Hatteland HT C02HI User Manual
USER MANUAL
Standard Models
Entry Level Models
HT C02 - Compact Computer
Standard Models: HT C02Hx STC-yzz-wzzz
Entry Level Models: HT C02HI STC-yzz-wzzz
where x=CPU type, y=OS, w=Power Input (AC or DC*), z=conguration
*DC models pending Q2/2015
User Manual HT C02
Updated: 04 Jun 2015 Doc Id: INB10042-4 (Rev 04)
Created: 363
Approved: 6987
Please visit www.hatteland-display.com for the latest electronic version of this manual.
Hatteland Display AS, Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway
Tel: (+47) 4814 2200 - mail@hatteland-display.com - www.hatteland-display.com
Copyright © 2015 Hatteland Display AS
Stokkastrandvegen 87B, N-5578 Nedre Vats, Norway.
All rights are reserved by Hatteland Display AS. This information may not, in whole or in part, be
copied, photocopied, reproduced, translated or reduced to any electronic medium or machine-
readable form without the prior written consent of Hatteland Display AS. Review also:
www.hatteland-display.com/pdf/misc/doc100703-1_permission_to_create_user_manuals.pdf
The products described, or referenced, herein are copyrighted to the respective owners.
The products may not be copied or duplicated in any way. This documentation contains proprietary
information that is not to be disclosed to persons outside the user’s company without prior written consent
of Hatteland Display AS.
The copyright notice appearing above is included to provide statutory protection in the event of
unauthorized or unintentional public disclosure.
All other product names or trademarks are properties of their respective owners !
WARNING: This is a class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Last revised 6 Jan 2015
Contents
Contents .................................................................................... 3
Contents of package .......................................................................................... 5
General ...................................................................................... 7
About this manual .............................................................................................. 8
About Hatteland Display .................................................................................... 8
www.hatteland-display.com ............................................................................... 8
Contact Information ........................................................................................... 8
Computers introduction ..................................................................................... 9
Product Labels (Examples) ............................................................................. 10
Serial Number and Operating System (OS) license label placement ......... 10
Installation ............................................................................... 13
Installation and mounting of computers ........................................................... 14
Cables ............................................................................................................. 14
Computer Upgrade Precaution Note ............................................................... 15
Housing / Terminal Block Connector Overview ............................................... 16
Cabinet cover removal ..................................................................................... 18
PCI / PCIe Card removal / replacement - Introduction .................................... 19
PCI / PCIe Card removal / replacement - Full Lenght & Full Height ................ 19
PCI / PCIe Card removal / replacement - Half Lenght & Full Height ............... 20
PCI / PCIe Card removal / replacement - Half Lenght & Half Height .............. 20
Internal Hard Drive (HDD) removal / replacement (Entry Level Models only) . 21
DVD/CD Drive removal / replacement (Standard Models only) ....................... 22
Air Filter removal / replacement (M153S30Q20-ACC0015) - Alternative #1 ... 23
Air Filter removal / replacement (M153S30Q20-ACC0015) - Alternative #2 ... 24
Front Fan removal / replacement .................................................................... 25
Mounting Brackets for Console Mounting - HT 00226 OPT-A1 ....................... 26
19 inch Rack Kit 4U - HT 00223 OPT-A1 ........................................................ 27
Sliding Rails - HT 00224 OPT-A1 (20”) / HT 00225 OPT-A1 (26”) .................. 27
Physical Connections ..................................................................................... 28
PCI Bracket Expansion Matrix ......................................................................... 33
Module Expansion Matrix ................................................................................ 35
Factory Standards ........................................................................................... 35
Factory Preset COM Port Numbering .............................................................. 38
Specications ......................................................................... 39
Specications - HT C02Hx STC-yzz-wzzz ...................................................... 40
Standard Models ......................................................................................... 40
Specications - HT C02HI STC-yzz-wzzz ....................................................... 41
Entry Level Models ..................................................................................... 41
3
IND100206-28
Contents
Specications Factory Options............................................. 43
