Hatco GR2A-18 User Manual

GLO-RAY

Models GR2A-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84 GR2AH-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84

Hatco Glo-Ray® Designer Infrared
Foodwarmers safely keep all hot foods at
optimum serving temperatures longer. Foods
do not dry out or become discolored; even
delicate dishes hold that “just-prepared” look.
The Glo-Ray pre-focused heat pattern directs
heat from a tubular element to bathe the
entire holding surface.

FLEXIBILITY

The continuous aluminum housings, up to
88" (2235 mm) in width, are very strong and
eliminate the danger of sagging.

Optional sneeze guards, made of shatterproof,
easy-to-clean acrylic, are available, providing a
safe environment for the food. Check NSF
standards and local codes for requirements.

Many combinations of remote control
enclosures are available in several sizes, built in
accordance with UL Standards to accommodate
power switches, infinite controls, indicator lights,
and wiring. Remote control installation is

required on all Designer foodwarmers.

Designer color foodwarmer and inset panels
allow the unit to match the surrounding
décor. The powdercoated surfaces provide
durability and are easy to clean.

QUALITY

The following features assure the finest
performance for years to come:

• Available in widths from 22" to 88"
(559-2235 mm).

• Sturdy continuous aluminum housings
eliminate sagging.

• Pre-focused heat maintains safe serving
temperatures longer without continuing
to cook the food.

• Variety of models, configurations, colors and
accessories provide unlimited flexibility.

ITEM#

®

DESIGNER INFRARED FOODWARMERS

Model GR2AH-24

Model GR2AH-36 with Designer
legs for hanging installations

Remote Control Enclosure

Model GR2AH-24 with
optional sneeze guards

METAL SHEATHED ELEMENTS GUARANTEED AGAINST
BURNOUT AND BREAKAGE FOR TWO YEAR.

Model RMB-3F with
infinite controls

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
[phone] • [phone] • Fax [phone] • Int’l. Fax [phone]
www.hatcocorp.com • E-mail: [e-mail]

Form No. GR2A Spec Sheet

Printed in U.S.A.

August 2015

ITEM#

18" or 21"

(457-533 mm)

SIDE VIEW

(559 to 2235 mm)

18" to 84"

(457 to 2134 mm)

(Width minus 4" (102 mm))

13.25", 15.25",

17.25" or 19.25"
(337, 387,

438, 489 mm)

9"

(229 mm)

3.5" (89 mm)

FRONT VIEW

SID E VIEW

3.5" (89 mm)

60" (1524 mm)
flexible metal
conduit through
post

GLO-RAY

®

DESIGNER INFRARED FOODWARMERS

Models GR2A-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84 GR2AH-18, -24, -30, -36, -42, -48, -54, -60, -66, -72, -84

21.5" to 87.5"

SPECIFICATIONS

6

Model

GR2A-18 2.1 1.2 1.0 250
GR2AH-18 2.9 1.7 1.5 350

GR2A-24 2.9 1.7 1.5 350
GR2AH-24 4.2 2.4 2.1 500

GR2A-30 3.8 2.2 1.9 450
GR2AH-30 5.5 3.2 2.8 660

GR2A-36 4.8 2.8 2.4 575
GR2AH-36 6.7 3.9 3.3 800

GR2A-42 5.6 3.3 2.8 675
GR2AH-42 7.9 4.6 4.0 950

GR2A-48 6.7 3.9 3.3 800
GR2AH-48 9.2 5.3 4.6 1100

GR2A-54 7.7 4.5 3.9 925
GR2AH-54 10.4 6.0 5.2 1250

GR2A-60 8.8 5.1 4.4 1050
GR2AH-60 11.7 6.7 5.8 1400

GR2A-66 9.7 5.6 4.8 1160
GR2AH-66t13.0 7.5 6.5 1560

GR2A-72 10.6 6.1 5.3 1275
GR2AH-72t14.4 8.3 7.2 1725

GR2A-84t12.5 7.2 6.3 1500
GR2AH-84s15.8 --1900
GR2AH-84 - 9.9 8.5 2050

6

When no color is specified, color inset panels and corner caps will be black.

•

Does not include RMB.

t

When using an infinite control with 120 volt model, tandem elements are
required,

s

120 volt models require additional switches and tandem (end-to-end) elements
individually controlled.

Volts/Amps Watts Width Shipping

120V 208V 240V Weight

21.5" (546 mm)

27.5" (699 mm)

33.5" (851 mm)

39.5" (1003 mm)

45.5" (1156 mm)

51.5" (1308 mm)

57.5" (1460 mm)

63.5" (1613 mm)

69.5" (1765 mm)

75.5" (1918 mm)

87.5" (2223 mm)

cord not available.

36 lbs. (16 kg)

38 lbs. (17 kg)

42 lbs. (19 kg)

46 lbs. (21 kg)

54 lbs. (25 kg)

64 lbs. (29 kg)

74 lbs. (34 kg)

82 lbs. (37 kg)

91 lbs. (41 kg)

100 lbs. (45 kg)

120 lbs. (54 kg)

DIMENSIONS

GR2A & GR2AH: 22"-88"W x 9"D x 3.5"H without legs

•

(559-2235 x 229 x 89 mm).

VOLTAGE

120, 208 and 240 volts, single phase.
Export voltages available.

REMOTE CONTROL ENCLOSURES

Model Width Toggle Switches

RMB-3 5.5" (140 mm) 2 Maximum
RMB-7 9" (229 mm) 4 Maximum
RMB-14 14" (356 mm) 6 Maximum

NOTE: ONE CONTROL BOX PER FOODWARMER.

MOUNTING REQUIREMENTS

Recommended Mounting Height –

MINIMUM SPACING –

May not be installed in combustible surroundings.
Must be installed no closer than 3" (76 mm) from a non-combustible
back wall and above a non-combustible surface.

Standard Watt: 10"-12" (254-305 mm)
High Watt: 12"-14" (305-356 mm)

OPTIONS (NOT FOR RETROFIT)

q Unit and Inset Panel Designer Colors: Warm Red, Black, Gray Granite,

White Granite, Navy Blue, Hunter Green, Antique Copper, non-standard
colors are non-returnable

q Dark Gray Designer Corner Caps (Black is standard)

q Sneeze Guards – 7.5" or 14" (191 or 356 mm)
q Designer Non-Adjustable Stands 10", 12", 16" (254, 305, 406 mm)

Height in lieu of Standard 14" (356 mm) Stands

q 4" (102 mm) Designer Overhead Mounts

PRODUCT SPECS

Designer Infrared Foodwarmer

The Designer Infrared Foodwarmer shall be a Glo-Ray
by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.

The Foodwarmer shall be a Glo-Ray Model ... , rated at ... watts, ... volts,
single phase and be ... inches (millimeters) in overall width.

The Glo-Ray shall consist of an aluminum housing and include as
standard equipment 14" (356 mm) Designer legs.

The infrared heating element shall be tubular metal sheathed.

HATCO CORPORATION P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A. • [phone] • [phone]
Fax [phone] • Int’l. Fax [phone] • www.hatcocorp.com • E-mail: [e-mail]

Form No. GR2A Spec Sheet August 2015

®, manufactured

The foodwarmer shall be factory assembled ready for electrical
installation.

Options shall include Designer non-adjustable tubular legs in various
sizes, hanger legs, dark gray Designer corner caps, sneeze guards, and
remote control enclosure.

24/7 service in U.S. and Canada only.

Printed in U.S.A.