Hatco TM-5H Parts List

IMPORTANT NOTE: See page 2 for important
®
information on how to use this Replacement Parts List.
TOAST-MAX
Electric Conveyor Toasters
TM Series
TM-5H TM-10H
REPLACEMENT PARTS LIST
T M - X H
Toast-Max
High Opening 5 = One Slice Width
10 = Two Slice Width
HATCO TOAST-MAX CONVEYOR TOASTERS
2
3
15
5
20 21
23
22
19
17
16
4
18
1
14
13
11
35
10
8
7
26
27
8B
9
30
29
31
32
33
34
12
28
25
6
24
Specification Label on back of unit.
CAUTION
Week Thirty-Three
0833
Year 2008
TM-5H, TM-10H Series
Model Designation
IMPORTANT! — HOW TO USE THIS REPLACEMENT PARTS LIST
This ReplacementParts List representstoasters builtbeforeand after a manufacturing and part number change. Toasters with a manufacturing date code of 0830 and older use Item numbers with the “A” suffix. Toasters with a manufacturing date code of 0831 and newer use Item numbers with the “B” suffix. Item numbers that are not broken down with “A” or “B” suffixes are the same for all manufacturing date codes.
NOTE: The last four digits in a ten digit numerical serial number
are the manufacturing date code. Example: Serial number 9625060833 has a date code
of “0833” which indicates the following:
Use of replacement parts other than those supplied by HatcoCorporationmayresultin damageto the unit or injury to personnel and will void all warranties.
Form No. TMRP-0509
2
PARTS COMMON TO ALL TM-5, -10H MODELS
Item Description Part No. Qty.
1A TerminalBlock — 3 Pole X02.15.052.00 1 1B TerminalBlock — 3 Pole 02.15.050.00 1 2A Side Panel (LH) X04.05.436.00 1 2B Side Panel (LH) 04.05.564.00 1 3A Diode X02.40.046.00 1 3B None (included w/Item 16B) --­4A Control Knob X05.30.093.00 2 4B Control Knob 05.30.020.00 2 5 Selector Switch 02.19.174.00 1 6 Cord Grip 02.20.259.00 1
Item Description Part No. Qty.
7A Thumb Screw X05.04.488.00 2 7B Thumb Screw 05.04.371.00 2 8A BearingAssembly, FrontandRear X05.02.024.00 4 8B Bearing Assembly, Rear 04.05.286.00 2
Bearing Assembly, Front 04.05.387.00 2 9 Retaining Ring 05.11.035.00 1 10 Leg, 10 cm (4”) 05.30.007.00 4 11A Side Panel (RH) X04.05.437.00 1 11B Side Panel (RH) 04.05.563.00 1 12A Bracket, Heating Element X04.05.449.00 2 12B Bracket, Heating Element 04.05.575.00 2
PARTS SPECIFIC TO MODEL TM-5H
100V 120V 220–240 (CE)
Item Description 50 Hz 60 Hz 50 Hz
13A Top Cover w/Insulation 13B Top Cover w/Insulation 14 Reflector, Upper Element 15 Wire Feed Ramp 16A Speed Control, Rheostat X 16B Speed Control, Rheostat and DiodeAssembly 17A Indicator Light, Green X
Indicator Light, Red (not shown) X
17B Indicator Light, Green
Indicator Light, Red (not shown) 18 Crumb Tray 19A Decal, Control X 19B Decal, Control 20A Fan, Circulating X 20B Fan, Circulating 21A Fan Guard X 21B Fan Guard 22 Cover, Cooling Fan 23 Discharge Chute 24 Shaft Assembly (Qty. 2) 25A Rear Discharge Tray X 25B Rear Discharge Tray 26A Discharge Vane X 26B Discharge Vane 27 Wire Belt 28 Sprocket, Conveyor 29 Drive Chain 30 Sprocket, Motor* 31 Gear Motor 32 Heating Element, Upper, 700 Watt 33 Heating Element, Lower, 600 Watt 34A Reflector, Lower Element X 34B Reflector, Lower Element 35 Power Cord — Nema 5-15 Plug R
Power Cord — No Plug
Power Cord — BS1363 Plug
Power Cord — Schuko Plug
Electrical Drawing
† Drive Chain P/N 05.03.040.00 is used on TM-5H models manufactured before year 2005, week thirty-eight.
* Units equipped with the BS1363 plug set use Motor Sprocket P/N 05.09.057.00 (14 tooth).