Specications - COM Module RS-232 ............................................................. 44
PCA100294-1 ............................................................................................. 44
Specications - NMEA / IEC COM Module RS-422 / RS-485 ......................... 45
PCA100293-1 ............................................................................................. 45
Specications - CAN Module with CO-Processor ............................................ 47
HT 00254 OPT-A1.......................................................................................47
Specications - Isolated Digital Input/Output Module ...................................... 48
HT 00268 OPT-A1.......................................................................................48
Specications - LAN Module ........................................................................... 50
PCA100298-1 ............................................................................................. 50
Specications Accessories ................................................... 51
Specications - External Modules (USB) ......................................................... 52
Technical Drawings ................................................................ 55
Technical Drawings - HT C02Hx STC-yzz-wzzz .............................................. 56
Standard / Entry Level AC models .............................................................. 56
Technical Drawings - Accessories ........................................ 57
Technical Drawings - 19” Rack Kit 4U ............................................................. 58
HT 00223 OPT-A1.......................................................................................58
Technical Drawings - Mounting Brackets ......................................................... 60
HT 00226 OPT-A1.......................................................................................60
Technical Drawings - External Modules (USB) ................................................ 61
Appendixes ............................................................................. 63
BIOS - On-board COM Ports Conguration .................................................... 64
BIOS - How to create RAID volume ................................................................ 67
SSD Selection Guide ....................................................................................... 71
Pinout Assignments ......................................................................................... 75
Trouble-shooting .............................................................................................. 78
Declaration of Conformity ................................................................................ 79
Return Of Goods Information .......................................................................... 80
General Terms and Conditions ........................................................................ 81
Signal Output Combinations ............................................................................ 82
Notes ............................................................................................................... 83
Revision History ............................................................................................... 85
IND100206-28
4
Contents of package
Note: Entries listed below are for Standard factory shipments. Customized factory shipments may deviate from this list.
Item Description Illustration
TP52/TC11-1.8M
TP11/TC11-1.8M
FCE17-E2W2SS-2N0 &
L17DPPK09JSU (cover)
DV02-SK
MEDIA STD01
1 pcs of power cable European Type F “Schuko” to IEC.
Length 1.8m
Note: Only applicable for factory delivered units with AC Power Input
1 pcs of power cable US Type B plug to IEC.
Length 1.8m
Note: Only applicable for factory delivered units with AC Power Input
1 pcs of DC Power Input housing with internal cable screw terminal.
Note: Only applicable for factory delivered units with DC Power Input
1 pcs of DVI > RGB/VGA adapter
DVI 12+5P Male to DSUB 15P Female
Documentation and Driver DVD for factory installed components like mainboard, IDE,
network etc.
Note: To use this DVD disc you will need an external USB CD/DVD drive or provide
means of getting contents copied over via USB memory stick/network to the operating
system. You can alternatively download the drivers from our website www.hattelanddisplay.com
Mounting brackets incl. screws (for console mounting)
EUR TYPE F
US TYPE B
Operating Systems
IEC
IEC
Menu browser for
Microsoft®
Windows®
HT 00226 OPT-A1
Test Reports papers:
1 pcs of Product Declaration
1 pcs of Computer Checklist
1 pcs of BurnInTest Certificate
Package may also include: (based on accessories/options ordered)
Item Description Illustration
Depending on factory mounted options, connector kit as follows (incl. cover hood/cable housing):
4 x 4-pin Terminal Block 3.81 (Weidmüller 1792970000) for CAN Interface (HT 00254 OPT-A1)
+ 4 x Cover Hood (Weidmüller 1005290000 - BCZ 3.81 AH04 BK BX (4-pin)
4 x 5-pin Terminal Block 3.81 (Phoenix 1827732) for RS-422 / RS-485 NMEA COM (PCA100293-1)
+ 4 x Cable Housing (Phoenix 1834372 - KGG-MC 1,5/ 5 (5-pin)
4 x 5-pin Terminal Block 3.81 (Phoenix 1827732) for Digital Input/Output (HT 00268 OPT-A1)
Terminal Block Connector Kit
?
+ 4 x Cable Housing (Phoenix 1834372 - KGG-MC 1,5/ 5 (5-pin)
For computers that include 3rd party hardware; the package / accessories box may also include
additional CD / HW / Information from 3rd party supplier(s).
