Hatco GRSDS-H-30D User Manual
GLO-RAY
Models GRSDH-24, -30, -36, -41, -52, -60 GRSDH-24D, -30D, -36D, -41D, -52D, -60D GRSDS-24, -30, -36, -41, -52, -60
GRSDS-24D, -30D, -36D, -41D, -52D, -60D, -24T, -36T GRSDS/H -30D, -36D, -41D, -30DHW, -36DHW, -41DHW
The perfect unit to merchandise hot fast
foods is the Hatco Glo-Ray® Merchandising
Display Warmer. Designed specifically to hold
hot wrapped or boxed product, this unit
holds hot food safely at proper serving
temperatures. Glo-Ray Merchandising
Warmers have prefocused infrared top heat
and a thermostatically-controlled hardcoated
heated base to extend the holding times
of most food.
Hardcoated shelves, adjustable dividers,
shatter-resistant incandescent display lights,
and 6' (1829 mm) cord with plug are
standard.
FLEXIBILITY
This warmer offers the convenience
of self-serve and the efficiency of
kitchen-to-server holding.
Available with horizontal shelves, the Glo-Ray
Merchandising Warmers are offered in both
single and dual shelf models. Slant shelves are
offered in single, dual and triple shelf models.
Specially coated incandescent lights
illuminate the food holding area.
Designed with a slanted base and horizontal
center shelf, the GRSDS/H series is ideal
for holding popcorn on the top shelf
and nachos, boxed pizza, or wrapped
sandwiches on the bottom shelf. An
optional high wattage top shelf is ideal for
holding fried foods and an optional top shelf
clearance of 15" (381 mm) is also available.
Slant models 30" (762 mm) and wider will
accommodate 18" x 26" (457 x 660 mm)
sheet pans.
QUALITY
The following features assure the finest
performance for years to come:
• All models have prefocused infrared top
heat directing heat to the outer edges
of the holding surface where heat loss
is the greatest.
• Thermostatically-controlled, hardcoated
heated base with a temperature range
of 185° - 200°F (85° - 93°C), to extend
holding times.
• Coated shatter-resistant incandescent lights
enhance product display while safeguarding
food products from bulb breakage.
• An optional Indicating Temperature Control
enhances accurate control of temperature
and provides digital readout of temperature.
ITEM#
®
ERCHANDISING DISPLAY WARMERS
M
Model GRSDH-30
orizontal single shelf
h
Model GRSDS-24T triple slant
helf in optional Designer black
s
Model GRSDS/H-36D with
slant base and horizontal top
shelf and optional 15" (381
mm) clearance top shelf
Divider Rods
Model Width No. of Divider Rods Average Chute Width
24" ( 610 mm) 5 Rods 3.75" ( 95 mm)
30" ( 762 mm) 6 Rods 4.25" (108 mm)
36" ( 914 mm) 7 Rods 4.5" (114 mm)
41" (1041 mm) 8 Rods 4.5" (114 mm)
52" (1321 mm) 10 Rods 4.63" (117 mm)
60" (1524 mm) 12 Rods 4.5" (114 mm)
Provided per Shelf
METAL SHEATHED HEATING ELEMENTS GUARANTEED
AGAINST BURNOUT AND BREAKAGE FOR TWO YEARS,
BLANKET HEATING ELEMENTS FOR ONE YEAR.
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 • (414) 671-6350 • Fax (800) 543-7521 • Int’l. Fax (414) 671-3976
www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. GRSD Spec Sheet
Printed in U.S.A.
