Hatco GRAH-18, GRAH-24, GRAH-30, GRAH-36, GRAH-42 General Manual

GLO-RAY

Models GRAH-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84, -96, -108, -120, -132, -144 GRH-18, -24, -36, -48, -60, -72, -96

GRA-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84, -96, -108, -120, -132, -144 GR-18, -24, -36, -48, -60, -72, -96

Hatco Glo-Ray® Infrared Foodwarmers safely
keep all hot foods at optimum serving
temperatures longer. Foods do not dry out or
become discolored; even the most delicate
dishes hold that “just-prepared”look. The Glo­Ray pre-focused heat
a tubular element
surface.

FLEXIBILITY

The continuous housings, up to 12' (3658
mm) in width (aluminum only), are very
strong and eliminate the danger of sagging.
Sturdy stainless steel housings are available
up to 8' (2438 mm).

An on-off switch may be installed in front or
back of the unit to suit the location.

control installation is recommended on all
installations to extend the life of the controls.

Many combinations of remote control
enclosures are available in several sizes, built in
accordance with UL Standards to accommodate
power switches, infinite controls, indicator lights,
and wiring.

Optional sneeze guards, made of
shatterproof, easy-to-clean acrylic, are
available, providing a safe environment for
the food. Check NSF standards and local
codes for requirements.

The color options help blend warmers into
any décor.

All

Glo-Ray models are shipped factory-

assembled,

with mounting tabs, ready-to-

install quickly and easily.

QUALITY

The following features assure the finest
performance for years to come:

• Available in widths from 18" to 144”
(457-3658 mm).

• Sturdy continuous aluminum housings
eliminate sagging.

• Pre-focused heat maintains serving
temperatures longer without continuing to
cook the food.

• Variety of models, configurations, colors,
finishes and accessories provide unlimited
design flexibility.

pattern directs heat from

to bathe the entire holding

Remote

®

INFRARED FOODWARMERS

Remote Control Enclosures

ITEM#

Model GRAH-36 with optional Designer
color, infinite switch, cord and plug set,

nd accessory C-leg stand

a

Model GRAH-48 with optional

neeze guards and accessory t-legs

s

Model RMB-3F
with toggle
switch and
indicator light

Model RMB-7C with
two infinite switches

METAL SHEATHED ELEMENTS GUARANTEED AGAINST
BURNOUT AND BREAKAGE FOR TWO YEARS.

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]

Form No. GR Spec Sheet

Printed in U.S.A.

April 2009

ITEM#

Aluminum Models: 18" thru 144" (457-3658 mm)

S

tainless Models: 18" thru 96" (457-2438 mm)

2.5

"

(64 mm)

6"

(152 mm)

Protective Grill Heating Element Reector

TOP VIEWFRONT VIEW

P

ower Location (36" (914 mm) exible

m

etal conduit with 42" (1067 mm) leads)

Switch

E

ND VIEW

GLO-RAY

®

INFRARED FOODWARMERS

Models GRAH-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84, -96, -108, -120, -132, -144 GRH-18, -24, -36, -48, -60, -72, -96

GRA-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84, -96, -108, -120, -132, -144 GR-18, -24, -36, -48, -60, -72, -96

SPECIFICATIONS

AluminumHigh Watt AluminumStandardWatt

Model Watt Model Watt Width Shipping Weight

GRAH-18 350 GRA-18 250 18" ( 457 mm) 6 lbs. ( 3 kg)
GRAH-24 500 GRA-24 350 24" ( 610 mm) 7 lbs. ( 3 kg)
GRAH-30 660 GRA-30 450 30" ( 762 mm) 8 lbs. ( 4 kg)
GRAH-36 800 GRA-36 575 36" ( 914 mm) 9 lbs. ( 4 kg)
GRAH-42 950 GRA-42 675 42" (1067 mm) 10 lbs. ( 5 kg)
GRAH-48 1100 GRA-48 800 48" (1219 mm) 11 lbs. ( 5 kg)
GRAH-54 1250 GRA-54 925 54" (1372 mm) 13 lbs. ( 6 kg)
GRAH-60 1400 GRA-60 1050 60" (1524 mm) 14 lbs. ( 6 kg)
GRAH-66M1560 GRA-66 1160 66" (1676 mm) 16 lbs. ( 7 kg)
GRAH-72M1725 GRA-72 1275 72" (1829 mm) 17 lbs. ( 8 kg)
GRAH-84
GRAH-96

L

M

2050 GRA-84M1500 84" (2134 mm) 19 lbs. ( 9 kg)

L

M

2400 GRA-96M1725 96" (2438 mm) 21 lbs. (10 kg)
GRAH-108 2500 GRA-108 1850 108" (2743 mm) 23 lbs. (10 kg)
GRAH-120 2800 GRA-120 2100 120" (3048 mm) 26 lbs. (12 kg)
GRAH-132 3120 GRA-132 2320 132" (3353 mm) 30 lbs. (14 kg)
GRAH-144 3450 GRA-144 2550 144" (3658 mm) 33 lbs. (15 kg)

StainlessHighWatt StainlessStandardWatt

Model Watt Model Watt Width Shipping Weight

GRH-18 350 GR-18 250 18" ( 457 mm) 7 lbs. ( 3 kg)
GRH-24 500 GR-24 350 24" ( 610 mm) 7 lbs. ( 3 kg)
GRH-36 800 GR-36 575 36" ( 914 mm) 10 lbs. ( 5 kg)
GRH-48 1100 GR-48 800 48" (1219 mm) 12 lbs. ( 5 kg)
GRH-60 1400 GR-60 1050 60" (1524 mm) 15 lbs. ( 7 kg)
GRH-72 1725 GR-72 1275 72" (1829 mm) 19 lbs. ( 9 kg)
GRH-96 2400 GR-96 1725 96" (2438 mm) 24 lbs. (11 kg)

*

Does not include RMB.