IND100207-17
5
This page left intentionally blank
6
General
7
Hatteland Display AS
About this manual
The manual contains electrical, mechanical and input/output signal specications. All specications in this manual,
due to manufacturing, new revisions and approvals, are subject to change without notice. However, the last update
and revision of this manual are shown both on the frontpage and also in the “Revision History” chapter at the end of
the manual.
Furthermore, for third party datasheet and user manuals, please see dedicated Documentation and Driver DVD
delivered with the product or contact our sales/technical/helpdesk personnel for support.
About Hatteland Display
Hatteland Display is the leading technology provider of specialized display and computer products, delivering high
quality, unique and customized solutions to the international maritime, naval and industrial markets.
The company represents innovation and quality to the system integrators world wide. Effective quality assurance and
investment in sophisticated in-house manufacturing methods and facilities enable us to deliver Type Approved and Mil
tested products. Our customer oriented approach, technical knowledge and dedication to R&D, makes us a trusted
and preferred supplier of approved solutions, which are backed up by a strong service network.
www.hatteland-display.com
You will nd our website full of useful information to help you make an informed choice as to the right product for your
needs. You will nd detailed product descriptions and specications for the entire range on Displays, Computers and
Panel Computers, Military solutions as well as the range of supporting accessories. The site carries a wealth of
information regarding our product testing and approvals in addition to company contact information for our various
ofces around the world, the global service centers and the technical help desk, all ensuring the best possible
support wherever you, or your vessel, may be in the world.
Contact Information
Head ofce, Vats / Norway:
Hatteland Display AS
Stokkastrandvegen 87B
N-5578 Nedre Vats, Norway
Sales ofce, Frankfurt / Germany:
Hatteland Display GmbH
Werner Heisenberg Strasse 12,
D-63263 Neu-Isenburg, Germany
Tel: +47 4814 2200
Fax: +47 5276 5444
mail@hatteland-display.com
Sales ofce, Oslo / Norway:
Solbråveien 20
N-1383 Asker
Norway
Tel: +47 4814 2200
Fax: +47 5276 5444
Sales ofce, Vista / USA:
Hatteland Display Inc
380 South Melrose Drive,
Suite 349
Vista, CA 92081
USA
Tel: +1 760-643-4061
Fax: +1 858-408-1834
For an up-2-date list, please visit www.hatteland-display.com/locations
General
8
Tel: +49 6102 370 954
Fax: +49 6102 370 968
Sales ofce, Aix-en-Provence / France:
Hatteland Display SAS
ACTIMART, 1140 RUE AMPERE, BP 50 196
13795 AIX-EN-PROVENCE, CEDEX 3
France
Tel: +33 (0) 4 42 16 47 57
Fax: +33 (0) 4 42 16 47 00
IND100077-1
Computers
Computers introduction
Hatteland Display’s range of type-approved computers is designed to perform in
harsh environments while providing the performance and flexibility you expect.
We offer rack mount and black box/standalone computer solutions for every
need. Our computers are used by system integrators, boat builders and endusers and can be found on all vessel types, all over the world.
If you are looking for a high quality computer for navigation, monitoring or
entertainment solutions, Hatteland Display can fulfil your high expectations at a
reasonable cost.
Our computer range covers all eventualities and requirements. We offer a wide
range of processor choices, HDD and power options, and solid state technology,
neatly engineered within industry standard form factors such as 19” rack mount,
2U and 4U solutions.
We continually develop our computers portfolio to make the best use of emerging
computer technology so you can be sure that your Hatteland Display computer
offers the power needed to run modern applications, with the flexibility to be
installed wherever you want, for any marine use.
Designed to perform in harsh environments...
IND101057-2
General
9
Product Labels (Examples)
IND100780-6 - Rev 03 - 02 Jul 2013
Product Range ID
Standard or reserved
customer chassis revision ID
Power
Input ID
Abbreviation for STandard computer or
reserved customer company name ID
Additional Hardware
Expansions
Con guration or
reserved customer
hardware ID
Standard Electronics / Mainboard and
Technology or reserved customer Hardware ID
Standard or reserved
customer chassis type ID
Mainboard
ID
HT
-
M
B 2
ST 1002-G
Processor Type
and Speed ID
G
Product Type ID
for Computer Range
Operating System
(OS) ID
C
A
Memory Type
and Size ID
3
Storage Type
and Size ID
J
Computers - Typenumber Overview
IND100780-6 - Rev 03 - 02 Jul 2013
This document explains the type number structure for the Hatteland Display Compact, Rackmount and Compact
Fanless product range manufactured after 2012. Example “HT B22”, “HT C02” and “HT 221”.
