Hatco GRAHN-51 Installation Manual

Installation & Operating Manual

for McDONALD’S

PREP LINE OVERHEAD WARMER

MOUNTING TO 1½ " (3.8 cm) CONDIMENT STATION

GLO-RAY® Model GRAHN-51

(Left Hand Unit GRAN.00003)

(Right Hand Unit GRAN.00004)

CONTENTS

Introduction

Electrical Specifications

Electrical Rating Chart

Authorized Part Distributors

1

Safety Instructions
Model Descriptions
Installation Instructions

Plug Configuration

Operation
Cleaning
Replacement Parts List
Warranty

Back Cover

1
1

1

2
2
2

3
3
4
5

IMPORTANT OWNER INFORMATION

Record the model number, serial number (located on the side of
the unit), voltage and purchase date of your Flav-R-Savor Heat
& Humidity Holding Cabinet in the spaces below Please have
this information available when calling Hatco for service
assistance
Model No _________________________________________

Serial No __________________________________________
Voltage ____________________________________________

Date of Purchase ____________________________________

BUSINESS HOURS: 8:00 a m to 5:00 p m

Central Standard Time
(Summer Hours: June to September –
8:00 a m to 5:00 p m C S T
Monday through Thursday
8:00 a m to 3:30 p m C S T Friday)

TELEPHONE: [phone] [phone]
PARTS & SERVICE FAX : [phone]
INTERNATIONAL FAX : [phone]

INTRODUCTION

This manual provides the installation and operating instructions
for the Prep Line Wrap Station Warmer. We recommend all
installation, operating and safety instructions appearing in this
manual be read prior to installation or operation of your Prep
Line Wrap Station Warmer. Safety instructions that appear in
this manual after a warning symbol and the words
WARNING or CAUTION printed in bold face are important.
Warning means there is the possibility of personal injury to
yourself or others. Caution means there is the possibility of
damage to the unit.

WARNING IMPORTANT SAFETY INSTRUCTIONS

1. Plug warmer into an electrical outlet of the
correct voltage, size and plug configuration. If the plug
and receptacle do not match, contact a qualified
electrician to determine the proper voltage and size and
install the proper electrical outlet.

2. To prevent electric shock, always unplug the unit before
performing cleaning, maintenance or repair.

3. Some exterior surfaces on the foodwarmer will get hot.
Use caution when touching these areas to avoid injury.

4. For safe and proper operation, the foodwarmer must be
located a reasonable distance from combustible walls and
materials. If safe distances are not maintained,
discoloration or combustion could occur.

Dimensions: 51"L x 3"W x 2.5"H (129.5 x 7.6 x 6.4 cm).

This model includes:

(1) GRAHN-51 Prep Line Overhead Warmer with on/off
toggle switch, protective acrylic heat shield and 6' (182.9
cm) cord and plug attached.

Tools needed to complete installation (to be supplied by installer):

(1) Standard Screwdriver

MODEL DESCRIPTIONS

(2) Mounting Brackets, Part No. 04.08.405.00.

(6) Wing Head Screws, Part No. 05.04.402.00 (Includes two
extra).

INSTALLATION INSTRUCTIONS

1