Flav-R-Fresh®
Impulse Display Cabinets
Models: FDWD-1, -1X, -2, -2X
®
The Hatco Flav-R-Fresh
and heat to showcase your product longer, not just
for minutes but for hours. It holds everything from hot
pretzels to 15" (381 mm) pizzas, croissants to bagels, and
even hot dogs and meat pies.
Electrical components, controls and water reservoir are
located at the top for easy access. Electronic controls
monitor cabinet temperature. Models with two doors are
available for pass-through convenience and a variety of
merchandising racks help enhance food appeal.
The Hatco Flav-R-Fresh is ideal for restaurants, pizzerias,
convenience stores, concession stands, snack bars and
kiosks.
uses controlled moisture
Project
Item #
Quantity
FDWD-1
accessory 4-tier circle
rack and rack coupling
Standard features
• Energy efcient LED lighting showcases your food appeal while
safe-guarding food products from bulb breakage
• Separate heat and humidity controls keep crisp foods crisp and
moist foods moist
• The rounded designed cabinet features tempered glass sides
and door for full-view display
• Single- or double-side opening models
• Specify left- or right-hinged door at time of order, and doors are
eld reversable (excludes self-closing door)
WATER QUALITY REQUIREMENTS
Water supply in excess of 3.0 grains of hardness per gallon (GPG) (.75 grains of
hardness per liter) must be treated and softened before being used. Water containing
over 3.0 GPG (.75 GPL) will decrease the efciency and reduce the operating life of
the unit.
Note: Product failure caused by liming or sediment buildup is not covered
under warranty.
IFS anti-microbial coatings use naturally-occurring, environmentally sustainable,
silver ions to help inhibit the growth of microbes on the powder coated surface.
See www.hatcocorp.com/antimicrobial-paint for more information.
For operation, location and safety information, please refer to the Installation
and Operating Manual.
Options (available at time of purchase only)
Designer Colors
Non-standard colors are non-returnable –
Clear Anodized Aluminum standard –
c
Warm Red
cNavy Blue
c
Neutral White (cool) LED lighting (Warm White is standard)
c
Self-Closing Door in lieu of standard door. Left hinge only, not field
reversible
c
6" Merchandising Display Sign Holder (control side only)
(sign not included)
c
3" One Sided Merchandising Display Sign Holder (one per side, three max)
(sign not included)
c
6 3/8" One Sided Merchandising Display Sign Holder (one per side,
three max) (sign not included)
c
Black
c
Hunter Green
c
Gray Granite cWhite Granite
c
Antique Copper
Accessories
c
4" (102 mm) Adjustable Legs
c
Motorless Rack Coupling (FDWD-1X -2X only)
c
4-tier Circle Rack (Requires coupling for -1X and -2X models)
c
4-shelf Multi-Purpose Rack
c
3-tier Pretzel Tree (Requires coupling for -1X and -2X models)
c
3-shelf Angle Rack
Decorative Kit:
Two Inset Side Panels
(Non-standard colors are non-returnable – Designer Black standard)
cCrescent cWave
Curved Header
(Non-standard colors are non-returnable – Designer Black standard)
cHinged for control side cNon-hinged for non-control side
Base Skirts (requires 4" [102 mm] adjustable legs, not included)
(Non-standard colors are non-returnable – Designer Black standard)
cFlat front, back and sides cCurved front, flat back and sides
cCurved front and back, flat sides
HATCO CORPORATION
www.hatcocorp.com
Form No. FDWD Spec Sheet Page 1 of 2 Decimber 2020
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
support@hatcocorp.com
l
Find a Hatco Rep
l
Image Library
l
(800) 558-0607
l
Document Library
(414) 671- 635 0
l
l
Chat
Flav-R-Fresh® Impulse Display Cabinets
Models: FDWD-1, -1X, -2, -2X
19.39" (492 mm)
28.82"
(732 mm)
SPECIFICATIONS
Impulse Display Cabinets
ModelөType
1 Door
FDWD-1
FDWD-1X
FDWD-2
FDWD-2X
ө
Non-humidied cabinets available, unit will only operate in dry mode.
