Hatco FTBR-3 User Manual

Page 1
Remote Drop-In Frost Tops
Models: FTBR-1, -2, -3, -S2, -S3 FTBX-1, -2, -3, -S2, -S3
The Hatco Remote Drop-In Frost Top keeps pre-chilled beverages, snacks, hors d’oeuvres and side dishes cool and ready to serve, but in remote congurations that offer exibility for your particular kitchen design needs. Also available in a Slim Line Series, providing wider access to your customer, regardless of the sneeze guards.
Standard features
• Available in one-, two and three-pan models as well, as two­and three-pan slim congurations
• Accommodates full-size and half-size sheet pans
• NSF 7 approved cold wall construction utilizes R-404A refrigerant keeping food product cold without drying it out
• Auto-defrost is activated through an advanced electronic controller programmed at the customer location
• 1" NPT drain simplies cleaning (excluding FTBR-1 and FTBX-1)
• Matches the Hatco line of Heated Wells for an integrated look
FTBR models only:
– Include a condensing unit (shipped loose, can be eld
mounted up to 50 feet [15.24 meters] of tubing from unit) and a control panel (shipped loose - probe wires are 16 feet [4.9 meters]) for installing in more convenient or desirable locations
FTBX models only:
– Include a control panel (shipped loose - probe wires are
16 feet [4.9 meters mm]) but shipped without a condensing unit for the increased exibility of multiple Frost Top congurations
Project
Item #
Quantity
Remote models consist of these components shipped loose
Model FTBR-2S with accessory sheet pans
Control Panel
Condensing unit (FTBR only)
Options
c
Additional Four-Year Parts Only Warranty on Compressor
(available at time of purchase only)
Accessories
c
Full-Size Pan (18"W x 13"D [457 x 330 mm])
c
Half-Size Pan (18"W x 26"D [457 x 660 mm])
(FTBR only)
HATCO CORPORATION
(800) 558-0607
Form No. FTBR. FTBX Spec Sheet Page 1 of 3 August 2015
(414) 671- 6 3 50
l
l
www.hatcocorp.com
l
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Page 2
FRONT VIEW
SIDE VIEW
No drain on FTBR-1 or FTBX-1
.5"
(13 mm)
3.06"
(77 mm)
FTBR-1 FTBX-1: 21.06” (535 mm)
FTB-2,-3 FTBX-2,-3: 28.94" (735 mm)
FTBR-1, FTBX-1: 28.94" (735 mm)
FTBR-2, FTBX-2: 39" (991 mm)
FTBR-3, FTBX-3: 57" (1448 mm)
5.05"
(128 mm)
(FTBX only)
Solenoid Valve
(FTBX only)
.84"
(21 mm)
.84"
(21 mm)
4.87"
(124 mm)
Field Connection Location
9.125"
(232 mm)
6.75"
(171 mm)
13.64" (347 mm)
10.75" (273 mm)
11.36" (289 mm)
4.87"
(124 mm)
Field Connection Location
9.125"
(232 mm)
6.75"
(171 mm)
Remote Drop-In Frost Tops
Models: FTBR-1, -2, -3, -S2, -S3, FTBX-1, -2, -3, -S2, -S3
Ordering Instructions:
Please specify the following with each order:
1. Desired Voltage:
120 (220-240V FTBX only)
2. Number of Full-Size
Sheet Pans Accommodated:
1-, 2-, 3-pan as rectangular, sheet pan with Slim or Standard conguration
Model FTBR-1, -2, -3 FTBX-1, -2, -3
FTBR-1, FTBX-1: 28.94" (735 mm)
FTBR-2, FTBX-2: 39" (991 mm)
FTBR-3, FTBX-3: 57" (1448 mm)
3. Remote Refrigeration: Note: Shipped loose: Frost Top, Control
Panel (Probe wires are 16 feet [4.9 meters]) and a TXV valve A. FTBR with a condensing unit - may be eld mounted up to 50' (15.24 meters) of tubing from the unit - that is shipped loose
3.06"
(77 mm)
B. FTBX without a condensing unit (Solenoid Valve attached to Frost Top)
FTBR-1 FTBX-1: 21.06” (535 mm)
FTB-2,-3 FTBX-2,-3: 28.94" (735 mm)
.84"
(21 mm)
5.05"
(128 mm)
