Hatco WBLI-FUL, WBLI-FULD, HWBLIB-FUL, HWBLIB-FULD, HWBLIB-FULDA General Manual

ITEM#

INSULATED SINGLE

Models HWBLI-FUL, -FULD HWBLIB-FUL, -FULD HWBLIB-FUL, -FULDA HWBI-FUL, -FULD HWBIB-FUL, -FULD HWBIB-FULDA

HWBHI-FUL, -FULD HWBHIB-FUL, -FULD HWBHIB-FULDA

Hatco insulated Built-In Heated Wells keep
food at safe serving temperatures longer. The
fully insulated construction retains heat
better, distributing it more evenly to keep
food hot and fresh.

FLEXIBILITY

The Insulated Single Built-In Heated Wells
are available in top or bottom mount
configurations and with or without a drain
The compact standard
in three mounting

control assembly comes

choices to accommodate
your steam table configuration: compact
front

mounted with or without a bezel, or

back

mounted without a bezel.

Options include a front mounted recessed
control that is angled for easy readability and
an Auto-Fill to maintain proper water levels
and insure optimum serving temperatures.

QUALITY

The following features assure the finest
performance for years to come:

• Fully insulated wells on sides and bottom

ensure better heat retention, and cooler
surrounding surfaces for customer safety.

• Faster preheat and recovery for improved

energy efficiency.

• Full

-size models in low, standard, and high

watt.

• Separate lighted ON/OFF rocker switch and

temperature dial for easy operation.

• 50% larger drain with flat screen simplifies

cleaning and holds pans level.

• Easy service access to heating elements and

thermostats.

• Mounting kits for combustible countertops

available.

• EZ locking hardware for quick installation.

• Thicker stainless steel construction and solid

braised joints for durability.

• An optional WM Control Assembly is also

available that will replace most existing
controls on a customer's Drop-In Heated
Well Unit.

hot

.

BUILT-IN HEATED WELLS

Model HWBIB-FULD
with accessory food pan

Model HWBI-FULD
with accessory food pan

Fully insulated

Ordering Instructions

Please specify the following with each order:

1. Desired Voltage: 120, 208, or 240V

2. Base Size of Heated Well:

Insulated Wells are Rectangular Full Size
(12" x 20" (305 x 508 mm))

3. Drain (with or without)

4. Mounting Style:

A. Top Mounted
B. Bottom Mounted

5. Wattage:

A. High Watt
B. Standard Watt
C. Low Watt (120V only)

6. Agency:

A. UL and CUL
B. UL-EPH (sanitary listing)
C. CE Mark available on standard and high

watt units

Quick access heating element and
thermostat, for easy service

Built-in Heated Wells Countertop Cutout Dimensions

Model Minimum Width Maximum Width Minimum Depth Maximum Depth Below Counter

HWBI-FUL 12.75" (324 mm) 12.94" (328 mm) 20.75" (528 mm) 20.94" (531 mm) 9.45" (240 mm)

•

HWBI-FUL
HWBIB-FUL▲12.03" (306 mm) 12.03" (306 mm) 20.03" (509 mm) 20.03" (509 mm) 9.45" (240 mm)
HWBIB-FULDA▲12.03" (306 mm) 12.03" (306 mm) 20.03" (509 mm) 20.03" (509 mm) 9.45" (240 mm)

•

Indicates cutout dimensions for a combustible countertop surface.

▲

Must be flanged.

14" (356 mm) 14.25" (362 mm) 22" (559 mm) 22.25" (565 mm) 9.45" (240 mm)

Control Cutout Dimensions

A. Standard Compact Control Panel Cutout: Front

Back

2.16"W (55 mm) x 3.38"H (86 mm)
B. Optional Recessed Control Panel Cutout:
C. Optional WM Control Assembly Panel Cutout:

3.25"W (83 mm) x 3.75"H (95 mm),

5.88"W (149 mm) x 6.38"H (162 mm)

4.78"W (121 mm) x 5"H (127 mm)

Control Cutout Dimensions for HWBIB-FULDA

A. Standard Control Panel Cutout: 10

.13"W (257 mm) x 4.75"H (121 mm)

construction keeps
heat inside well cavity

METAL SHEATHED ELEMENTS GUARANTEED AGAINST
BURNOUT AND BREAKAGE FOR TWO YEARS.

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]

Form No. HWBI-FUL Spec Sheet

Printed in U.S.A.

September 2009

ITEM#

4.77"

(121 mm)

20.08" (510 mm)

22" (559 mm)

12.09"

(307 mm)

13.97"

(355 mm)

1.91"

(48 mm)

36" (914 mm)
FLEXIBLE CONDUIT

9.45"

(240 mm)

SIDE VIEW

FRONT VIEW

3.55" (90 mm)

4.77"

(121 mm)

21.77" (553 mm)

13.7"

(348 mm)

1.91"

(48 mm)

36" (914 mm)
FLEXIBLE CONDUIT

9.45"

(240 mm)

SIDE VIEW

FRONT VIEW

3.55" (90 mm)

10°

CONTROL

PANEL

7.73"

(196 mm)

3.63"

(92 mm)

6.33"

(161 mm)

9.45"

(240 mm)

36"

(914 mm)

PVC

TUBING

5.5"

(140 mm)

3.95"

(100 mm)

SIDE VIEWFRONT VIEW

10.94"

(278 mm)

12.09"

(307 mm)

