Hatco GRSDH-24 Part Manual

ITEM#

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]

Form No. GRSD-1005(S) Printed in U.S.A.

GLO-RAY

®

MERCHANDISING DISPLAY WARMERS

Models GRSDH-24, -30, -36, -41, -52, -60 GRSDH-24D, -30D, -36D, -41D, -52D, -60D GRSDS-24, -30, -36, -41, -52, -60

GRSDS-24D, -30D, -36D, -41D, -52D, -60D GRSDS/H -30D, -36D, -41D, -30DHW, -36DHW, -41DHW

The perfect unit to merchandise hot
fast foods is the Hatco Glo-Ray
Merchandising Display Warmer.
Designed specifically to hold hot
wrapped or boxed product, this unit
holds hot food safely at proper serving
temperatures. Glo-Ray Merchandising
Warmers have prefocused infrared top
heat and a thermostatically controlled
hardcoated heated base to extend the
holding times of most food.

Hardcoated shelves, adjustable dividers,
shatter-resistant incandescent display
lights, and 6' (1829 mm) cord with plug
are standard.

FLEXIBILITY

This warmer offers the convenience
of self-serve and the efficiency of
kitchen-to-server holding.

Available with slant or horizontal shelves,
the Glo-Ray Merchandising Warmers
are offered in both single and dual
shelf models. All models are made of
extruded aluminum and sturdy stainless
steel with tempered glass end panels.
Specially coated incandescent lights
illuminate the food holding area.

Designed with a slanted and horizontal
shelf, the GRSDS/H series is ideal for
holding popcorn on the top shelf and
nachos, boxed pizza, or wrapped
sandwiches on the bottom shelf.
Alternative control locations make
placement of merchandiser on front
or back serving counters possible.
An optional high wattage top shelf is
ideal for holding fried foods and an
optional top shelf clearance of 15"
(381 mm) is also available.

Slant models 30" (762 mm) and
wider will accommodate 18" x 26"
(457 x 660 mm) sheet pans.

QUALITY

The following features assure the finest
performance for years to come:

• All models have prefocused infrared
top heat directing heat to the outer
edges of the holding surface where
heat loss is the greatest.

• These warmers feature a
thermostatically-controlled, hardcoated
heated base and a cord and plug set.

• Coated shatter-resistant incandescent
lights enhance product display while
safeguarding food products from
bulb breakage.

• An optional Indicating Temperature
Control enhances accurate control
of temperature and provides digital
readout of temperature.

METAL SHEATHED HEATING ELEMENTS GUARANTEED
AGAINST BURNOUT AND BREAKAGE FOR TWO YEARS,
BLANKET ELEMENTS FOR ONE YEAR.

Model GRSDH-36
horizontal single shelf

Model GRSDS-30D dual
slant shelf with optional
backlit merchandising
sign and accessory
display sign holder
(signs not included)

Model GRSDS/H-36D
with slant shelf and
horizontal shelf

Model GRSDS/H-36DHW
with slant shelf and
horizontal shelf

Divider Rods

Model Width No. of Divider Rods Provided Average Chute Width

24" ( 610 mm) 5 Rods per Shelf 33⁄4" ( 95 mm)
30" ( 762 mm) 6 Rods per Shelf 41⁄4" (108 mm)
36" ( 914 mm) 7 Rods per Shelf 41⁄2" (114 mm)
41" (1041 mm) 8 Rods per Shelf 41⁄2" (114 mm)
52" (1321 mm) 10 Rods per Shelf 45⁄8" (117 mm)
60" (1524 mm) 12 Rods per Shelf 4

1

⁄2" (114 mm)

45

Slant Models Slant / Horizontal Models

OPTIONS (NOT FOR RETROFIT)

❑ Designer Colors: Warm Red, Black, Gray Granite,

White Granite, Navy Blue, Hunter Green

❑ Indicating Temperature Control (LED)
❑ Stainless Steel End Panels (In lieu of Glass End Panels)
❑ Breath Protector on Customer Side
❑ 15" (381 mm) Clearance Top Shelf (GRSDS/H models)
❑ Halogen Bulbs in lieu of Standard Display Lights

ITEM#

PRODUCT SPECS

Merchandising Warmer

The Merchandising Warmer shall be a Glo-Ray®Model ....as manufactured

by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.

