GLO-RAY
Models GR2A-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D GR2AH-18D, -24D, -30D, -36D, -42D,
-48D, -54D, -60D, -66D, -72D, -84D
Hatco Glo-Ray® Designer Infrared
Foodwarmers safely keep all hot foods at
optimum serving temperatures longer. Foods
do not dry out or become discolored; even
delicate dishes hold that “just-prepared” look.
The Glo-Ray pre-focused heat pattern directs
heat from a tubular element to bathe the
entire holding surface.
FLEXIBILITY
The continuous aluminum housings, up to
88" (2235 mm) in width, are very strong and
eliminate the danger of sagging.
Optional sneeze guards, made of shatterproof,
easy-to-clean acrylic, are available, providing a
safe environment for the food. Check NSF
standards and local codes for requirements.
Many combinations of remote control
enclosures are available in several sizes, built in
accordance with UL Standards to accommodate
power switches, infinite controls, indicator lights,
and wiring. Remote control installation is
required on all Designer foodwarmers.
Designer color foodwarmer and inset panels
allow the unit to match the surrounding
décor. The powdercoated surfaces provide
durability and are easy to clean.
QUALITY
The following features assure the finest
performance for years to come:
• Available in widths from 22" to 88"
(559-2235 mm).
• Sturdy continuous aluminum housings
eliminate sagging.
• Pre-focused heat maintains safe serving
temperatures longer without continuing
to cook the food.
• Variety of models, configurations, colors and
accessories provide unlimited flexibility.
ITEM#
®
DESIGNER INFRARED FOODWARMERS
odel GR2AH-42D
M
odel GR2AH-24D with
M
optional sneeze guards
Model GR2AH-36D with Designer
legs for hanging installations
Remote Control Enclosures
METAL SHEATHED ELEMENTS GUARANTEED AGAINST
BURNOUT AND BREAKAGE FOR TWO YEAR.
Model RMB-14D
with infinite controls
Model RMB-7C
with infinite controls
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
(800) 558-0607 • (414) 671-6350 • Fax (800) 543-7521 • Int’l. Fax (414) 671-3976
www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. GR2A-D Spec Sheet
Printed in U.S.A.
November 2012
ITEM#
18" or 21"
(457-533 mm)
SIDE VIEW
3.5" (89 mm)
1
8" or 21"
(457-533 mm)
SIDE VIEW
22" to 88"
(559 to 2235 mm)
18" to 84"
(457 to 2134 mm)
(Width minus 4" (102 mm))
1
3.25", 15.25",
1
7.25" or 19.25"
(
337, 387,
4
38, 489 mm)
9"
(229 mm)
3.5" (89 mm)
FRONT VIEW
SIDE VIEW
3.5" (89 mm)
60" (1524 mm)
flexible metal
conduit through
post
GLO-RAY
Models GR2A-18D, -24D, -30D, -36D, -42D, -48D, -54D, -60D, -66D, -72D, -84D GR2AH-18D, -24D, -30D, -36D, -42D,
-48D, -54D, -60D, -66D, -72D, -84D
®
DESIGNER INFRARED FOODWARMERS
S
P
E
C
I
F
I
C
A
T
I
O
N
S
6
Model
GR2A-18D 4.2 2.4 2.1 500
GR2AH-18D 5.8 3.4 2.9 700
GR2A-24D 5.8 3.4 2.9 700
GR2AH-24D 8.3 4.8 4.2 1000
GR2A-30D 7.5 4.3 3.8 900
GR2AH-30D 11.0 6.4 5.5 1320
GR2A-36D 9.6 5.6 4.8 1150
GR2AH-36D 13.3 7.7 6.7 1600
GR2A-42D 11.3 6.5 5.6 1350
GR2AH-42D 15.8 9.1 7.9 1900
GR2A-48D 13.3 7.7 6.7 1600
GR2AH-48D 18.3 10.6 9.2 2200
GR2A-54D 15.4 8.9 7.7 1850
GR2AH-54D 20.1 12.0 10.4 2500
GR2A-60D 17.5 10.1 8.8 2100
GR2AH-60D 23.3 13.5 11.7 2800
GR2A-66D 19.3 11.2 9.7 2320
GR2AH-66Dn26.0 15.0 13.0 3120
GR2A-72D 21.3 12.3 10.6 2550
GR2AH-72Dn28.8 16.6 14.4 3450
GR2A-84Dn25.0 14.4 12.5 3000
GR2AH-84Ds31.7 --3800 88" (2235 mm) 138 lbs. (63 kg)
GR2AH-84D - 19.7 17.1 4100
6
When no color is specified, color inset panels and corner caps will be black.