•
Height includes standard 1" (25 mm) legs.
* Shipping weight includes packaging.
with 4-tier Circle Rack
with motor
1 Door
with 4-shelf Multi-Purpose Rack
without motor
(not available for retrot)
2 Doors
with 4-tier Circle Rack
with motor
2 Doors
with 4-shelf Multi-Purpose Rack
without motor
(not available for retrot)
CABINET OPENING
15.75"W x 19.75" H (400 x 502 mm). Will fit half size sheet pans.
Dimensions
19.39" x 20.86" x 28.82"
(492 x 530 x 732 mm)
19.39" x 20.86" x 28.82"
(492 x 530 x 732 mm)
19.39" x 22" x 28.32"
(492 x 559 x 727 mm)
19.39" x 22" x 28.32"
(492 x 559 x 727 mm)
(W x D x H•)
CORD LOCATION
Facing controls, left-hand side panel, lower right corner.
Volts Watts Amps Plug Ship Weight*
100 1410
120 1360 11.3 NEMA 5-15P
220 1410 6.4 CEE 7/7 Schuko or BS-1363
240 1410 5.9 CEE 7/7 Schuko or AS 3112
220 (CE) 1410 6.4 CEE 7/7 Schuko
240 (CE) 1410 5.9 BS-1363
100 1440
120 1360 11.3 NEMA 5-15P
220 1440 6.5 CEE 7/7 Schuko or BS-1363
240 1440 6.0 CEE 7/7 Schuko or AS 3112
220 (CE) 1410 6.4 CEE 7/7 Schuko
240 (CE) 1410 5.9 BS-1363
100 1410
120 1360 11.3 NEMA 5-15P
220 1410 6.4 CEE 7/7 Schuko or BS-1363
240 1440 5.9 CEE 7/7 Schuko or AS 3112
220 (CE) 1410 6.4 CEE 7/7 Schuko
240 (CE) 1410 5.9 BS-1363
100 1410
120 1360 11.3 NEMA 5-15P
220 1410 6.4 CEE 7/7 Schuko or BS-1363
240 1440 5.9 CEE 7/7 Schuko or AS 3112
220 (CE) 1410 6.4 CEE 7/7 Schuko
240 (CE) 1410 5.9 BS-1363
22" (559 mm)
FDWD-1 & -1X only
20.86" (530 mm)
SIDE VIEWFRONT VIEW
14.1
14.4
14.1
14.1
NEMA 5-15P
NEMA 5-15P
NEMA 5-15P
NEMA 5-15P
PLUG CONFIGURATIONS
CEE 7/7 SchukoNE M A 5 -15P BS -136 3
The shaded areas contain electrical
information for International models
90 lbs. (41 kg)
90 lbs. (41 kg)
90 lbs. (41 kg)
90 lbs. (41 kg)
AS 3112
PRODUCT SPECS
Impulse Display Cabinets
The humidity controlled Impulse Display Cabinet shall be a Flav-R-Fresh® Model ...
rated at ... volts and ... watts, as manufactured by the Hatco Corporation, Milwaukee,
WI 53234 U.S.A.
The cabinet shall have ... door(s), tempered glass sides, stationary rack (or revolving
display), and LED display light. It shall include a water reservoir, electronic controls,
HATCO CORPORATION
www.hatcocorp.com
Form No. FDWD Spec Sheet Page 2 of 2 Decimber 2020
l
P.O. Box 340500 Milwaukee, WI 53234-0500 U.S.A.
l
support@hatcocorp.com
l
On/Off switch, and indicating lights. A 6' (1829 mm) cord with plug shall
be attached.
Accessories shall include merchandising racks, display sign holders (signs not
included) and side, top and base skirt.
Warranty consists of 24/7 parts and service assistance (US and Canada only).
l
Find a Hatco Rep
l
Image Library
(800) 558-0607
l
Document Library
(414) 671- 635 0
l
l
Chat