhstorf
Germany
Tel. +49 (0)8531 319-0
Fax +49 (0)8531 319-418
marketing@hatz-diesel.de
www.hatz-diesel.com
All rights reserved!
Copyright
The copyright for this Operator's Manual rests entirely with Motorenfabrik
HATZ, Ruhstorf.
This Operator's Manual may only be copied or distributed if written approval
has been received. This also applies to the copying or distribution of excerpts of the Operator's Manual. The same conditions apply to distribution of
the Operator's Manual to third parties in digital form.
Original Operator's Manual
This Operator's Manual was translated into multiple languages.
The German version is the original Operator's Manual. All other language
versions are translations of the original Operator's Manual.
HATZ
5Operator’s Manual
General information 1D90V, 1D90W
2 General information
Information on the document
This Operator's Manual was created with due care. It is exclusively intended
to offer a technical description of the machine and to provide instructions on
commissioning, operating and maintaining the machine. When operating the
machine, the applicable standards and legal regulations as well as any inhouse regulations apply.
Before commissioning, during operation and before maintenance work is begun on the machine, read the Operator's Manual carefully and keep it close
by for ready access.
Machine
This Operator's Manual describes the following machine.
Machine name HATZ diesel engine
Type number 1D90V, 1D90W
Customer service
Have service work performed by qualified technicians only. We recommend
that you work with one of the over 500 HATZ service stations. Trained specialists there will repair your machine with Hatz original spare parts and
with HATZ tools. The global HATZ service network is at your disposal to advise you and supply you with spare parts. For the address of the Hatz ser-
vice station nearest you, please see the directory included or visit the internet at: www.hatz-diesel.com
Problems may occur if unsuitable spare parts have been installed. We cannot accept responsibility for damage and secondary damage that result from
this.
We therefore recommend the use of genuine Hatz original spare parts.
These parts are manufactured according to strict Hatz specifications and
achieve maximum operational reliability through their perfect fit and functionality. The order number can be found in the enclosed spare parts list or on
the internet at: www.hatz-diesel.com
Exclusion of liability
The manufacturer cannot be held responsible for personal injury, damage to
property, or damage to the machine itself caused by improper use, foreseeable misuse, or failure to follow or adequately follow the safety measures
and procedures described in this Operators Manual. This also applies to
changes made to the machine and the use of unsuitable spare parts.
Modifications, which serve technical improvement, are reserved.
6
Operator’s Manual
HATZ
1D90V, 1D90W Safety
3 Safety
3.1 General information
Introduction
This chapter contains the information you need to work safely with this machine.
To prevent accidents and damage to the machine, it is imperative that these
safety instructions be followed.
Read this chapter carefully before beginning work.
3.1.1 Intended use and foreseeable misuse
Intended use
The machine described in this Operator's Manual fulfills the following functions:
▪ Diesel engine intended for installation in a machine or for assembly with
other machines to form a machine. See the chapter 11 Installation decla-
ration, page 78.
This engine is intended exclusively for the purpose specified and tested by
the manufacturer of the machine into which the engine is installed.
Any other use is not intended and therefore not permitted. Violations compromise the safety of the personnel working with the machine. Responsibility
is not accepted by Motorenfabrik HATZ for damage resulting from this situation.
The operational safety of the machine is only guaranteed if it is used as intended.
The intended use also includes observance of the instructions in this Operator's Manual to preserve the environment, including in the appendix for the
model year 2016 as per EPA Nonroad Diesel Engines.
HATZ
Foreseeable misuse
The following is considered to be foreseeable misuse:
▪ Any use that varies from or extends beyond the uses specified above.
▪ Failure to comply with the instructions in this Operator's Manual.
▪ Failure to comply with the safety instructions.
▪ Failure to immediately eliminate malfunctions that impact safety before
continuing work with the machine (working with the machine when it is not
in perfect condition, either functionally or in terms of safety).
▪ Failure to perform the necessary inspection and maintenance work.
▪ Any unauthorized modification of or removal of safety equipment.
▪ Use of spare parts and accessories that are unsuitable or have not been
approved by HATZ.