(FTBX only)
Model FTBR-S2, -S3 FTBX-S2, -S3
.84"
(21 mm)
5.05"
(128 mm)
(FTBX only)
Solenoid Valve
All Models Control Panel
May be field mounted up to 16' (4.9 meters) from unit
Solenoid Valve
(FTBX only)
(FTBX only)
FTBR-S2, FTBX-S2: 54.94" (1395 mm) FTBR-S3, FTBX-S3: 80.81" (2053 mm)
Model FTBR only Condensing Unit
May be field mounted up to 50' (15.24 meters) from unit
No drain on FTBR-1 or FTBX-1
FRONT VIEW
FRONT VIEW
.5"
(13 mm)
.84"
(21 mm)
3.06"
(77 mm)
(13 mm)
SIDE VIEW
.5"
.84"
(21 mm)
FTBR-S2,-S3, FTBX-S2,-S3:
21.06" (535 mm)
SIDE VIEW
Form No. FTBR, FTBX Spec Sheet Page 2 of 3 August 2015
(800) 558-0607
HATCO CORPORATION
(414) 671- 6 3 50
l
l
www.hatcocorp.com
l
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Page 3
Well Opening
(A)
(B)
Remote Drop-In Frost Tops
Models: FTBR-1, -2, -3, -S2, -S3, FTBX-1, -2, -3, -S2, -S3
Cutout Dimensions for Remote Frost Tops
Model Minimum Width (A) Maximum Width (A) Minimum Depth (B) Maximum Depth (B)
FTBR-1, FTBX-1
FTBR-2, FTBX-2
FTBR-3, FTBX-3
FTBR-S2, FTBX-S2
FTBR-S3, FTBX-S3
27.44" (697 mm)
37.375" (949 mm)
55.375" (1407 mm)
53.31" (1354 mm)
79.19" (2011 mm)
28" (711 mm)
38" (965 mm)
56" (1422 mm)
54" (1372 mm)
79.875" (2029 mm)
19.44" (494 mm)
27.31" (694 mm)
27.31" (694 mm)
19.44" (494 mm) 20.125" (511 mm)
19.44" (494 mm) 20.125" (511 mm)
20.125" (511 mm)
28" (711 mm)
28" (711 mm)
SPECIFICATIONS Remote Drop-In Frost Tops
Dimensions ∆
Model†
FTBR-1
FTBX-1
FTBX-1
FTBR-2
FTBX-2
FTBX-2
FTBR-3
FTBX-3
FTBX-3
FTBR-S2
FTBX-S2
FTBX-S2
FTBR-S3
FTBX-S3
FTBX-S3
Models shipped with electronic temperature control and TXV valve (all shipped loose). Exception: FTBR units include a condensing unit and the FTBX units include a solenoid valve attached to well. For FTBX models only, add 5.05" (128 mm) to the height for the attached solenoid valve.
(Width x Depth x Height)
28.94" x 21.06" x 3.56" (735 x 535 x 90 mm)
39" x 28.94" x 3.56" (991 x 735 x 90 mm)
57" x 28.94" x 3.56" (1448 x 735 x 90 mm)
54.94" x 21.06" x 3.56" (1395 x 535 x 90 mm)
80.81" x 21.06" x 3.56" (2053 x 535 x 90 mm)
Voltage
120
220/230/240 17 .01
120
220/230/240 17 0.1
120
220/230/240 17 0.1
120
220/230/240 17 0.1
120
220/230/240 17 0.1
Load/ BTU/H HP Watts Amps Phase Ship Weight
1/4 804 6.7
330 N/A
1/4 804 6.7 171 lbs. (78 kg)
630 N/A
1/4 804 6.7 213 lbs. (97 kg)
930 N/A
1/4 804 6.7 179 lbs. (81 kg)
630 N/A
1/4 804 6.7 230 lbs. (104 kg)
930 N/A
The shaded areas contain electrical
information for International models
125 lbs. (57 kg)
12 0.1
12 0.1
12 0.1
12 0.1
12 0.1
Single
85 lbs (39 kg)
138 lbs. (63 kg)
155 lbs (70 kg)
130 lbs. (59 kg)
182 lbs. (83 kg)
PRODUCT SPECS Remote Drop-In Frost Tops
The Drop-In Frost Top shall be a Model ... as manufactured by the Hatco Corporation, Milwaukee, WI 53234 U.S.A.
The Frost Top shall be rated at ... watts, ... volts and be ... inches (millimeters) in overall width. It shall utilize R-404A refrigerant and consist of aluminized steel housing, electronic temperature control, and with or without a condensing unit (compressor, sight glass, service valves, receiver, and dryer).
HATCO CORPORATION
(800) 558-0607
Form No. FTBR, FTBX Spec Sheet Page 3 of 3 August 2015
(414) 671- 6 3 50
l
l
www.hatcocorp.com
l
Accessories may include sheet pans. Warranty consists of 24/7 parts and service assistance (U.S. and Canada only).
l
equipsales@hatcocorp.com
intlsales@hatcocorp.com
l
Loading...