13.97"

(355 mm)

20.08" (510 mm)

22" (559 mm)

36" (914 mm)
FLEXIBLE CONDUIT

INSULATED SINGLE

Models HWBLI-FUL, -FULD HWBLIB-FUL, -FULD HWBLIB-FUL, -FULDA HWBI-FUL, -FULD HWBIB-FUL, -FULD HWBIB-FULDA

HWBHI-FUL, -FULD HWBHIB-FUL, -FULD HWBHIB-FULDA

Model HWBI-FUL
Insulated Top Mount Series

Model HWBIB-FUL with Auto-fill
Insulated Bottom Mount Series

SPECIFICATIONS

Full Size Insulated Rectangular Models – Low Watt

Model* Volts Watts Amps Shipping Weight

HWBLI-FUL
HWBLI-FULD 30 lbs. (14 kg)

HWBLIB-FUL
HWBLIB-FULD 33 lbs. (15 kg)

HWBLIB-FULDA

Full Size Insulated Rectangular Models – Standard Watt

Model* Volts Watts Amps Shipping Weight

HWBI-FUL
HWBI-FULD

HWBIB-FUL
HWBIB-FULD

HWBIB-FULDA 208 1215 5.9

120 750 6.3

120 750 6.3

120 765 6.4

120 10.0
208 1200 5.8
240 5.0

120 10.0
208 1200 5.8
240 5.0

120 10.1

240 5.1

Optional
Control
Assembly

27 lbs. (12 kg)

30 lbs. (14 kg)

33 lbs. (15 kg)

27 lbs. (12 kg)
30 lbs. (14 kg)

30 lbs. (14 kg)
33 lbs. (15 kg)

33 lbs. (15 kg)

BUILT-IN HEATED WELLS

Model HWBIB-FULDA with Auto-fill
Insulated Bottom Mount Series

Full Size Insulated Rectangular Models – High Watt

Model* Volts Watts Amps Shipping Weight

HWBHI-FUL
HWBHI-FULD

HWBHIB-FUL
HWBHIB-FULD

HWBHIB-FULDA 208 1665 8.0 33 lbs. (15 kg)

* “D” added to model number indicates unit with ¾” drain.

“A” added to model number indicates unit with auto-fill.
“I” added to model number indicates insulated unit.
“B” added to model number indicates bottom mount unit.

120 13.8
208 1650 7.9
240 6.9

120 13.8
208 1650 7.9
240 6.9

120 13.9

240 7.0

27 lbs. (12 kg)
30 lbs. (14 kg)

30 lbs. (14 kg)
33 lbs. (15 kg)

DIMENSIONS

HWBI-FUL Insulated Top Mount Series: 13.7"W x 21.77"D x 9.45"H
(348 x 553 x 240 mm).
HWBIB-FUL Insulated Bottom Mount Series: 13.97"W x 22"D x 9.45"H
(355 x 559 x 240 mm).

Control Panel

Standard Compact: 3.55"W x 1.91"D x 4.77"H (90 x 48 x 121 mm).
Optional Recessed: 6.38"W x 3.63"D x 7.75"H (162 x 92 x 197 mm).
Optional WM Control: 5.88"W x 3

.

95"D x 6.25"H (149 x 100 x 159 mm). Not

available in Export voltages.
HWBIB-FULDA Insulated Bottom Mount Series: 13.97"W x 22"D x 9.45"H
(355 x 559 x 240 mm).

Control Panel: 10.94"W x 3.95"D x 5.5"H (278 x 100 x 140 mm).

VOLTAGE

120, 208, and 240 volts, single phase. Export voltages available.

OPTIONS (NOT FOR RETROFIT)

❑ Flush Mount Control Box and WM Assembly Control Bezel in

Designer Colors: Warm Red, Black, Gray Granite, White Granite, Navy
Blue, Hunter Green, Antique Copper (not available for HWBIB­FULDA models)

❑ Extended High Temp Lead Wire (Lead wire only – conduit not

included) (Models are shipped with 1' (305 mm) of lead wire – no
conduit)

❑ Thermostat with 6' (1829 mm) Capillary
❑ Larger Recessed Thermostat Control (not available for

HWBIB-FULDA models)

ACCESSORIES

❑ Mounting Kit for Combustible Countertops (not necessary for

Bottom Mount models)

❑ Adapter to Convert Warmer to Hold Two 7 Quart

(7 Liter) Inserts

❑ Adapter to Convert Warmer to Hold Three 4 Quart

(4 Liter) Inserts

❑ 12" (305 mm) and 20" (508 mm) Pan Support Bars
❑ Stainless Steel Food Pans

❑3⁄4" NPT Ball or Gate Valve for Units with a Drain.

❑ WM Control Assembly (not available for auto-fill models)

PRODUCT SPECS

Built-in Heated Well

The Built-in Heated Well shall be a Model ….as manufactured
by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.

With 24/7 service (U.S. and Canada only), the Built-in Heated Well shall be
rated at ….watts, ….volts, and be ….inches (millimeters) in overall width
and be ….inches (millimeters) in overall depth. It shall consist of stainless

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]

Form No. HWBI-FUL Spec Sheet September 2009

and aluminized steel housing with a metal sheathed heating element,
EZ locking hardware for installation, and a remote thermostat with
lighted power switch.

Accessories may include stainless steel mounting kit, adapter bars,
adapter top, and valves.

Printed in U.S.A.