7Operator’s Manual
Safety 1D90V, 1D90W
▪ Operation in flammable or hazardous environments.
▪ Operation in closed-off or poorly ventilated rooms.
▪ Installation of the machine in moving equipment (e.g. vehicles, trailers) or
in closed rooms without additional measures to handle supply air, extract
air, and exhaust gas.
▪ Improper operation at variance with DIN 6271 and DIN ISO 8528 (climate,
load, safety).
Residual risks
Residual risks result during daily use and in association with maintenance
work.
These residual risks will be pointed out in chapter 3.2.2 Machine-specific
safety instructions for operation, page 15 and in chapter 3.2.3 Machinespecific safety instructions for maintenance work, page 16 as well as in the
further contents of the manual, directly in front of the descriptions or operating instructions concerned.
3.1.2 Machine user or machine manufacturer obligations
Machine manufacturer obligations
If you have an engine that is not yet installed in a machine, it is imperative
that you follow the Assembly Instructions for HATZ Diesel Engines before installing the engine. These assembly instructions contain important information on how to safely install the engine and are available at your nearest HATZ service station.
It is prohibited to start the engine before it is fully installed.
In addition, please note that it is prohibited to start up the machine before it
has been determined that the machine into which this engine is installed fulfills all safety-related requirements and legal regulations.
User obligations
The user is obliged to operate the machine when it is in perfect condition
only. The user must check the condition of the machine before use and ensure that any defects are eliminated before it is taken into service. Running
the machine while identified defects exist is not permitted. The user must
also ensure that all persons who work on the machine are familiar with the
contents of this Operators Manual.
8
Operator’s Manual
HATZ
1D90V, 1D90W Safety
Obligations of the operating and maintenance personnel
Personnel assigned with operating and maintaining the machine must have
read and understood the Operator's Manual or must possess the qualifications necessary for working with this equipment, acquired in training/instructional courses. No one may work with the machine without the necessary
qualifications, even if for just a brief period.
The operating personnel must not be under the influence of drugs, medication or alcohol.
All work performed on the machine must be in compliance with the information provided in the Operator's Manual.
Storing the Operator's Manual
This Operator's Manual is an integral component of the machine (also when
being sold). It must be stored in the direct vicinity of the machine and be accessible to personnel at all times.
3.1.3 Representation of safety notes
Overview
This machine has been designed and built according to state-of-the-art technology and the recognized safety standards. Despite these precautions,
risks exist when operating the machine and during maintenance work.
These risks are identified in this manual by means of safety notes.
The safety notes precede the related description or operating step.
HATZ
Structure of the safety notes
The safety notes consist of:
▪ Danger symbol
▪ signal word
▪ Description of danger
▪ Possible consequences
▪ Preventative measures
General danger symbol
The general danger symbol is used to identify the danger of personal injury.
9Operator’s Manual
Safety 1D90V, 1D90W
DANGER
WARNING
CAUTION
CAUTION
NOTICE
Signal words
Signal words identify the magnitude of the risk and the seriousness of the
possible injuries:
Danger symbol/
signal word
3.1.4 Meaning of safety symbols
Explanation of symbols
The following table describes the meanings of the safety symbols used in
this Operator's Manual.
Symbol Meaning
Smoking, fire, and open flames are prohibited!
Meaning
This signal word is used to indicate imminently
dangerous situations which, if not avoided, will
lead to serious injury or death.
This signal word is used to indicate potentially
dangerous situations which, if not avoided, may
lead to serious injury or death.
This signal word is used to indicate potentially
dangerous situations which, if not avoided, may
lead to minor or moderate injury.
This signal word, without a danger symbol, is
used to indicate the risk of property damage.
This signal word indicates additional useful information, such as operating tips and cross references.
10
Warning of personal injury!
Warning of hot surfaces!
Warning of flammable substances!
Operator’s Manual
HATZ
1D90V, 1D90W Safety
i
Symbol Meaning
Warning of explosive substances!
Warning of toxic engine exhaust!
Warning of corrosive substances!
Warning of heavy loads!
Warning of environmental damage!
Comply with the Operator's Manual or additional documentation from other manufacturers or the user!