- Example standard typenumber:
HT B22GG STC-A3J-M100
- Example standard description:
Fanless Computer IntelQM57 i5 2.40GHz 2GBRAM 250GBHDD OSNone ACDC HDCOM-4i
= Locked elements for factory standards.
= Custom/options - Can be customized by customer.
Product Labels (Examples)
Serial Number and Operating System (OS) license label placement
Only present if the unit was delivered with factory installed Operating System (OS) such as
Microsoft® Windows® Embedded Enterprise. Label size is 7cm wide x 2.8cm high. The same
Product Key is also printed on the “Product Declaration” sheet that follows the unit, check contents
of package. Note: For certain OS, there is no physical Product Key Label required or a Product Key
Number that must be entered during installation / usage of the unit.
Serial Number Label Layout Example
Product Type
Quality Control (QC) label
Manufacturer & Country
Input Voltages & Power Rating
Label Size: 6cm x 2cm. Silver background with black text
Typenumber Structure (example)
Type Number / Serial Label shown below may not match your actual unit, but the structure ID description are still
valid. Reference: http://www.hatteland-display.com/pdink/ind100780-6.php
HT A
C 0
H
I
Serial Number Label Nomenclature
XX XXXXX XXX-XXX-XXXX-XXXXX NOMENCLATURE
HT C02HI STC-A33-A000-000001 Example Model Complete Typenumber-Serial
|| ||||| ||| ||| |||| ||||||- Serial Number, 6 digits (supports HWcode changes) ID
|| ||||| ||| ||| |||+-------- Additional Hardware/Software Conguration ID
|| ||||| ||| ||| ||+--------- PCI Conguration ID
|| ||||| ||| ||| |+---------- Hatteland Display Accessory USB Module Type ID
|| ||||| ||| ||| +----------- Power Supply Input Type ID
|| ||||| ||| ||+------------- Installed Storage Device(s) Type ID
|| ||||| ||| |+-------------- Installed Memory / RAM Type ID
|| ||||| ||| +--------------- Installed Operating System / No OS installed ID
|| ||||| ||+---------------- “C” for Computer Product Identication (Locked) ID
|| ||||| ++------------------ Abbreviation for Standard (ST) or reserved customer ID
|| ||||+--------------------- CPU / Processor Type ID
|| |||+---------------------- Motherboard Chipset ID
|| +++----------------------- Chassis / Electronics / Technology Revision ID
++--------------------------- Manufacturer ID / Product Series ID
General
10
ST 0002
Manufactured Date yyyymmdd
Barcode “128” (TYP+SNO)
3
C
A
3
IND100240-12
Product Labels (Examples)
Quality Control (QC) Label
This label indicates that the unit is produced, tested and packed according to manufacturer’s QA
specications. It will include a Personal ID and signature by the personnell responsible for approving
the unit in production, test and warehouse departments. Label size is 3cm wide x 2.3cm high.
IND100240-12
General
11
This page left intentionally blank
12
Installation
13
General Installation Recommendations
Installation and mounting of computers
1. Units may be intended for various methods of installation or mounting (rack mounting, panel mounting,
bracket mounting, ceiling/wall mounting); for details, please see the relevant mechanical drawings.
2. Adequate ventilation is a necessary prerequisite for the life of the unit. The air inlet and outlet openings must
denitely be kept clear; coverings which restrict ventilation are not permissible. The product might be without
any ventilation aperatures which means pt.2 does not apply.
3. Exposure to direct sunlight can cause a considerable increase in the temperature of the unit, and might under
certain circumstances lead to overtemperature. This point should already be taken into consideration when
the bridge equipment is being planned (sun shades, distance from the windows, ventilation, etc.)
4. Space necessary for ventilation, for cable inlets, for the operating procedures and for maintenance, must be
provided.
5. To further improve the cooling of the unit we recommend installing Cooling Fans underneath blowing upwards
into the unit air inlet. This may be required in high temperature applications and also when there is reason to
expect temperature problems due to non-optimal way of mounting.
