Hatco GRAH-114T PARTS LIST

ITEM DESCRIPTION PART NUMBER QTY

1 1/2 IN CONDUIT LOCKNUT 02.20.009.00 8

2 1/2 IN CHASE NIPPLE 02.20.010A.00 8

3 SNAP BUSHING 7/8" 02.20.203.00 1

4 1/2" STRAIGHT CONN, LIQUID TIGHT 02.20.460.00 2

5 CONDUIT,LIQUID-TIGHT,1/2" X 18" LONG 02.20.479.00 1

6 END COVER, WIRE WAY, 6IN EXT. 04.08.053.00 4

7 6" ALUMINUM EXT. FOR CONFIG. GRAD 04.09.001.00 5

8 GR54 SLANT REFLECTOR 04.37.007.00 2

9 GR60 SLANT REFLECTOR 04.37.008.00 2

10 GR54 STANDARD REFLECTOR 3.0" COVER 04.37.047.00 1

11 GR60 STANDARD REFLECTOR 3.0" COVER 04.37.048.00 1

12 END COVER 3.000" SUPPORT 04.37.071.00 1

13 END COVER,6.250" TANDEM,.260 ELEMENT 04.37.080.00 3

14 END COVER 2.813", MOUNTING 04.37.084.00 1

15 WIRE GUARD,.260 DIA. ELEMENT,PLATED 04.37.100.00 21

16 END COVER,.260 ELEMENT SUPPORT, 3" 04.37.193.00 2

17 END COVER,.260 ELEMENT MOUNTING, 2.813" 04.37.194.00 2

ELEMENT TABLE

VOLTAGE FRONT/REAR ELEMENTS CENTER ELEMENTS

208 02.08.143E.00 02.08.144E.00 02.08.046E.00 02.08.047E.00

2X EXTRUSION B

REAR ELEMENTS SEE ELEMENT TABLE

EXTRUSION A

18 END PLT,30",WIDE LEGS 04.37.195.00 2

19 SC PLT 8-32 X 5/16 PH PN 05.04.005.00 96

20 SC PLT 8-32X5/8 PH TR TCS TP T 05.04.011.00 9

21 NUT,PLT,8-32 KEPS NUT 05.04.023.00 10

22 SC PLT 10-32X5/16 NI PH PN 05.04.074.00 12

23 PIN-DIVIDER LOCATING,1/4-20,PLT 05.04.150.00 8

24 NUT,ALUM,1/4-20 TRIC-NUT 05.04.597.00 8

25 INSULATION,TRS 10,1-1/2" X 6" WIDE ROLL 05.05.059.00 6

26 WASHER,HELICAL SPRING LOCK NO.10 05.11.017.00 12

27 LABEL,CAUTION HOT,BLACK/SILVER 07.03.018.00 4

28 LABEL,REQUIRED SPACING 07.03.842.00 1

CENTER ELEMENTS

SEE ELEMENT TABLE

EXTRUSION B

1X EXTRUSION C

NOTES:

1) SEE SHEET 3 FOR EXTRUSION DETAILS

2) CUT INSULATION TO FIT.

3) DRILL & SECURE EXTRUSIONS TOGETHER WITH

05.04.011.00 SCREW AND 05.04.023.00, 2 SPOTS EACH, SCREWS TO THE EXPOSED SIDE.

4) NOTE THE ELEMENTS ARE STAGGERED.

18" LIQUID TIGHT CONDUIT WITH (2) 1/2" STRAIGHT FITTINGS

FRONT ELEMENTS SEE ELEMENT TABLE

2X EXTRUSION A FRONT AND BACK HOLES ADDED TO "A" EXTRUSIONS

42" LIQUID TIGHT CONDUIT (02.20.478.00)

WITH (2) 1/2" 90 DEGREE FITTINGS

SEE 10-01-1134 FOR WIRING DIAGRAM SEE 10-02-1370 FOR CONSTRUCTION DRAWING SEE 10-03-1249 FOR CONTROL ASSEMBLY DRAWING SEE SHEET 3 FOR EXTRUSION DETAILS

SLANT REFLECTORS

SLANTED OUT

CHEFS SIDE

STANDARD

REFLECTORS

SCALE 0.125

SLANT REFLECTORS SLANTED IN SERVER/CONTROL SIDE

RELEASE AND REVISION HISTORY CK:

RV DESCRIPTION DATE ENG RB

RELEASED ECO.#24779

MOD CONTROL BOX, CONDUIT PARTS

& LABELS,ADD LEVER NUT,ECO.#24841

ALL LEGS 10.817, ADD FLANGE,

SCREWS & BUSHING,ECO.#24917

50K WAS 10K,ECO.#28078

7-16-14 MEG WEM

- - -

8-6-14 MEG WEM

- - -

9-9-14 MEG WEM

4-11-17 BEW WEM

- - -

SCALE 0.040

UNLESS OTHERWISE SPECIFIED

DIMS ARE IN INCHES

TOL ON ANGLE #2.0

2 PL #0.02 3 PL #0.016

HOLE SIZES: +.005/-.002

THIS PRINT IS NOT TO

BE REPRODUCED WITHOUT

PERMISSION OF HATCO CORP.