HATZ
Additional information that is useful to the reader.
11Operator’s Manual
Safety 1D90V, 1D90W
3.2 Safety notes
3.2.1 Operational safety
Introduction
This chapter contains all of the important safety instructions for personal protection and for safe and reliable operation. Additional, task-related safety instructions can be found at the beginning of each chapter.
DANGER
Danger to life, danger of injury or danger of property damage due to failure to comply with the Operator's Manual and
the safety instructions contained therein.
▪ As the user of the machine, you must ensure that all people
working on the machine are familiar with the content of this
Operator's Manual.
▪ Before working on the machine, read this Operator's Manual
carefully, paying special attention to the safety notes.
▪ Fulfill all required safety conditions before working on the
machine.
▪ Follow all general safety instructions as well as the specific
task-related safety instructions contained in the individual
chapters.
12
Using the machine
▪ Only operate the machine for the purposes described in chapter 3.1.1 In-
tended use and foreseeable misuse, page 7.
Compliance with other regulations
▪ Adhere to the applicable accident prevention regulations of the trade asso-
ciations.
▪ Comply with the regulations concerning the minimum safety and health re-
quirements for the use of work equipment by workers at work.
▪ In addition, local safety, accident prevention and environmental regula-
tions also apply when operating the machine.
Personal protective equipment
During operation and maintenance of the machine, personal protective
equipment must be available and must be used if necessary. The required
personal protective equipment is specified in the descriptions of the operating steps.
Operator’s Manual
HATZ
1D90V, 1D90W Safety
Personal protective
Pictogram Function
equipment
Safety shoes Safety shoes offer protection
against:
▪ Slipping
▪ Falling objects
Hearing protection Hearing protection offers protec-
tion against ear injuries due to
excessive and constant noise.
Safety gloves Safety gloves protect the hands
against injury, e.g. from battery
acid.
Safety goggles
(with side protection)
Safety goggles protect the eyes
from flying objects (e.g. dust
particles, spraying liquids, spraying acid).
Working clothes Wear close-fitting clothing. How-
ever, it must not restrict the
wearer's freedom of movement.
Warning labels and information signs on the machine
The warning labels and information signs on the machine must be followed
(see chapter "Labels" 3.3 Labels, page 19).
The warning labels and information signs must be kept legible and must be
replaced if necessary. For this purpose, contact your nearest HATZ service
station.
HATZ
Maintenance work
Maintenance work that goes beyond the scope described in this manual
must only be performed by qualified technicians (see chapter 2 General in-
formation, page 6).
Independent maintenance work and constructional changes to the machine,
especially to the safety equipment, are not permitted.
Safety equipment
Safety equipment must not be modified and must not be rendered ineffective
during normal operation.
13Operator’s Manual
Safety 1D90V, 1D90W
General safety instructions
DANGER
Danger to life and danger of injury due to failure to follow
the warnings on the machine and in the Operator's Manual.
▪ Heed the warnings on the machine and in the Operator's
Manual.
WARNING
Danger of injury and danger of incorrect operation due to
inadequate personnel qualifications.
▪ The personnel must have read and understood this Opera-
tor's Manual or must possess the qualifications necessary
for working with this equipment, acquired in training/instructional courses.
▪ Only qualified personnel is permitted to operate and main-
tain this machine.
▪ Failure to comply will cause the warranty to be void.
WARNING
14
Danger of injury from failure to follow the operating instructions and from performing unauthorized tasks on the machine.
▪ Follow all instructions.
▪ Do not perform activities for which no qualification is avail-
able. Contact properly trained personnel if necessary.
CAUTION
Danger of injury from overloading the body.
Lifting the machine to transport it or to move it to another location can lead to injuries (of the back, for example).
▪ Only lift the machine with a hoist (see chapter 6.1 Transport,
page 28).
Operator’s Manual
HATZ
1D90V, 1D90W Safety
3.2.2 Machine-specific safety instructions for operation
Introduction
The machine can pose residual risks during operation. To eliminate these
risks, all persons working on the machine must follow the general and machine-specific safety instructions.
