Do not operate this equipment unless
you have read and understood the
contents of this manual! Failure to follow
the instructions contained in this manual
may result in serious injury or death.
This manual contains important safety
informationconcerningthe
maintenance, use, and operation of this
product. If you’re unable to understand
the contents of this manual, please bring
it to the attention of your supervisor.
Keep this manual in a safe location for
future reference.
No opere este equipo al menos que haya
leído ycomprendido el contenido de este
manual!Cualquierfallaenel
seguimientodelasinstrucciones
contenidasenestemanualpuede
resultar en un serio lesión o muerte. Este
manual contiene importante información
sobreseguridadconcernienteal
mantenimiento, uso y operación de este
producto. Si usted no puede entender el
contenido de este manual por favor
pregunte a su supervisor. Almacenar
este manual en una localización segura
para la referencia futura.
Authorized Parts Distributors...........Back Cover
IMPORTANT OWNER INFORMATION
Record the model number, serial number (located
on the top of the unit), voltage, and purchase date of
your Flav-R-Savor®Heated Air Curtain Cabinet in
the spaces below. Please have this information
available when contacting Hatco for service
assistance.
Model No. ________________________________
Serial No. ________________________________
Voltage __________________________________
Date of Purchase __________________________
Business8:00 a.m. to 5:00 p.m.
Hours:Central Standard Time
Telephone: (800) 558-0607; (414) 671-6350
Fax:(800) 690-2966 (Parts and Service)
Leg Assembly ..................................................5
(Summer Hours: June to September –
8:00 a.m. to 5:00 p.m. C.S.T.
Monday through Thursday
8:00 a.m. to 2:30 p.m. C.S.T. Friday)
(414) 671-3976 (International)
24 Hour 7 Day Parts and Service
Assistanceavailableinthe
UnitedStatesandCanada
by calling (800) 558-0607.
INTRODUCTION
The patented Hatco Flav-R-Savor Heated Air
Curtain Cabinets are designed to hold prepared
foods for prolongedperiodsof timewhile
maintaining that “just-made” quality. Warm air is
forced downward through ducts in front of the
cabinet opening, creating and maintaining ideal
holding temperatures without the use of doors. The
heated air is slowly drawn to the center and sides of
the cabinet, warming the food as it flows to the
perforations on the cabinet walls. The Heated Air
Curtain cabinet allows for immediate access to food
products and provides the best environment for
wrapped or unwrapped sheet pan foods.
Hatco Flav-R-Savor HeatedAir Curtain Cabinetsare
products of extensive research and field testing. The
materials used were selected for maximum
durability, attractive appearance, and optimum
performance. Every unit is inspected and tested
thoroughly prior to shipment.
Additional information can be found by visiting our
web site at www.hatcocorp.com.
This manual provides the installation, safety, and
operating instructions for Flav-R-Savor Heated Air
CurtainCabinets.Hatcorecommendsall
installation, operating, and safety instructions
appearing in this manual be read prior to installation
or operation of a Heated Air Curtain Cabinet
Safety information that appears in this manual is
identified by the following signal word panels:
WARNING indicates a hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION indicates a hazardous situation
which, if not avoided, could result in minor or
moderate injury.
NOTICE is used to address practices not related
to personal injury.
i
Form No. FS2HACM-0608
IMPORTANT SAFETY INFORMATION
WARNING
NOTICE
CAUTION
WARNING
Read the following important safety information before using this equipment to avoid
serious injury or death and to avoid damage to equipment or property.
ELECTRIC SHOCK HAZARD:
• Plug unit into a properly grounded electrical
outlet of the correct voltage, size, and plug
configuration. If the plug and receptacle do
not match, contact a qualified electrician to
determine and install the proper voltage and
size electrical outlet.
• Units supplied without an electrical plug
require field installation of the proper plug.
Plug must be properly grounded and of the
correct voltage, size, and configuration for
the electrical specifications of the unit.
Contact a qualified electrician to determine
and install the proper electrical plug.
• Turn the power switch OFF, unplug the power
cord, and allow the unit to cool before
performing any maintenance or cleaning.
• DO NOT submerge or saturate with water.
Unit is not waterproof. Do not operate if unit
has been submerged or saturated with water.