Released

HATCO CORP., MILWAUKEE, WI

DESCRIPTION

GRAH-114T,CRACKER BARREL , ASSEMBLY

PART NUMBER

N/A

SCALE:0.075 PROJ: 715301 SHEET 1 OF 3

18" LIQUID TIGHT CONDUIT WITH (2) 1/2" STRAIGHT FITTINGS

DRAWING NUMBER

10-03-1183

REV

ITEM DESCRIPTION PART NUMBER QTY

LOOSE PARTS TO BE INCLUDED

1 SNAP BUSHING 7/8" 02.20.203.00 1

2 1/2" 90 DEG. CONN, LIQUID TIGHT 02.20.461.00 2

3 CONDUIT,LIQUID-TIGHT,1/2" X 42" LONG 02.20.478.00 1

4 FLANGE,NON-ADJUSTABLE LEG,ANODIZED 04.08.453.01 6

5 TRAY SHELF,GRAH-114T-CB 04.09.895.00 2

6 FLANGE, NON-ADJUSTABLE LEG,CRK BRL 04.37.191.00 2

7 SC PLT 8-32X5/8 PH FL TCS 05.04.093.00 16

8 NUT,ALUM,1/4-20 TRIC-NUT 05.04.597.00 8

9 LABEL,SPEC. PLATE SS.07.012.00 2

NOTE:

1) SEE LOOSE PARTS TABLE FOR ADDED PARTS TO BE SHIPPED LOOSE.

2) CLIP 02.20.410.00 (WIRE NUT,LEVER) TO 02.16.184.00 (TEMP PROBE) WIRE ENDS

ASSEMBLE THESE FLANGES TO LEGS TOPS AND BOTTOM AND SHIP WITH WARMER

ITEM DESCRIPTION PART NUMBER QTY.

A TEMPERATURE PROBE,50K,NTC 02.16.184.00 1

B 3/8TH SHORT SNAP BUSHING 02.20.261.00 2

C WIRE NUT,LEVER,2,12-28Ga,105C$ 02.20.410.00 2

D WIRE WAY GUARD,UNDER COUNTER 04.37.201.00 1

E SC PLT 8-32X5/8 PH TR TCS TP T 05.04.011.00 8

F NUT PLT 1/4-20 KEPS 05.04.205.00 9

G SS 1/4-20X1-1/2 HEX 05.04.208.00 8

H SC SS 8X3/8 HX WSHR SMS,410 05.04.549.00 4

I WASH NYL WHITE 1/2"X.317X.062 05.11.007.00 1

42" LIQUID TIGHT CONDUIT

WITH 2X 1/2" 90 DEGREE

CONTROL BOX

SEE DRAWING 10-03-1249

FOR PARTS & ASSEMBLY DETAILS

SPEC PLATE WITHOUT

AGENCY MARKINGS

FITTINGS

SCREWS, SEE ITEM E LOOSE PARTS TABLE SHIP LOOSE WITH LEGS

4X LEG ALUMINUM EXTRUSION SEE SHEET 3 FOR DETAILS

SPEC PLATE WITH AGENCY MARKINGS

18" LIQUID TIGHT CONDUIT WITH (2) 1/2" STRAIGHT FITTINGS

DETAIL A

SCALE 0.250

SCREWS, SEE ITEM E

LOOSE PARTS TABLE

SHIP LOOSE WITH LEGS

THESE PARTS ARE TO BE SHIPPED LOOSE WITH UNIT

SEE DETAIL A

SPEC PLATE LOCATION INSIDE AND OUTSIDE BOTTOM VIEW

2.761

RELEASE AND REVISION HISTORY CK:

RV DESCRIPTION DATE ENG RB

RELEASED ECO.#24779

MOD CONTROL BOX, CONDUIT PARTS

& LABELS,ADD LEVER NUT,ECO.#24841

ALL LEGS 10.817, ADD FLANGE,

SCREWS & BUSHING,ECO.#24917

50K WAS 10K,ECO.#28078

7-16-14 MEG WEM

- - -

8-6-14 MEG WEM

- - -

9-9-14 MEG WEM

4-11-17 BEW WEM

- - -

5.052

UNLESS OTHERWISE SPECIFIED

DIMS ARE IN INCHES

TOL ON ANGLE #2.0

2 PL #0.02 3 PL #0.016

HOLE SIZES: +.005/-.002

THIS PRINT IS NOT TO

BE REPRODUCED WITHOUT

PERMISSION OF HATCO CORP.

Released

DESCRIPTION

GRAH-114T,CRACKER BARREL , ASSEMBLY

PART NUMBER

N/A

SCALE:0.100 PROJ: 715301 SHEET 2 OF 3

SCALE 0.200

HATCO CORP., MILWAUKEE, WI

DRAWING NUMBER

10-03-1183

REV

+ 1 hidden pages

Hatco GRAH-114T PARTS LIST

Specifications and Main Features

Frequently Asked Questions

User Manual