•
Does not include RMB.
n
120 volt models with infinite controls not available.
s
120 volt models require additional switches and tandem (end-to-end) elements
individually controlled.
Volts/Amps Watts Width Shipping
120V 208V 240V Weight
22" (559 mm) 44 lbs. (20 kg)
28" (711 mm) 48 lbs. (22 kg)
34" (864 mm) 52 lbs. (24 kg)
40" (1016 mm) 57 lbs. (26 kg)
46" (1168 mm) 66 lbs. (30 kg)
52" (1321 mm) 77 lbs. (35 kg)
58" (1473 mm) 88 lbs. (40 kg)
64" (1626 mm) 97 lbs. (44 kg)
70" (1778 mm) 107 lbs. (49 kg)
76" (1930 mm) 117 lbs. (53 kg)
DIMENSIONS
GR2A-XXD & GR2AH-XXD: 22"-88"W x 18" or 21"D x 3.5"H
•
without legs (559-2235 x 457 or 533 x 89 mm).
VOLTAGE
120, 208 and 240 volts, single phase.
Export voltages available.
REMOTE CONTROL ENCLOSURES
Model Width Toggle Switches
RMB-3 5.5" (140 mm) 2 Maximum
RMB-7 9" (229 mm) 4 Maximum
RMB-14 14" (356 mm) 6 Maximum
RMB-16 16" (406 mm) 3 Maximum
RMB-20 20" (508 mm) 3 Maximum
NOTE: ONE CONTROL BOX PER FOODWARMER.
MOUNTING REQUIREMENTS
Recommended Mounting Height –
Standard Watt: 10"-14" (254-356 mm)
High Watt: 14"-16" (356-406 mm)
MINIMUM SPACING –
May not be installed in combustible surroundings.
Must be installed no closer than 3" (76 mm) from a non-combustible
back wall and above a non-combustible surface.
OPTIONS (NOT FOR RETROFIT)
q Unit and Inset Panel Designer Colors: Warm Red, Black, Gray Granite,
White Granite, Navy Blue, Hunter Green, Antique Copper, non-standard
colors are non-returnable
q Dark Gray Designer Corner Caps, (Black is standard)
q Sneeze Guards – 7.5" or 14" (191 or 356 mm)
q Designer Non-Adjustable Stands 10", 12", 16" (254, 305, 406 mm)
Height in lieu of Standard 14" (356 mm) Stands
q 4" (102 mm) Designer Overhead Mounts
PRODUCT SPECS
Designer Infrared Foodwarmer
The Designer Infrared Foodwarmer shall be a Glo-Ray
by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
The Foodwarmer shall be a Glo-Ray Model ... , rated at ... watts, ... volts,
single phase and be ... inches (millimeters) in overall width.
The Glo-Ray shall consist of an aluminum housing and include as
standard equipment 14" (356 mm) Designer legs.
The infrared heating element shall be tubular metal sheathed.
HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • (800) 558-0607 • (414) 671-6350
Fax (800) 543-7521 • Int’l. Fax (414) 671-3976 • www.hatcocorp.com • E-mail: equipsales@hatcocorp.com
Form No. GR2A-D Spec Sheet November 2012
®, manufactured
The foodwarmer shall be factory assembled ready for electrical
installation.
Options shall include Designer non-adjustable tubular legs in various
sizes, hanger legs, dark gray Designer corner caps, sneeze guards, and
remote control enclosure.
24/7 service in U.S. and Canada only.
Printed in U.S.A.