What’s in your box?
Installation
Smart Changing Pad
Safety strap
Pad cover
Before you start,
you’ll need:
Setting up your
Smart Changing Pad
A smartphone
An iPhone (running iOS8 or
higher) or Android (running
Ice Cream Sandwich version
4.0 or higher) smartphone.
Home WiFi
The Smart Changing Pad will
connect to an 802.11 b/g/n
2.4GHz network. If you’re
having trouble, check your
router documentation to verify
that you’re broadcasting on
2.4GHz and that you have MAC
address filtering turned off.
The Hatch Baby app
You can download the Hatch Baby App in the
Apple App or Google Play store.
Place the pad on a hard, flat surface, free from
obstructions — it shouldn’t be touching the
wall or sides
of your
changing table.
Open up the Hatch Baby app in your
smartphone and start creating your
account by adding in your information.
Then click on the Next button.
Then add in your baby’s information and click
on the Finish button to create your account.
You will then be asked if you’d like to connect
a Smart Changing Pad to your smartphone.
Turn on your Smart
Changing Pad by
tapping the LCD,
then click on the
Got It button. Then
click on Connect in
your app.
Pull out the battery tab.
On your phone, go to your settings and
connect to the HATCHBABY-XXXX network.
Please note: It might take a few moments for
the HATCHBABY-XXXX network to appear in
your WiFi network list.
Connect the safety strap.
PLEASE NOTE: Your Smart Changing Pad is a
sensitive piece of equipment. Dropping it, sitting
or leaning on it, or putting more than 44lbs
(20kg) on it could permanently damage it.
NEED
SCREEN
NEED
SCREEN
NEED
SCREEN
Smart
Changing Pad
QUICK START
GUIDE
Need help?
Go to
www.hatchbaby.com/setup
Enter in your WiFi password.
Success!Installation (cont.)
Your Smart Changing Pad should now be
connected to your home network.
...Or not
Having trouble? Tap “Try again” on your
phone to try again, or try reconnecting your
phone to your home WiFi.
Still not working? Go to:
www.hatchbaby.com/setup
Return to your Hatch Baby app and
select your home WiFi.
Using your
Smart Changing Pad
Your Smart Changing Pad will automatically
send weights, feeding amounts, and diaper
changes to your smartphone when you select
those options on the LCD screen. Log into the
Hatch Baby app to manually track your baby’s
sleep, feedings, growth, and more!
Want to learn more about using your Smart
Changing Pad and app? Go to
www.hatchbaby.com
Caring for your
Smart Changing Pad
The removable changing pad cover can be
washed on the gentle cycle in cold water, but
should be air dried (do not put in the dryer).
The changing pad base
can be wiped clean
with a damp cloth.
FEEDING
WEIGHING
SETTINGS POWER
DIAPER CHANGES
FCC Regulatory Statement
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Loading...