Hatco GRAHL-30 Parts List
®
CAUTION
Glo-Ray
Infrared Strip Heaters
GRA, GRAH, GRAL, and GRAHL Series
IMPORTANT NOTE:
Locate the Specification Label on unit to determine
exact Model Name and electrical specifications. This
information is needed to identify the correct
replacement parts. See exploded view illustration(s)
for Specification Label location.
Use of replacement parts other than those supplied
by Hatco Corporation may result in damage to unit
or injury to personnel and will void all warranties.
Model Name Page
All Models ..................2
Heating
Elements................4–5
Model Name Page
Options and
Accessories ..............6
Replacement Parts List
© 2016 Hatco Corporation
Glo-Ray®Strip Heaters
1
5
2
3
6
Specification
label on
side of unit.
12
13
14
15
16
17
4
9
10
24
19
20
21
7
22
8
18
23
11
Specification
label on
end cover.
Week Thirty-One
1331
Year 2013
GRA, GRAH, GRAL, and GRAHL Series
NOTE: Custom units may not be included in this parts list.
NOTE: The last four digits in a ten digit numerical serial number are the manufacturing date code.
Example: Serial number 9625061331 has a date code of “1331” which indicates the following:
Form No. GRARP-0716
2
Parts for Glo-Ray Strip Heaters
Item Description Part No. Qty.
1 Wire Guard See “Wire Guards” Table below 1–20
2 Light Bulb, Coated, 60 Watt
100, 120 V 02.30.043.00 1
220, 240, 220–230, 230–240 V 02.30.058.00 1
3 Light Socket
Single, Standard Watt 02.30.044.00 1
Single, High Watt 02.30.051.00 1
Dual 02.30.045.00 1
4 End Plate, Right Side
6" 04.09.051.00 1
9" 04.09.114.00 1
15" 04.10.018.00 1
18" 04.15.299.00 1
5 Heating Elements See Pages 4 & 5
6 Hanger Tab 04.08.042.00 4
7 Chain
#12 05.03.021.00 1
#14 05.03.020.00 1
8 Adjustable Angle Bracket 04.25.374.00 2–4
9 End Plate, Left Side
6" 04.09.057.00 1
9" 04.09.115.00 1
15" 04.10.028.00 1
18" 04.15.299.00 1
10 Section Cover Plate, 3" 04.08.067.00 1
11 Toggle Switch Guard 04.01.038.00 2
12 Backup Element Support Plate
(includes insulation)
13 End Cover, Wiring Barrier 04.37.091.00 2
14 Toggle Switch
100 and 120 V, 15 A (SPST) R02.19.016.00 1–2
208, 220, 240 V, 15 A (DPST) R02.19.008A.00 1–2
208, 220, 240 V, 20 A (DPST) R02.19.006.00 1–2
R04.09.056.00 2
Item Description Part No. Qty.
15 Toggle Switch Cap/Boot
Slip On 02.20.283.00 1
Threaded 02.20.040.00 1
16 Label, Toggle Switch 07.01.035.00 1
17 Indicator Plate, Toggle Switch
100, 120, 208, 220, 240 V 07.01.058.00 1
220–230 and 230–240 V CE 07.01.214.00 1
18
Terminal Block (CE only) R02.15.030.00 1
19 Infinite Switch w/ Knob
100 V R02.19.160.00 1–2
120 V R02.19.018.00 1–2
208 V R02.19.017.00 1–2
220, 240, 220–230 V,
230–240 V
20 Knob, Infinite Switch 05.30.043.00 1–2
21 Label, Infinite Switch 07.01.034.00 1–2
22
Noise Suppression (CE only) 02.13.306.00 1
23 Indicator Light
Red, 100 and 120 V 02.19.154.00 1
Red, 208 and 240 V 02.19.151.00 1
Green (220–230 and 230–240 V) 02.19.150.00 1
24 Tandem Center Cover 04.37.080.00 1–2
Wiring Diagrams
18–96" Models
100, 120, 208, 240 V HS1-1442
220 V Export HS1-3164
240 V Export HS1-3165
220–230 V CE HS1-4234
230–240 V CE HS1-4235
108–144" Tandem Models
Standard Watt HS1-2499
High Watt HS1-3059
R02.19.019.00 1–2
† 120 V circuit for light only.
The shaded areas contain electrical information for International models only.
NOTE: Quantities shown as a range (example = “1–2”) are dependent upon the width and/or depth of unit.
Wire Guards
Item Description Part No. Qty.
1 Wire Guard
18" Models 04.37.100.00 1
24" Models 04.37.100.00 1
30" Models 04.37.100.00 2
36" Models 04.37.100.00 2
42" Models 04.37.100.00 3
48" Models 04.37.100.00 3
54" Models 04.37.100.00 4
60" Models 04.37.100.00 4
NOTE: Dual models have twice the wire guard quantities shown.
Item Description Part No. Qty.
1 Wire Guard
66" Models 04.37.100.00 5
72" Models 04.37.100.00 5
84" Models 04.37.100.00 6
96" Models 04.37.100.00 7
108" Models 04.37.100.00 8
120" Models 04.37.100.00 8
132" Models 04.37.100.00 10
144" Models 04.37.100.00 10
3
Form No. GRARP-0716
Loading...