• Unit is not weatherproof. Locate the unit
indoors where the ambient air temperature is
a minimum of 70°F (21°C).
• This unit is not “jet-proof” construction. Do
not use jet-clean spray to clean this unit.
• Do not steam clean or use excessive water
on the unit.
• Do not pull unit by power cord.
• Discontinue use if power cord is frayed or
worn.
• Do not attempt to repair or replace a
damaged power cord. The cord must be
replaced by Hatco, an Authorized Hatco
Service Agent, or a person with similar
qualifications.
• Use only Genuine Hatco Replacement Parts
when service is required. Failure to use
Genuine Hatco Replacement Parts may
subject operators of the equipment to
hazardous electrical voltage, resulting in
electrical shock or burn. Genuine Hatco
Replacement Parts are specified to operate
safely in the environments in which they are
used.Someaftermarketorgeneric
replacementpartsdonothavethe
characteristics that will allow them to operate
safely in Hatco equipment.
FIRE HAZARD: Locate the unit a minimum of 1″
(25 mm) from combustible walls and materials.
Ifsafedistancesarenotmaintained,
discoloration or combustion could occur.
This unit has no “user-serviceable” parts. If
service is required on this unit, contact an
Authorized Hatco Service Agent or contact the
Hatco Service Department at 800-558-0607 or
414-671-6350; fax 800-690-2966; or International
fax 414-671-3976.
BURN HAZARD: Some exterior surfaces on the
unit will get hot. Use caution when touching
these areas.
Locate the unit at the proper counter height in
an area that is convenient for use. The location
should be level to prevent the unit or its
contents from falling accidentally and strong
enough to support the weight of the unit and its
contents.
The National Sanitation Foundation (NSF)
requires that units over 36″ (914 mm) in length
or weighing more than 80 lbs. (36 kg) either be
sealed to or raised above the installation
surface. If this unit cannot be sealed at the point
of use, 4″ (102 mm) legs are included to allow
for proper cleaning access below the unit.
Use non-abrasive cleaners only. Abrasive
cleaners could scratch the finish of your unit,
marringitsappearanceandmakingit
susceptible to soil accumulation.
Do not lay unit on the side with the control panel
or damage to the unit could occur.
Form No. FS2HACM-0608
1
MODEL DESIGNATION
F S 2 H A C - X P T
Flav-R-Savor
Style
Heated
Air
Curtain
Full-Size Pan Capacity
Pass-Through
MODEL DESCRIPTION
Figure 1. Model Designation
All Models
Flav-R-Savor HeatedAir Curtain Cabinets consist of
an easy to clean stainless steel front panel and
black powdercoat painted body. Features include
easy-to-use digital controls, a lighted ON/OFF
switch, a metal sheathed heating element, and a 6'
(1829 mm) power cord with plug (FS2HAC-4PT CE
export models come equipped with a 6' [1829 m]
power cord, but may not have a plug, depending on
the configuration). The temperature range of the
Flav-R-Savor Heated Air Curtain Cabinets is
80°-200°F (27°-93°C).
FS2HAC-2PT Model
The FS2HAC-2PT is a two-pan, pass-through style
unit that allows for food product access from either
side. The unit is capable of holding two full-size
sheet pans.
FS2HAC-4PT Model
The FS2HAC-4PT is a four-pan, pass-through style
unit that allows for food product access from either
side. The unit is capable of holding four full-size
sheet pans.
Figure 3. FS2HAC-4PT Model
Figure 2. FS2HAC-2PT Model
2
Form No. FS2HACM-0608
Plug Configurations
WARNING
NEMA L14-20P
CEE 7/7 SchukoBS-1363
NEMA 6-15P
NEMA 6-20P
Units are supplied from the factory with an electrical
cord and plug installed (plugs are supplied
according to the applications). Some export units
may require field installation of the proper plug.
ELECTRIC SHOCK HAZARD:
• Plug unit into a properly grounded electrical
outlet of the correct voltage, size, and plug
configuration. If the plug and receptacle do
not match, contact a qualified electrician to
determine and install the proper voltage and
size electrical outlet.
• Units supplied without an electrical plug
require field installation of the proper plug.
Plug must be properly grounded and of the
correct voltage, size, and configuration for
the electrical specifications of the unit.
Contact a qualified electrician to determine
and install the proper electrical plug.