*
X04.05.435.00 X04.05.435.00 X04.05.435.00 R04.05.562.00 R04.05.562.00 R04.05.562.00
04.05.612.00 04.05.612.00 04.05.612.00
04.05.611.00 04.05.611.00 04.05.611.00
02.13.331.00
02.13.339.00
02.19.185.00
02.19.184.00
--- ---
02.19.154.00 02.19.154.00
R04.05.580.00 R04.05.580.00 R04.05.580.00
07.03.465.00
07.01.323.00 07.01.323.00 07.01.323.00
02.12.085.00
02.12.030.00 02.12.030.00 02.12.039.00
02.12.084.00
--- --- ---
--- --- ---
04.05.583.00 04.05.583.00 04.05.583.00
04.05.610.00 04.05.610.00 04.05.610.00
04.05.439.00
04.05.584.00 04.05.584.00 04.05.584.00
04.05.440.00
04.05.582.00 04.05.582.00 04.05.582.00
05.03.057.00 05.03.057.00 05.03.057.00
05.09.055.00 05.09.055.00 05.09.055.00
05.03.049.00 05.03.049.00 05.03.049.00
05.09.056.00 05.09.056.00 05.09.056.00
02.12.081.00 02.12.081.00 02.12.096.00
02.05.677.00
02.05.680.00
04.05.526.00
--- --- ---
02.18.154.00 R02.18.154.00
--- ---
--- ---
--- ---
10-01-356 10-01-356 10-01-356
---
---
---
X
02.19.184.00
X
07.03.465.00
X
02.12.085.00
X
02.12.084.00
X
04.05.439.00
X
04.05.440.00
02.05.678.00
02.05.681.00
X
04.05.526.00
X
02.13.330.00
02.13.338.00
X
02.19.175.00
X
02.19.176.00
02.19.150.00
X
07.03.465.00
X
02.12.082.00
X
02.12.084.00
X
04.05.439.00
X
04.05.440.00
02.05.679.00
02.05.682.00
X
04.05.526.00
02.18.038.00
02.18.068.00
02.18.038.00
---
---
3
Form No. TMRP-0509
PARTS SPECIFIC TO MODEL TM-10H
HATCO CORPORATION
P.O. Box 340500
Milwaukee, WI 53234-0500 U.S.A.
Telephone (414) 671-6350 International Fax (414) 671-3976 partsandservice@hatcocorp.com
www.hatcocorp.com
HATCOCORPORATION ASIAHEADQUARTERS
Unit 101, Premier Center, 20 Cheung Shun Street
Cheung Sha Wan, Kowloon, H.K.
Telephone (852) 2991-4121
Fax (852) 2991-4181
hongkong@hatcocorp.com
100V 120V 220–240 (CE)
Item Description 50 Hz 60 Hz 50 Hz
13A Top Cover w/Insulation 13B Top Cover w/Insulation 14 Reflector, Upper Element 15 Wire Feed Ramp 16A Speed Control, Rheostat 16B Speed Control, Rheostat 17A Indicator Light, Green
Indicator Light, Red (not shown)
17B Indicator Light, Green
Indicator Light, Red (not shown) 18 Crumb Tray 19A Decal, Control 19B Decal, Control 20A Fan, Circulating 20B Fan, Circulating 21 Fan Guard 22A Cover, Cooling Fan 22B Cover, Cooling Fan 23 Discharge Chute 24 Shaft Assembly (Qty. 2) 25A Rear Discharge Tray 25B Rear Discharge Tray 26A Discharge Vane 26B Discharge Vane 27 Wire Belt 28 Sprocket, Conveyor 29 Drive Chain 30 Sprocket, Motor* 31 Gear Motor 32 Heating Element, Upper, 900 Watt
Heating Element, Upper, 1000 Watt 33 Heating Element, Lower, 800 Watt
Heating Element, Lower, 900 Watt 34A Reflector, Lower Element 34B Reflector, Lower Element 36 Power Cord — Nema 5-15 Plug
Power Cord — No Plug
Power Cord — BS1363 Plug
Power Cord — Schuko Plug
Electrical Drawing
*
---
---
---
---
---
---
---
---
--- ---
---
---
---
---
---
---
--- --- ---
--- X04.05.446.00 X04.05.446.00
--- --- ---
---
---
---
---
---
---
---
---
---
---
---
--- 02.05.675.00 ---
--- 02.05.676.00 ---
--- ---
---
--- --- ---
---
--- ---
--- ---
--- ---
---
X04.05.434.00 X04.05.434.00 R04.05.619.00 R04.05.619.00
04.05.615.00 04.05.615.00
04.05.640.00 04.05.640.00
X
02.13.331.00
02.13.339.00 02.13.338.00
X
02.19.185.00
X
02.19.184.00
02.19.154.00 R04.05.625.00 R04.05.625.00 X
07.03.466.00
07.01.326.00 07.01.326.00 X
02.12.085.00
02.12.030.00 02.12.039.00
04.05.628.00 04.05.628.00
04.05.386.00 04.05.386.00 X
04.05.438.00
04.05.629.00 04.05.629.00 X
04.05.441.00
04.05.627.00 04.05.627.00
05.03.036.00 05.03.036.00
05.09.055.00 05.09.055.00
05.03.049.00 05.03.049.00
05.09.056.00 05.09.056.00
02.12.081.00 02.12.096.00
X
04.05.528.00
R02.18.154.00
10-01-356 10-01-356
X
02.13.330.00
X
02.19.175.00
X
02.19.176.00
02.19.150.00
---
X
07.03.466.00
X
02.12.082.00
X
04.05.438.00
X
04.05.441.00
02.05.642.00
02.05.674.00
X
04.05.528.00
---
02.18.038.00
02.18.068.00
02.18.038.00
† Drive Chain P/N 05.03.044.00 is used on TM-10H models manufactured before year 2005, week thirty-eight. * Units equipped with the BS1363 power cord and plug set use Motor Sprocket P/N X05.09.057.00 (14 tooth).
May 2009 Form No. TMRP-0509
Loading...