June 2013
ITEM#
2
4" to 60" (610 to 1524 mm)
FRONT VIEW
21.4"
(
544 mm
1
1.03"
(
280 mm)
7.08" (180 mm)
7
.08" (180 mm)
1
9.5" (495 mm)
SIDE VIEW
.89" or 3.89"
(23 or 99 mm)
24" to 60" (610 to 1524 mm)
FRONT VIEW
28.38"
(
721 mm)
39.95"
(1015 mm)
1
7.56"
(446 mm)
8.2"
(208 mm)
8
.35"
(212 mm)
24.29" (617 mm)
SIDE VIEW
8.17"
(
207 mm)
.89" or 3.89"
(23 or 99 mm)
3
0" to 41"
(762 to 1041 mm)
FRONT VIEW
2
9.54"
(750 mm)
12"
(305 mm)
1
0.39"
(264 mm)
24"
(610 mm)
SIDE VIEW
3.89"
(99 mm)
®
GLO-RAY
Models GRSDH-24, -30, -36, -41, -52, -60 GRSDH-24D, -30D, -36D, -41D, -52D, -60D GRSDS-24, -30, -36, -41, -52, -60
GRSDS-24D, -30D, -36D, -41D, -52D, -60D, -24T, -36T GRSDS/H -30D, -36D, -41D, -30DHW, -36DHW, -41DHW
MERCHANDISING DISPLAY WARMERS
orizontal Models
H
SPECIFICATIONS
Horizontal Models – Single Shelf
◍
Model
RSDH-24 24" ( 610 mm) 830 6.9
G
GRSDH-30 30" ( 762 mm) 970 8.1
RSDH-36 36" ( 914 mm) 1170 9.8
G
GRSDH-41s41" (1041 mm) 1340 11.2
G
GRSDH-60
RSDH-52
s
s
Horizontal Models – Dual Shelf
◍
Model
GRSDH-24Ds24" ( 610 mm) 1660 13.8
GRSDH-30Ds30" ( 762 mm) 1920 16.0
RSDH-36D
G
GRSDH-41Ds41" (1041 mm) 2680 11.2
GRSDH-52Ds52" (1321 mm) 3520 14.7
GRSDH-60D
Slant Models – Single Shelf
◍
Model
GRSDS-24 24" ( 610 mm) 695 5.8
GRSDS-30 30" ( 762 mm) 790 6.6
GRSDS-36s36" ( 914 mm) 935 7.8
GRSDS-41s41" (1041 mm) 1090 9.1
GRSDS-52s52" (1321 mm) 1400 11.7
s
GRSDS-60
Slant Models – Dual Shelf
◍
Model
GRSDS-24Ds24" ( 610 mm) 1355 11.3
GRSDS-30Ds30" ( 762 mm) 1530 12.8
GRSDS-36Ds36" ( 914 mm) 1810 15.1
GRSDS-41Ds41" (1041 mm) 2120 9.1
GRSDS-52Ds52" (1321 mm) 2725 11.7
GRSDS-60D
Slant Models – Triple Shelf
Model Width Watts Amps Shipping Weight
GRSDS-24T
GRSDS-36T
Slant / Horizontal Models – Dual Shelf
Model Width Watts Amps Shipping Weight
GRSDS/H-30D
GRSDS/H-36D
GRSDS/H-41D
GRSDS/H-30DHW
GRSDS/H-36DHW
GRSDS/H-41DHW
Width Watts Amps Shipping Weight
2" (1321 mm) 1760 14.7
5
60" (1524 mm) 2100 15.0
Width Watts Amps Shipping Weight
s
6" ( 914 mm) 2340 9.8
3
s
60" (1524 mm) 4200 17.5
Width Watts Amps Shipping Weight
60" (1524 mm) 1715 14.3
Width Watts Amps Shipping Weight
s
60" (1524 mm) 3340 14.3
s
§
23.88" ( 606 mm) 2015 16.8
s
35.88" ( 911 mm) 2685 14.6
s
30" ( 762 mm) 1530 12.8H140 lbs. (64 kg)
s
36" ( 914 mm) 1810 15.1H158 lbs. (72 kg)
s
41" (1041 mm) 2120 9.1✛178 lbs. (81 kg)
s
ª
30" ( 762 mm) 2450 11
s
ª
36" ( 914 mm) 2910 13.3✛158 lbs. (72 kg)
s
ª
41" (1041 mm) 3360 15
H
H
H
H
H
✛
H
H
H
H
H
✛
H
H
H
H
H
H
H
H
H
H
H
✛
H
✛
198 lbs. (90 kg)
100 lbs. ( 45 kg)
✛
1
✛
126 lbs. ( 57 kg)
✛
150 lbs. ( 68 kg)
268 lbs. (122 kg)
102 lbs. (46 kg)
108 lbs. (49 kg)
128 lbs. ( 58 kg)
140 lbs. ( 64 kg)
158 lbs. ( 72 kg)
✛
178 lbs. ( 81 kg)
✛
205 lbs. ( 93 kg)
238 lbs. (108 kg)
183 lbs. ( 83 kg)
225 lbs. (102 kg)
✛
✛
90 lbs. ( 41 kg)
12 lbs. ( 51 kg)
1 lbs. (23 kg)
5
58 lbs. (26 kg)
6 lbs. (30 kg)
6
74 lbs. (34 kg)
6 lbs. (39 kg)
8
72 lbs. (33 kg)
80 lbs. (36 kg)
92 lbs. (42 kg)
96 lbs. (44 kg)
140 lbs. (64 kg)
178 lbs. (81 kg)
lant Models Slant / Horizontal Models
S
DIMENSIONS
Horizontal Models –
Single: 24"-36"W x 19.5"D x 11.92"H@(610-914 x 495 x 303 mm).
41"-60"W x 19.5"D x 14.92"H* (1041-1524 x 495 x 379 mm).