If you have an engine that is not yet installed in a machine, it is imperative
that you follow the Assembly Instructions for HATZ Diesel Engines before installing the engine.
These assembly instructions contain important information on safe installation.
If the engine is installed in a machine or assembled with other machines to
form a machine, it is prohibited to start the engine before it has been determined that the newly created machine fulfills all safety-related requirements
and applicable legal regulations.
Safe operation
▪ Before switching on the machine, ensure that no one can be injured when
the machine is started up.
▪ During machine operation, ensure that unauthorized persons do not have
access to the area in which the machine has an impact.
▪ Parts of the exhaust gas system and the surface of the engine become hot
during operation. Risk of injury from touching hot parts! Let the engine cool
before maintenance.
▪ Do not refuel during operation.
HATZ
Faults
▪ Immediately eliminate faults that compromise safety.
▪ Switch off the machine and do not take into service again until all faults
have been eliminated.
Safety instructions for operation
DANGER
Danger to life from inhaling exhaust gases.
Toxic engine exhaust gases can lead to loss of consciousness
and even death in closed-off and poorly ventilated rooms.
▪ Never operate the machine in closed-off or poorly ventilated
rooms.
▪ Do not breathe in the exhaust gases.
15Operator’s Manual
Safety 1D90V, 1D90W
DANGER
Fire hazard from fuel.
Leaked or spilled fuel can ignite on hot engine parts and cause
serious burn injuries.
▪ Only refuel when the engine is switched off.
▪ Never refuel in the vicinity of open flames or sparks that can
cause ignition.
▪ Do not smoke.
▪ Do not spill fuel.
3.2.3 Machine-specific safety instructions for maintenance work
Introduction
The machine can pose residual risks during maintenance. To eliminate
these risks, all persons working on the machine must follow the general and
machine-specific safety instructions.
Maintenance intervals
▪ Strictly adhere to the maintenance intervals.
Regular maintenance according to the instructions in this Operator's Manual is essential for ensuring reliable operation and the correct engine exhaust quality.
▪ Check the safety equipment regularly to ensure it is in good condition and
functioning properly.
▪ Check connections, cables and fasteners regularly to ensure they are in
good condition.
16
Maintenance work
Maintenance work that goes beyond the scope described in this manual
must only be performed by qualified technicians. We recommend that you
work with one of the over 500 HATZ service stations.
Replacing parts
▪ When replacing defective components, we recommend that you use gen-
uine HATZ original spare parts (see chapter 2 General information, page
6).
▪ When disposing of parts that can no longer be used, do so in accordance
with local environmental regulations or send them to a recycling center.
Measures following maintenance and troubleshooting
▪ Securely reconnect loose electrical connections; check that the electrical
components and equipment are functioning properly.
▪ Check the entire machine for foreign bodies; remove any foreign bodies.
Operator’s Manual
HATZ
1D90V, 1D90W Safety
Safety instructions for maintenance work
DANGER
Danger of explosion from flammable cleaning agents.
Cleaning with benzene is an explosion hazard. It is highly
flammable, can become electrostatically charged, and can generate an explosive gas/air mixture.
▪ Use halogen-free, cold cleaners with a high flashpoint for
cleaning.
▪ Comply with manufacturer's instructions.
WARNING
Danger of injury from compressed air and dust particles.
Eye injuries may occur when cleaning with compressed air.
▪ Wear safety goggles.
CAUTION
HATZ
Danger of injury if maintenance instructions are not followed.
▪ Only perform maintenance when the engine is switched off.
▪ Protect start-up devices (crank handle, recoil start or start-
ing key) from unauthorized access.
▪ For engines with a starter: Disconnect the negative battery
terminal.
▪ When the maintenance work has been completed, ensure
that all tools are removed from the machine.
CAUTION
Danger of burns.
There is a danger of burns when working on a hot engine.
▪ Let the engine cool before maintenance.
17Operator’s Manual
Safety 1D90V, 1D90W
3.2.4 Electrical equipment
Safety notes
DANGER
Danger to life, danger of injury or danger of property damage due to incorrect use of batteries.
▪ Do not place tools on the battery.
▪ Before performing work on the electrical equipment, always
disconnect the negative battery terminal.
