Hatco HCWBI-2DA User Manual
Project
Item #
Quantity
Drop-In Hot/Cold Wells
Models: HCWBI-2DA, -3DA, -4DA, -5DA, -6DA
Hatco Drop-In Hot/Cold Wells combine the legendary
technology of both the Hatco Heated and Refrigerated
Wells into one unit to create the ultimate exibility in your
buffet line or catering needs. You can keep hot foods at
safe serving temperatures during the morning hours and
then switch to pre-chilled food products at the lunch
hour peaks.
Standard features
• Hot/Cold Combination Drop-In Well can house a variety of pans,
full-size, half-size or third-size and available in a two through six
pan conguration
• Easy to read and use electronic control assembly and pan
support bars
• Cold Mode: Similar to Hatco’s CWB Cold Well, including
auto-defrost, easy serviceability, optimal insulation and efcient
condenser. Includes cold mode pan supports
• Hot Mode: Utilizes the same time-tested FR2 Hydro-Heater
(Bain Marie) with “free ow” technology for an efcient and safe
operation with a longer life, and includes drain, auto-ll and hot
mode frame for pan support
•
Adjustable set points to keep your particular food items at
optimum temperatures
•
Remote control box can be mounted to front counter for easy
access (any vertical surface within approximately 5' (1524 mm)
• Matches the Hatco line of Refrigerated and Heated Wells for a
fully integrated look
• Allow approximately 60 minutes or more for transition between
operating modes of the Drop-In Hot/Cold Well
Hot Mode: HCWBI-2DA shown
with accessory food pans
and hot mode pan supports
(included), which are designed
specically for easier and safer
handling of foods.
Cold Mode: HCWBI-2DA shown with
accessory food pans and cold pan support
bars. Unique angled inside wall design
provides easy access and clear views, while
allowing cold air to effectively blanket your
food product.
“COLD – OFF – HOT” three
position rocker switch, with
digital read-outs for either the
hot or cold mode.
Options
c
Additional Four Year Parts Only Warranty on the Compressor
c
Three-Phase Wiring
(available at time of purchase only)
Accessories
c
FR2: Flush Hose, Cleaning Brush, Stopper and Adapter
c
12" (305 mm) Pan Support for Drop-In Refrigerated Wells
c
20" (508 mm) Pan Support for Drop-In Refrigerated Wells
Rectangular Full-Size Stainless Steel Food Pans:
c
Third-Size (2.5" [64 mm] H)
c
Full-Size (2.5" [64 mm] H)
c
Full-Size (6" [152 mm] H)
c
Half-Size (2.5" [64 mm] H)
c
Full-Size (4" [101 mm] H)
HATCO CORPORATION
(800) 558-0607
Form No. HCWBI Spec Sheet Page 1 of 2 April 2016
(414) 671- 6 3 50
l
l
www.hatcocorp.com
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Drop-In Hot/Cold Wells
Models: HCWBI-2DA, -3DA, -4DA, -5DA, -6DA
All HCWBI-2DA, -3DA, -4DA, -5DA, -6DA Series
6-Pan: 84" (2134 mm)
5-Pan: 71" (1803 mm)
4-Pan: 58" (1473 mm)
3-Pan: 45" (1143 mm)
2-Pan: 32" (813 mm)
FRONT VIEW
27" (686 mm)
26.5"
(674 mm)
Power Supply
Location
(5 foot [1524 mm] whip)
Well Opening
Drain connection location.
Standard hose thread 3/4" GHT
(garden hose thread). Drain hose
must be attached for unit to operate.
Cutout Dimensions for Drop-In Hot/Cold Wells
(A)
Model Minimum Width (A) Maximum Width (A) Minimum Depth (B) Maximum Depth (B)
HCWBI-2DA
(B)
HCWBI-3DA
HCWBI-4DA
HCWBI-5DA
HCWBI-6DA
Water supply location standard hose thread.
3/4" GHT water supply must be attached for
unit to operate. Field adjustable to right or
left side of heater.
30.125" (765 mm)
43.125" (1095 mm)
56.125" (1426 mm)
69.125" (1756 mm)
82.125" (2086 mm)
31" (787 mm)
44" (1118 mm)
57" (1448 mm)
70" (1778 mm)
83" (2108 mm)
SPECIFICATIONS
Drop-In Full-Size Insulated Rectangular Models
Model
HCWBI-2DA
HCWBI-3DA
HCWBI-4DA
HCWBI-5DA
HCWBI-6DA
* Shipping weight includes packaging and is approximate.
Dimensions
(Width x Depth x Height)
32"x 27" x 26.5" (813 x 686 x 674 mm)
45" x 27" x 26.5" (1143 x 686 x 674 mm)
58" x 27" x 26.5" (1473 x 686 x 674 mm) 1/3 hp
71" x 27" x 26.5" (1803 x 686 x 674 mm)
84" x 27" x 26.5" (2134 x 686 x 674 mm)
Well Height
12" (305 mm)
Compressor
Size
1/4 hp
1/2 hp
SIDE VIEW
25.19" (640 mm) 26" (660 mm)
Volts Watts
120/208
120/240 12.5 7.3
120/208 14.5 8.4
120/240 12.5 7.3
120/208
120/240 16.7 9.6
120/208
120/240 25.0 14.5
120/208 28.8 16.7
120/240 25.0 14.5
3000
4000
6000
Amps
Single Three
14.5 8.4
19.2 11.2
28.8 16.7
Plug
Hardwired
Ship
Weight*
230 lbs. (104 kg)
270 lbs. (96 kg)
310 lbs. (114 kg)
350 lbs. (137 kg)
389 lbs. (177 kg)
PRODUCT SPECS
Drop-In Hot/Cold Wells
The Drop-In Hot/Cold Well shall be a Model ….as manufactured by the Hatco
Corporation, Milwaukee, WI 53234 U.S.A., the Drop-In Hot/Cold Heated Well shall
be rated at ….watts, ….volts, and be ….inches (millimeters) in overall width and be
….inches (millimeters) in overall depth. It shall consist of stainless and aluminized steel
housing, electronic control panel (digital temperature display, drain, auto-ll, power
light, and 3-position rocker switch (Hot, Off, and Cold), and pan support bars for fullsize pans in cold and hot modes.
COLD MODE: A condensing unit, sight glass, service valves, receiver, and a dryer/
lter. The digital temperature display for the Cold mode will have a set point of 32°F
(0°C) and can be adjusted from 10° to 50°F (-12° to 10°C).
(800) 558-0607
Form HCWBI Spec Sheet Page 2 of 2 April 2016
HATCO CORPORATION
(414) 671- 6 3 50
l
l
www.hatcocorp.com
l
HOT MODE: The patented Hatco FR2 (Bain-Marie) shall consist of 1 to 3 stainless
steel tubes wrapped with external heating elements. Each tube may be accessed for
cleaning purposes. The unit may be emptied easily by a convenient drain and have
a low-water cut-off. The digital temperature display for the Hot mode will have a set
point of 192°F (89°C) and can be adjusted from 65° to 192°F (18° to 89°C).
Accessories may include pan support bars, and stainless steel food pans.
Warranty consists of 24/7 parts and service assistance (U.S. and Canada only)
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Loading...