Dual: 24", 36", 41", 52"W x 19.5"D x 25.3"H* (610-1524 x 495 x 643 mm).
Dual: 30" and 60"W x 19.5"D x 28.3"H
Slant Models –
Single: 24"-30"W x 24.29"D x 18.45"H@(610-762 x 617 x 469 mm).
†
36"-60"W x 24.29"D x 21.45"H* (914-1524 x 617 x 545 mm).
Q
(610-1524 x 495 x 719 mm).
Dual: 24" -60"W x 24.29"D x 32.27"H* (610-1524 x 617 x 820 mm).
Triple: 23.88"-35.88"W x 24.29"D x 43.84"H* (606-911 x 617
1114 mm).
Slant/Horizontal Models –
Dual: 30"-41"W x 24"D x 33.43"H* (762-1041 x 610 x 849 mm).
@
Includes 1" (25 mm) legs which add .89" (23 mm) to height of unit.
* Includes 4" (102 mm) legs which add 3.89" (99 mm) to height of unit.
Q
For Canada only, includes external fuse box on top of unit and 4" (102 mm) legs
VOLTAGE
†
GRSDH-24 to -52, GRSDS-24 to -60, GRSDH-24D, GRSDS-24D, GRSDS-30D, and
GRSDS/H-30D: 120 volts, single phase (use NEMA 5-15P; GRSDH-52,
GRSDH-24D, GRSDS-60, GRSDS-30D, and GRSDS/H-30D use NEMA 5-20P
for Canada).
GRSDH-30D, GRSDS-36D, GRSDS-24T, and GRSDS/H-36D: 120 volts, single
phase (use NEMA 5-20P).
GRSDH-60, GRSDH-36D to -60D, GRSDS-41D to -60D, GRSDS-36T, and
GRSDS/H-41D, -30DHW, -36DHW, -41DHW: 120/208 or 120/240 volts, single
phase, 4-wire (use NEMA L14-20P).
CORD LOCATION
GRSDH: Left rear corner toward server side.
GRSDS: Control side at right base corner.
GRSDS/H: Control side at right base corner.
PLUG CONFIGURATIONS
NEMA 5-15P
CEE 7/ 7 Schuko
◍
Export voltages available, see regional Price List for details. HBased on 120 volts.
s
NSF requires units over 36" (914 mm) in width or weighing more than 80 lbs. (36 kg)
to be either sealed, or raised on the installation surface with the 4" (102 mm) legs
included.
†
Shipping weight includes crating. §Not available for Canada.
ª
High wattage on top shelf only.
✛
Based on 120/208 volts, 120/240 volts.
BS-1363
NEMA L14-20PNEMA 5-20P
AS3112
OPTIONS (NOT FOR RETROFIT)
q Designer Colors: Warm Red, Black, Gray Granite, White Granite, Navy Blue, Hunter
Green, Antique Copper, (Glossy Gray is standard on Slant Models), non-standard
colors ae non-returnable
q Indicating Temperature Control (ITC)
q Stainless Steel End Panels (In lieu of Glass End Panels)
q Sneeze Guard (GRSDS models, one side) (GRSDH models, two sides)
q 15" (381 mm) Clearance Top Shelf (GRSDS/H models)
q Halogen Bulbs in lieu of Standard Display Lights
PRODUCT SPECS
Merchandising Warmer
The Merchandising Warmer shall be a Glo-Ray® Model ... as manufactured by the
Hatco Corporation, Milwaukee, WI 53234 U.S.A.
The warmer shall be rated at ... watts, ... volts, and be ... inches (millimeters) in overall
width. It shall consist of a thermostatically-controlled, hardcoated heated base,
infrared heat from above, full view tempered glass sides, adjustable divider rods,
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. GRSD Spec Sheet June 2013
q Locking plates for flip-up doors
q Display Sign Holder (Signs not included) – Top or Intermediate Shelf
q Flip-up Doors on One Side (24" thru 41"W (610-1041 mm) models) (not available with
sneeze guard option or display sign holder accessory on same opening)
q
Split Flip-up Doors on One Side (52" and 60"W (1321-1524 mm) models)
ACCESSORIES
q 4" (102 mm) Adjustable Legs (Standard on units over 36" (914 mm) in length or
weighing more than 80 lbs. (36 kg))
q Additional Stainless Steel Divider Rods
and incandescent display lights.
The infrared heating element shall be tubular metal sheathed and the warmer shall
have a cord with plug attached.
Accessories shall include flip-up doors,
4" (102 mm) legs
, and additional stainless
steel dividers rods.
One year on site parts and labor warranty, plus one additional year warranty on all
metal sheathed heating elements, with 24/7 service (U.S. and Canada only).
Printed in U.S.A.
Loading...