6. This Product shall be grounded to protective Earth. For AC Power cables this is done trough the ground wire
in the connector, for DC input the ground bolt shall be used. A shorter and thicker cable gives better
grounding. A 6mm² is recommended, but a 4mm² or even 2.5mm² can be used for this purpose.
7. Expose to heavy vibration and acoustic noise might under certain circumstances affect functionality and
expected lifetime. This must be considered during system assembly and installation. Mounting position must
carefully be selected to avoid any exposure of amplied vibration.
General mounting instructions
1. The useful life of the components of all Electronics Units generally decreases with increasing ambient
temperature; it is therefore advisable to install such units in air-conditioned rooms. If there are no such
facilities, these rooms must at least be dry, adequately ventilated and kept at a suitable temperature in order
to prevent the formation of condensation inside the unit.
2. With most Electronic Units, cooling takes place via the surface of the casing. The cooling must not be
impaired by partial covering of the unit or by installation of the unit in a conned cabinet.
3. In the area of the wheel house, the distance of each electronics unit from the magnetic standard compass or
the magnetic steering compass must not be less than the permitted magnetic protection distance. This
distance is measured from the centre of the magnetic system of the compass to the nearest point on the
corresponding unit concerned. The exact distance is often mentioned in the specic product specications.
4. Transportation damage, even if apparently insignicant at rst glance, must immediately be examined and be
reported to the freight carrier. The moment of setting-to-work of the equipment is too late, not only for
reporting the damage but also for the supply of replacements.
5. The classication is only valid for approved mounting brackets provided by Hatteland Display. The unit shall
be mounted stand-alone without any devices or loose parts placed at or nearby the unit. Any other type of
mounting might require test and re-classication.
Cables
Use only high quality shielded signal cables. For RGB/DVI cables use only cables with separate coax for Red, Green
and Blue.
Installation
IND100210-19
14
General Installation Recommendations
CAUTION
This unit contains electrostatic sensitive devices.
Observe precautions for handling.
Computer Upgrade Precaution Note
Users who needs to open the computer to change PCI cards, install more memory, or set internal jumpers can do so
without voiding the warranty. Before opening a unit’s housing to remove or touch a board, proper ESD measurements
must be taken!
1. Operator should ground himself by using a wrist band.
2. The wrist band should be connected to ground via a ground cord.
3. A one megaohm resistor, installed in the wrist connection end of the ground cord, is a safety requirement.
4. Hatteland recommend to use an Static-dissipative ESD work mat positioned at the workplace. The 3M™ 8501
Portable Field Service Kit is a good choice for this purpose. Make sure that the mat, operator and product is wired/
grounded together.
All assisting persons who might come into contact with the endangered boards must also use the ESD equipment.
IND100210-4
Installation
15
General Installation Recommendations
5-pin Phoenix 1827732
MC 1,5/ 5-STF-3,81
Screwdriver: SZS 0,4X2,5mm
VDE, slot-headed.
Tightening torque min. 0.22 Nm.
Tightening torque max 0.25 Nm.
• RS-422 / RS-485 NMEA (PCA100293-1)
• Digital Input/Output (HT 00268 OPT-A1)
Identi ed on Hatteland Display product data sheet as:
“Terminal Block 3.81”
└ Reference: http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?reloadFrame=true&UID=1827732
4-pin Weidmüller 1792970000
BCZ 3.81/04/180F SN BK BX
Screwdriver: 0.4x2.5mm DIN 5264.
Tightening torque min.. 0.2 Nm.
Tightening torque max. 0.25 Nm.
• CAN Interface (HT 00254 OPT-A1)
Identi ed on Hatteland Display product data sheet as:
“Terminal Block 3.81”
└ Reference: http://catalog.weidmueller.com/catalog/Start.do?localeId=en&ObjectID=1792970000
Housing / Terminal Block Connector Overview
Housing / Terminal Block connectors are available in different sizes (example 2-pin, 4-pin, 5-pin) which plugs into the
connector area of the unit. They are mounted by factory default and delivered with the unit. The housing / terminal
block connectors have steering rails, which ensures that it can not be mounted wrong. The color of these connectors
may vary between black, green and orange depending on manufacturer. You may use approved equivalents of these
connectors, but note that warranty will be void if any damage would occur to either the unit’s original PCB terminal
socket connector or inside the unit (electronic components, boards etc.). The table below is applicable for any
Series X products, such as Display and Panel Computers, including newer type of Stand-Alone Computers.