The warmer shall be rated at ....watts, ....volts, and be ....inches (millimeters)

in overall width. It shall consist of a thermostatically-controlled, hardcoated

heated base, infrared heat from above, full view tempered glass sides,
adjustable divider rods, and incandescent display lights.
The infrared heating element shall be tubular metal sheathed and the
warmer shall have a cord with plug attached.
Accessories shall include backlit sign holder (slant models, top shelf only),
display sign holders, and additional stainless steel dividers rods.

ACCESSORIES

❑ Flip-up Doors on Customer Side
❑ Backlit Sign Holder, 120 volts 30" - 52" (762 - 1321 mm) Only, Slant

Models, Top Shelf Only (Signs not included)

❑ Display Sign Holder (Signs not included) – Top or Intermediate Shelf
❑ 4" (102 mm) Adjustable Legs (Standard on units over 36"

(914 mm) in length or weighing more than 80 lbs. (36 kg))

❑ Additional Stainless Steel Divider Rods

DIMENSIONS

Horizontal Models –

Single: 24"-60"W x 191⁄2"D x 121⁄8"H* (610-1524 x 495 x 308 mm).
Dual: 24"-60"W x 19

1

⁄2"D x 221⁄2"H* (610-1524 x 495 x 572 mm).

Slant Models –

Single: 24"-60"W x 24"D x 175⁄8"H* (610-1524 x 610 x 448 mm).
Dual: 24"-60"W x 24"D x 29

3

⁄8"H* (610-1524 x 610 x 746 mm).

Slant/Horizontal Models –

Dual: 30"-41"W x 24"D x 321⁄2"H (762-1041 x 610 x 826 mm).

*Add 3" (76 mm) to height when using 4" (102 mm) legs.

VOLTAGE

GRSDH-24 to -52, GRSDS-24 to -60, GRSDH-24D, GRSDS-24D,

and GRSDS-30D: 120 volts, single phase (uses NEMA 5-15P;
GRSDH-52, GRSDH-24D GRSDS-60, GRSDS-30D, and
GRSDS/H-30D use NEMA 5-20P for Canada).

GRSDH-30D, GRSDS-36D, and GRSDS/H-36D: 120 volts, single

phase (uses NEMA 5-20P).

GRSDH-60, GRSDH-36D to -60D, GRSDS-41D to -60D and

GRSDS/H-41D, -30DHW, -36DHW, -41DHW: 120/208 or
120/240 volts, single phase, 4-wire (uses NEMA 14-20P).

Export voltages available.

CORD LOCATION

GRSDH: Left end at rear corner toward server side.
GRSDS: Control side at right base corner.
GRSDS/H: Control side at right base corner.

PLUG CONFIGURATIONS

SPECIFICATIONS

Horizontal Models – Single Shelf

Model Width Watts Amps

★

Shipping Weight

GRSDH-24 24" ( 610 mm) 830 6.9 51 lbs. (23 kg)
GRSDH-30 30" ( 762 mm) 970 8.1 58 lbs. (26 kg)
GRSDH-36 36" ( 914 mm) 1170 9.8 66 lbs. (30 kg)
GRSDH-41▲41" (1041 mm) 1340 11.2 74 lbs. (34 kg)
GRSDH-52▲52" (1321 mm) 1760 14.7 86 lbs. (39 kg)
GRSDH-60

▲

60" (1524 mm) 2100 15.0

†

198 lbs. (90 kg)

‡

GLO-RAY

®

MERCHANDISING DISPLAY WARMERS

Models GRSDH-24, -30, -36, -41, -52, -60 GRSDH-24D, -30D, -36D, -41D, -52D, -60D GRSDS-24, -30, -36, -41, -52, -60

GRSDS-24D, -30D, -36D, -41D, -52D, -60D GRSDS/H -30D, -36D, -41D, -30DHW, -36DHW, -41DHW

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]

Form No. GRSD-1005(S) Printed in U.S.A.

Horizontal Models

★

Based on 120 volts.