▪ Never swap the positive (+) and negative (–) battery termi-
nals.
▪ When installing the battery, first connect the positive cable
and then the negative cable.
▪ When removing the battery, first disconnect the negative
cable and then the positive cable.
▪ It is imperative that you prevent short circuits and mass con-
tact of current-carrying cables.
▪ If faults occur, check the cable connections for good con-
tact.
DANGER
18
Danger of explosion from flammable substances.
There is a danger of explosion from flammable gases.
▪ Keep batteries away from open flames and incendiary
sparks.
▪ Do not smoke when working with batteries.
CAUTION
Danger of chemical burns
Chemical burns can occur when using batteries for the electrical
operation.
▪ Protect your eyes, skin, and clothing from corrosive battery
acid.
▪ Immediately rinse areas affected by splashed acid with clear
water and consult a physician if necessary.
Operator’s Manual
HATZ
1D90V, 1D90W Safety
= 1h
1D41:
1D42:
1D50:
1D81:
1D90:
IN 0.1 mm
IN 0.1 mm
IN 0.1 mm
IN 0.1 mm
IN 0.3 mm
/
/
/
/
/
EX 0.2 mm
EX 0.2 mm
EX 0.2 mm
EX 0.2 mm
EX 0.3 mm
1D..
500h
250h
IN
EX
max
OIL
DIESEL
H O
2
max
0000 053 657 02
NOTICE
▪ The necessary wiring diagrams are included with the ma-
chine if it is equipped with electrical equipment. Additional
wiring diagrams can be requested when needed.
▪ We cannot be held liable for electrical equipment that is not
designed according to HATZ wiring diagrams.
▪ Promptly replace faulty indicator lamps.
▪ Do not pull out the starting key during operation.
▪ Do not disconnect the battery while the machine is running. Resulting volt-
age peaks could destroy the electronic components.
▪ When cleaning, do no spray the electrical equipment components with a
water jet or high pressure cleaner.
▪ When performing welding work on the machine, disconnect the battery
and place the ground clamp of the welding equipment as close as possible
to the welding area. Disconnect the plug-in connections to the voltage regulator.
3.3 Labels
Warning labels and information signs on the engine
Label Meaning
Maintenance instructions (see chapter 8.1 General maintenance instruc-
tions, page 50)
HATZ
Refuel with diesel fuel only. For the
specification, see chapter 4.5 Fuel,
page 26
Do not use bio diesel.
The engine may only be operated
with fuel that is "EXTREMELY LOW
IN SULFUR OR SULFUR-FREE".
The fuel label is located close to the
fuel cap. If there is no fuel tank installed on the engine, the label must
be applied permanently close to the
fuel filler opening.
19Operator’s Manual
Safety 1D90V, 1D90W
0000 051 268 02
1 3 4
5
6
2
7
15s
Label Meaning
Mechanical oil pressure shut down
device (option):
1.Engine has switched off automatically.
2.Fill with fuel.
3.Make sure the engine is horizontal.
4.Check the oil level.
5.Top up engine oil if required.
6.Press manual lever for approx. 15
seconds.
For engines with a fuel feed pump,
simultaneously actuate the manual
lever on the fuel feed pump several times.
7.Start the engine.
For more information, see chapter
7.3.1 Activating the mechanical oil
pressure shut down device (option):,
page 34.
20
Operator’s Manual
HATZ
1D90V, 1D90W Technical data
4 Technical data
4.1 Engine information and filling quantities
Type 1D90
Model V, W
Type Air cooled, four stroke diesel engine
Combustion system Direct injection
Number of cylinders 1
Bore/stroke mm 104 / 85
Displacement cm
Engine oil capacity Approx.
Difference between the
"max." and "min."
marks
Engine oil consumption
(after running-in period)
Engine oil pressure at oil
temperature of 80 120°C
Sense of rotation When viewing flywheel: left
Tappet clearance
at 10 - 30°C
inlet/outlet 0.30
Permissible inclination Max. 25°
Weight
Model V
Model W
Battery capacity Min/max 12V – 45/88Ah/24V – 36/55Ah
Model V: Normal counter balance
Model W: Additional counter balance
1)
These values are approximations only. The max. mark on the dipstick is
decisive in any case (see chapter 7.6 Checking the oil level and adding oil if
necessary, page 44).