Illustration Pins Manufacturer Details Connector used for module
If your installation require additional cable fasteners support, please use the provided Cover Hood and Cable Housing
shipped with the unit (contents of package). Illustrations below are approximate, actual Housing and Hood may
deviate slightly, but function remains the same.
Phoenix Cable Housing - Illustration Weidmüller Cover Hood - Illustration
Phoenix 1834372 - KGG-MC 1,5/ 5 (5-pin)
For Phoenix 5-pin:
https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1834372&library=usen&pcck=P-11-02-01&tab=1
For Weidmüller 4-pin
http://catalog.weidmueller.com/procat/Product.jsp;jsessionid=B040D5EB6832629E567C884809FDF6C1?productId=(%5b1005290000%5d)
Weidmüller 1005290000 - BCZ 3.81 AH04 BK BX (4-pin)
Installation
IND100210-20
16
General Installation Recommendations
Conguring Housing / Terminal Block connectors
Below is a brief illustration that might be useful during conguration and installation of such connectors. You will need
suitable pre-congured cable(s) and tools to congure the connector(s) and cable(s) that are present in your
installation environment. Below is a sample procedure for a 2-pin DC power connector. The procedure is the same for
other connectors of this type as listed in table above. Unit used as illustration below is for reference only.
FIG 3
FIG 1
FIG 1: Unscrew (from top) or make sure that the screw terminal (square area) are fully open, so you can secure the
inserted cables correctly to the loose housing connector (it may already be plugged into the unit as per factory
installation).
FIG 2
FIG 4
FIG 2: Insert cables* (from front) and screw / secure the cables by turning the screw on top of the housing to secure
the cables properly. Check that the cables is rmly in place and do not appear loose or falls out when pulling gently.
*Note: Required polarization verication (for instance -/+ for DC power input) should conform with the markings on
the connector area of the unit. Ignoring the markings on the unit or its add-on modules might damage the unit and/or
external equipment in which end, warranty will be void.
FIG 3: Plug the housing into the appropriate connector area of the unit (glass should be facing down) and check again
that the cables secured conforms with the markings on the connector area of the unit. Finalize the installation by
fasten the screws located in front on each side of the housing connector (FIG 4).
IND100210-20
Installation
17
General Installation Recommendations
Cabinet cover removal
Note: Areas of interest are marked in this section with arrows in RED color. Please disconnect ALL cables from the
computer unit before proceeding!
1: Unscrew 3 screws from top of cabinet.
Use a Pozidriv #2 screwdriver.
3: Push cover gently down while pushing forward approx
10mm [0.39”] away from the front.
2: Unscrew 3 thumb screws in rear of cabinet. Turn anti-
clockwise using your ngers or at screwdriver (if tight).
4: Lift the cover up with both hands.
IND100210-18
Repeat the procedure backwards to attach the cover again.
Installation
18
General Installation Recommendations
PCI / PCIe Card removal / replacement - Introduction
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Unscrew 2 screws on each side of the bracket.
Use a Pozidriv #2 screwdriver.
2: Push each side of the bracket, one forward and one
backwards in a 45 degree rotation clockwise to slide it out
of the tracks. Then lift up the the bracket to remove it.
PCI / PCIe Card removal / replacement - Full Lenght & Full Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Unscrew 1 screw to loosen the chosen PCI / PCIe
card bracket from the cabinet as indicated.
Use a Pozidriv #2 screwdriver.
Repeat the procedure backwards to nalize operation.
2: Remove or insert the desired PCI / PCIe card into the
slot. Make sure you do not force the card down, it
should be mounted with a rm grip with two hands and
performed in a straight up or downwards motion.
IND100210-18
Installation
19
General Installation Recommendations
PCI / PCIe Card removal / replacement - Half Lenght & Full Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Place the PCI / PCIe Half Length bracket as shown
and push/slide it in so it reaches the end of the card
and click in place at the end of the card.
2: Mount 2 screws on top to fasten the PCI / PCIe Half
Length bracket securely. Use a Pozidriv #2 screwdriver.