▲

NSF requires units over 36" (914 mm) in width or weighing more than
80 lbs. (36 kg) to be either sealed, or raised on the installation surface
with the 4" (102 mm) legs included.

†

Based on 120/208 volts, 120/240 volts.

‡

Includes crating.

•

Not available in Canada.

◆

High wattage on top shelf only.

Horizontal Models – Dual Shelf

Slant Models – Dual Shelf

Model Width Watts Amps

★

Shipping Weight

GRSDH-24D▲24" ( 610 mm) 1660 13.8 90 lbs. ( 41 kg)
GRSDH-30D▲30" ( 762 mm) 1920 16.0 100 lbs. ( 45 kg)
GRSDH-36D▲36" ( 914 mm) 2340 9.8

†

112 lbs. ( 51 kg)

GRSDH-41D▲41" (1041 mm) 2680 11.2

†

126 lbs. ( 57 kg)

GRSDH-52D▲52" (1321 mm) 3520 14.7

†

150 lbs. ( 68 kg)

GRSDH-60D

▲

60" (1524 mm) 4200 17.5

†

268 lbs. (122 kg)

‡

Model Width Watts Amps

★

Shipping Weight

GRSDS-24D▲24" ( 610 mm) 1355 11.3 128 lbs. ( 58 kg)
GRSDS-30D▲30" ( 762 mm) 1530 12.8 140 lbs. ( 64 kg)
GRSDS-36D▲36" ( 914 mm) 1810 15.1 158 lbs. ( 72 kg)
GRSDS-41D▲41" (1041 mm) 2120 9.1

†

178 lbs. ( 81 kg)

GRSDS-52D▲52" (1321 mm) 2725 11.7

†

205 lbs. ( 93 kg)

GRSDS-60D

▲

60" (1524 mm) 3340 14.3

†

238 lbs. (108 kg)

Slant / Horizontal Models – Dual Shelf

Model Width Watts Amps Shipping Weight

GRSDS/H-30D 30" ( 762 mm) 1530 12.8★140 lbs. (64 kg)
GRSDS/H-36D 36" ( 914 mm) 1810 15.1★158 lbs. (72 kg)
GRSDS/H-41D 41" (1041 mm) 2120 9.1†178 lbs. (81 kg)
GRSDS/H-30DHW◆30" ( 762 mm) 2450 13.8†140 lbs. (64 kg)
GRSDS/H-36DHW

•

◆

36" ( 914 mm) 2910 16.4†158 lbs. (72 kg)

GRSDS/H-41DHW

•

◆

41" (1041 mm) 3460 17.3†178 lbs. (81 kg)

Model Width Watts Amps

★

Shipping Weight

GRSDS-24 24" ( 610 mm) 695 5.8 72 lbs. (33 kg)
GRSDS-30 30" ( 762 mm) 790 6.6 80 lbs. (36 kg)
GRSDS-36▲36" ( 914 mm) 935 7.8 92 lbs. (42 kg)
GRSDS-41▲41" (1041 mm) 1090 9.1 96 lbs. (44 kg)
GRSDS-52▲52" (1321 mm) 1400 11.7 102 lbs. (46 kg)
GRSDS-60

▲

60" (1524 mm) 1715 14.3 108 lbs. (49 kg)

Slant Models – Single Shelf

46

NEMA 14-20PNEMA 5-20P

CEE 7/7 Schuko

NEMA 5-15P

BS-1363

24" to 60" (610 to 1524 mm)

71⁄8"

221⁄2"

(572 mm)

(308 mm)

121⁄8"

(181 mm)

71⁄8"
(181 mm)

FRONT VIEW

3"

(76 mm)

191⁄2" (495 mm)

SIDE VIEW

(746 mm)

293⁄8"

175⁄8"

(448 mm)

3"

(76 mm)

24" (610 mm)

SIDE VIEW

321⁄2"

(826 mm)

24" to 60" (610 to 1524 mm)

81⁄4"

(210 mm)

81⁄4"

(210 mm)

FRONT VIEW

30" to 41"

(762 to 1041 mm)

12"

(305 mm)

103⁄8"

(264 mm)

FRONT VIEW

24"

(610 mm)

SIDE VIEW