2)
The values apply to continuous operation in any direction.
Exceeding these limit values causes engine damage.
3
722
1.6
1)
ltr.
Approx.
0.7
1)
ltr.
Max. 1% of fuel consumption, pertaining to full load
Min. 0.6bar at 850rpm
2)
Approx.
kg
106
108
Approx.
kg
HATZ
21Operator’s Manual
Technical data 1D90V, 1D90W
VARIABLE SPEED. ULTRA LOW SULFUR FUEL ONLY.
Power Category:
EMISSION CONTROL SYSTEM INFORM.:
Screw tightening torque
Designation Nm
Oil drain screw 50
4.2 Engine type plate
The layout of the EPA/CARB type plate depends on the engine application
and is affixed to the crankcase.
It contains the following information:
1 EPA/CARB engine family number
2 Engine type, customer specification and setting of pumping start (°
crankshaft before top dead center)
3 Engine serial number
4 Max. engine speed (rpm)
5 Model year
6 Displacement (liters) and inspection requirement for special settings
7 Injection pump effective stroke (mm) and engine capacity
8 Information on exhaust control system
9 “variable speed" or "constant speed only" (if necessary)
The type plate also defines the applicable emissions-related performance
class of the engine.
The figure shows an EPA/CARB type plate.
A text that refers to the exhaust legislation and corresponds to the engine
type is printed on the type plate (EPA or EPA and CARB).
22
Operator’s Manual
HATZ
1D90V, 1D90W Technical data
133 11 15 123456
Every engine is equipped with an additional unattached type plate. When the
engine is built into a machine and the original type plate is not readily visible,
the second unattached type plate must be affixed to the application in a position that is clearly visible for an average person.
The following data must always be specified in case of queries and for spare
parts orders:
2 Engine type/specification (only for special equipment)
3 Engine serial number
4 Max. engine speed (rpm)
Always install the engine appropriate for the intended application to fulfill the
EPA and CARB exhaust requirements.
4.2.1 Engine serial number
Breakdown of the engine serial number
1 Engine type number
2 Engine serial number
3 Model year
4 Fabrication number (consecutive)
Engine type number
The engine type number makes it possible to see if the engine is equipped
with a diesel oxidation catalyst (DOC). There more stringent requirements on
engine oil and fuel quality for engines with DOC (see chapter 4.4 Engine oil,
page 24 and chapter 4.5 Fuel, page 26. The following table shows which
engine types are equipped with DOC.
Engine type number Type number DOC
113 1D90V/W
168 1D90V/W X
170 1D90V/W X
HATZ
23Operator’s Manual
Technical data 1D90V, 1D90W
i
4.3 Physical operating conditions
Engine adjustment
The engine is normally adjusted to operate within the standard reference
conditions stipulated in ISO3046-1:
Parameter Unit Value
Intake air temperature °C +25
K 298
Relative humidity % 30
Air pressure
(at approx. 100 meters above sea
level)
kPa 100
NOTICE
If the machine is operated at high altitudes and high temperatures, adjustment of the engine setting may be necessary if the
climatic conditions were not taken into account when the machine was ordered. If this is the case, please contact your nearest HATZ service station.
4.4 Engine oil
Oil quality
All brand name oils that satisfy at least the following specification are suitable:
Engines with diesel oxidation catalyst (DOC)
(for details, see chapter 4.2.1 Engine serial number, page 23).
▪ ACEA E6 (recommended)
▪ ACEA E9
▪ ACEA C3 / C4 (HTHS ≥ 3.5 mPas)
▪ API CJ-4
24
CAUTION
Damage to the diesel oxidation catalyst (DOC) from using
unsuitable engine oil.
Unsuitable engine oil diminishes the functionality and service life
of the catalytic converter.
Only use engine oils with very low quantities of sulfate ash,
phosphor and sulfur – so-called "low SAPS" oils which fulfill at
least one of the specifications mentioned above.