M

When using an infinite control with 120 volt model, tandem elements are required,
cord not available.

L

120 volt models require additional switches and tandem (end-to-end) elements.

OPTIONS (NOT FOR RETROFIT)

K

Designer Colors, Aluminum Models 18" to 144" (457-3658 mm): Warm Red, Black,
Gray Granite, White Granite, Navy Blue, Hunter Green, Antique Copper

K Gloss Finishes, Aluminum Models 18" to 144" (457-3658 mm):

Gleaming Gold, Glossy Gray, Bold Black, Radiant Red, Brilliant Blue

K Indicator Light
K Tandem Charge (Max. two elements end-to-end)
K Extended Electrical Leads
K Sneeze Guard (Aluminum models only)
K Incandescent Lights available, see GR-L Spec Sheet
K Infinite Control†(Remote Recommended)
K Remote Control Enclosure

†

Maximum of 12.2 amps. Consult factory if rating of single element at 120 volts exceeds
1400 watts.

Smooth White,

DIMENSIONS

18" to 144"W x 6"D x 2.5"H (457-3658 x 152 x 64 mm).
For special lengths, consult factory.

*

Aluminum models from 18" through 12' (457-3658 mm). Available in 6"
(152 mm) increments up to 144" (3658 mm) maximum width.

VOLTAGE

120, 208 and 240 volts, single phase. Consult factory for Models GRAH-84,
GRH-96 and GRAH-96 in 120 volt, and models with tandem elements
(208 or 240V).
Export voltages available.

PLUG CONFIGURATION

120 volts only – Models 6' (1829 mm) or
less with C-Leg or T-Leg stand or Chain kit

EMA 5-15P

N

only.

MOUNTING REQUIREMENTS

Recommended Mounting Height – Standard Watt: 8"-11" (203-279 mm)

MINIMUM SPACING –

Combustibles: 13.5" (343 mm) (high watt) or 10" (254 mm) (standard watt) below,
1" (25 mm) above, and 3" (76 mm) to back wall. Non-combustibles: 1" (25 mm)
above, 10" (254 mm) (high watt with infinite or indicator lamp), and 8" (203 mm)
(high watt toggle or standard watt) below. Must be installed in a pass through
area. Units with remote switches may be installed against a non-combustible
back wall, flush to an overshelf, and 8" (203 mm) to a surface below. Maximum
10" (254 mm) setback from the front of an overshelf. Models with cords must

*

be installed 3" (76 mm) below an overshelf and 11" (279 mm) (high watt) or 10"
(254 mm) (standard watt) over a surface below.

– High Watt: 11"-14" (279-356 mm)

REMOTE CONTROL ENCLOSURES

Model Width Toggle Switches

RMB-3 5.5" (140 mm) 2 Maximum
RMB-7 9" (229 mm) 4 Maximum
RMB-14 14" (356 mm) 6 Maximum
RMB-16 16" (406 mm) 3 Maximum
RMB-20 20" (508 mm) 3 Maximum

ONE CONTROL BOX PER FOODWARMER.

K 6' (1829 mm) Cord and Plug Set (120V only)

‡

Available on models 6' (1829 mm) or less with C-leg or T-leg stand or Chain kit only.

‡

ACCESSORIES

K AdjustableTubular Stands 10"-14" (254-356 mm)
K Non-Adjustable Tubular Stands 10", 12", 14", or 16" (254, 305, 356, or 406 mm) –

Available in Designer colors

K C-Leg Stands for Models up to 6' (1829 mm) (10" or 13.5"

(254 or 343 mm) clearance)

K T-Leg Stands for Models up to 6' (1829 mm) (10", 13.5", 16", or 18" (254, 343, 406,

or 457 mm) clearance)

K Adjustable Angle Brackets (Provides 1" – 2" (25-51 mm) clearance above unit)
K Chain Suspension

PRODUCT SPECS

Infrared Foodwarmer

The Infrared Foodwarmer shall be a Glo-Ray®, manufactured by the Hatco
Corporation, Milwaukee, WI 53234 U.S.A.

With 24/7 parts and service assistance (U.S. and Canada only), the Foodwarmer
shall be a Glo-Ray Model ... , rated at ... watts, ... volts, single phase and be ... inches
(millimeters) in overall width.

The Glo-Ray shall consist of either a stainless steel or aluminum housing and
include as standard equipment four stainless steel shelf mounting tabs and

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]

Form No. GR Spec Sheet April 2009

an on-off switch may be optionally installed to either the front or rear of the unit.
The infrared heating element shall be tubular metal sheathed. The foodwarmer

shall be factory assembled ready for electrical installation.
Options and accessories shall include adjustable or non-adjustable tubular stand,

C-leg stand,T-leg stand, angle brackets, suspension chain and fittings, breath
protector, cord and plug set, indicator light, and infinite control – remote or
built-in.

Printed in U.S.A.