PCI / PCIe Card removal / replacement - Half Lenght & Half Height
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Place the PCI / PCIe Half Length/Half Height bracket
as shown and fasten it with 2 screws on the top. Use a
Pozidriv #2 screwdriver.
2: Notice the screw at the end of the bracket. By turning
this clockwise using your ngers the support piece will be
pulled downwards and towards the edge of the card, thus
making it secured. Use a fair amount of force.
IND100210-18
Installation
20
General Installation Recommendations
Internal Hard Drive (HDD) removal / replacement (Entry Level Models only)
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit and HDD’s before proceeding!
1: Unscrew 4 screws on each side of the PCI bracket.
Use a Pozidriv #2 screwdriver.
3: Disconnect any cables that are connected to the
HDD’s. Unscrew 4 screws on each side holding the
HDD bracket housing at the bottom of the cabinet.
2: Push each side of the bracket, one forward and one
backwards in a 45 degree rotation clockwise to slide it out
of the tracks. Then lift up the the bracket to remove it.
4: Lift the HDD bracket housing up. Then, depending of
HDD installed or beeing installed, unscrew 4 screws (2
on each side for each HDD) to detach the HDD from the
bracket housing. Use a Pozidriv #2 screwdriver.
IND100210-18
Repeat the procedure backwards to nalize operation.
Installation
21
General Installation Recommendations
DVD/CD Drive removal / replacement (Standard Models only)
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit and DVD/CD drive before proceeding!
1: Unscrew 1 thumb screw on the DVD/CD bracket.
Turn anti-clockwise using your ngers.
3: Shift DVD/CD Drive a bit to the side. Then pull it in the direction as indicated until it can be removed vertically.
2: Gently pull out the DVD/CD bracket away. Remember
it’s orientation and placement.
IND100210-18
Repeat the procedure backwards to nalize operation.
Installation
22
General Installation Recommendations
Air Filter removal / replacement (M153S30Q20-ACC0015) - Alternative #1
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit and cards before proceeding!
1: Unscrew 4 screws from the fan/lter cover in front of
the unit. Use a Pozidriv #2 screwdriver.
3: Gently pull out the Air Filter from the Air Filter Bracket. Either clean or replace it. (spare part available).
2: Gently pull out the fan/lter cover.
IND100210-18
Repeat the procedure backwards to nalize operation.
Installation
23
General Installation Recommendations
Air Filter removal / replacement (M153S30Q20-ACC0015) - Alternative #2
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit and cards before proceeding!
1: Remove cabinet cover (see beginning of this
chapter). When cabinet cover is off, unscrew 1 screw
on top which keeps the Air Filter Bracket in place.
Use a Pozidriv #2 screwdriver.
2: Gently pull/slide out the Air Filter Bracket as indicated.
3: Gently pull out the Air Filter away from the Air Filter Bracket. Either clean or replace it (spare part available).
Repeat the procedure backwards to nalize operation.
IND100210-18
Installation
24
General Installation Recommendations
Front Fan removal / replacement
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL
cables from the computer unit before proceeding!
1: Remove cabinet cover (see beginning of this chapter)
Then unscrew 4 screws from the fan/lter cover in
front of the unit. Use a Pozidriv #2 screwdriver.
2: Gently pull out the fan/lter cover.
3: Unscrew 1 screw on top that keeps the Air Filter
Bracket in place. Use a Pozidriv #2 screwdriver.
5: Unscrew 4 screws that keeps the fan in place.
Use a Pozidriv #2 screwdriver.
4: Gently pull up the Air Filter Bracket.
6: Lift/slide the fan up from the unit.
IND100210-18
Repeat the procedure backwards to nalize operation.
Installation
25
General Installation Recommendations
Mounting Brackets for Console Mounting - HT 00226 OPT-A1
Note: The unit comes with mounting brackets and screws for console mounting in the package. Please review
specications and “Technical Drawings - Accessories” chapter in this user manual for additional information.
Bracket View and Measurements 1: Bottom view showing 4 mounting holes.
2: Mount the brackets with 4 x M6x8 (included).
Note: Other/longer screws may damage the computer!
Connector Side
3: Bottom view with mounted brackets.
IND100210-18
Installation
26
Loading...