Operator’s Manual
HATZ
1D90V, 1D90W Technical data
-40
-30
-20
-10
0
10
20
30
40
50
104
86
68
50
32
14
-4
-22
-40
OIL : SAE .. .
°C°F
5W/ 30
5W/ 40
10
W/
4
0
10W /3
0
15 W
/
40
30
40
122
10
W
Engines without diesel oxidation catalyst (DOC)
(for details, see chapter 4.2.1 Engine serial number, page 23).
▪ ACEA – B3 / E4 or better
▪ API – CF / CH-4 or better
If engine oils of a low quality standard are used, the oil change interval must
be reduced to 150 operating hours.
Oil viscosity
Choose the recommended viscosity based on the type of start (recoil,
crankhandle or electric) and on the engine temperature at which the engine
will be operated.
HATZ
CAUTION
Engine damage from unsuitable engine oil.
Unsuitable engine oil considerably reduces engine service life.
Only use engine oil that fulfills the specifications stipulated
above.
25Operator’s Manual
Technical data 1D90V, 1D90W
4.5 Fuel
Fuel type
All types of diesel fuel that meet the minimum requirements of the following
specifications are suitable:
▪ Europe: EN 590
▪ UK: BS 2869 A1 / A2
▪ USA: ASTM D 975-09a 1-D S15 or 2-D S15
▪ USA: ASTM D 975-09a 1-D or 2-D
(only suitable for engines without diesel oxidation catalyst - DOC)
For details with regard to equipping with DOC, see chapter 4.2.1 Engine
serial number, page 23
CAUTION
Danger of engine damage from low quality fuel.
The use of fuel that does not meet the specifications can lead to
engine damage.
▪ The use of fuel that does not meet specifications requires
approval by Motorenfabrik HATZ (main plant).
Winter fuel
When outside temperatures drop below 0°C, use winter fuel or mix in petroleum in advance:
26
Lowest ambient temperature at start [°C]
0 to -10
-10 to -15
-15 to -20
-20 to -30
CAUTION
Danger of damage to the diesel oxidation catalyst.
The use of petroleum with increased levels of sulfur will damage
the catalytic converter.
▪ Only mix petroleum with a maximum sulfur content of 50
ppm.
Operator’s Manual
Percentage of petroleum [%]for
Summer fuel Winter fuel
20
30
50
‑
‑
‑
20
50
HATZ
1D90V, 1D90W Engine design
5 Engine design
Overview
1 Oil filler plug
2 Dipstick
3 Engine type plate
4 Intake opening for combustion air
5 Dry air filter
6 Water separator
7 Cylinder head cover
8 Fuel cap
9 Intake opening for cooling air
10 Air filter maintenance indicator (option)
11 Speed control lever
12 Oil filter (option)
13 Fuel filter
14 Coolant air outlet
15 Silencer
16 Starter
17 Central connector for electrical equipment
18 Oil drain screw
HATZ
27Operator’s Manual
Transport, assembly and commissioning 1D90V, 1D90W
6 Transport, assembly and commissioning
6.1 Transport
Safety notes
WARNING
Danger of injury from improper lifting and transport.
Danger of crushing from falling or tipping of the machine.
▪ The machine may only be lifted using the lifting points (1).
▪ Only use a suitable hoist with a sufficient carrying capacity.
▪ Do not remain under suspended loads.
CAUTION
Only use the lifting eye for transporting the engine.
Do not use for lifting the entire machine.
CAUTION
Danger of injury from overloading the body.
Lifting the machine to transport it or to move it to another location can lead to injuries (of the back, for example).
▪ Only lift the machine with a hoist.
28
Transport conditions
▪ When transporting the machine, follow the safety instructions.
▪ When transporting, follow the applicable safety and accident prevention
regulations of the trade associations.
▪ After delivery, check the machine for completeness and transport damage.
▪ Only transport the machine when it is switched off and has cooled down.
▪ If you have questions on transporting the machine, please contact your
nearest HATZ service station. For contact data, see chapter 1 Impres-
sum, page 5 or www.hatz-diesel.com.
Operator’s Manual
HATZ
Loading...