Hatch UT-M-DS-2040 User Manual
MODEL
TOP SIZE
OVERALL
WIDTH
OVERALL
DEPTH
SHIPPING
WEIGHT APP
UT-M-DS-2040*
20" x 40" - 508mm x 1016mm
41.5" - 1054mm
21.5" - 546mm
85lb - 38.6kg
UT-M-DS-2226*
22" x 26" - 559mm x 660mm
27.5" - 699mm
23.5" - 597mm
65lb - 29.5kg
UT-M-DS-2432*
24" x 32" - 610mm x 813mm
33.5" - 851mm
25.5" - 648mm
75lb - 34.1kg
UT-M-DS-2630*
26" x 30" - 660mm x 762mm
31.5" - 800mm
27.5" - 699mm
75lb - 34.1kg
UT-M-DS-2636*
26" x 36" - 660mm x 914mm
37.5" - 952mm
27.5" - 699mm
85lb - 38.6kg
UT-M-DS-3040*
30" x 40" - 762mm x 1016mm
41.5" - 1054mm
31.5" - 800mm
100lb - 45.5kg
UT-M-DS-3048*
30" x 48" - 762mm x 1219mm
49.5" - 1257mm
31.5" - 800mm
115lb - 52.3kg
MOBILE GENERAL PURPOSE UTILITY TABLE
-STAINLESS STEEL -DOUBLE LOWER STORAGE
-HEAVY DUTY AREA WITH TRAY SLIDES
Model Series: UT-M-DS-*
APPLICATION:
-Utility table
-Preparation table
-Inspection table
-Quality control table
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot welded construction
-Open sides, front and back
-Heavy gauge reinforced stainless steel top
-Heavy gauge base welded to tubular frame uprights
-Sanitary no-drip edge on base
-Double lower storage area for trays
-Heavy gauge tray slides welded to frame uprights
-Tray stops at front and rear of slides
-5” (127mm) tray slide spacing
-Total capacity of 10 trays per unit
-4 > 5” swivel, non-marking casters
with 2 side brakes
OPTIONAL FEATURES[1]:
-S - Stationary mounting feet (instead of “M”)
-WAB - Wrap around bumper
-CB - Corner bumpers
-DB - Donut bumpers (add ½” [12.7mm] to height)
-ENC - Stainless steel enclosed sides and/or rear (not NSF certified)
-LAM - Coloured laminate panel enclosed sides and/or rear (not NSF certified)
-SIB - Intermediate Shelf in place of tray slides
-Remove (*) from model code for non-NSF models
Overall height of all listed units is 34” (864mm).
Not all tray sizes will fit into all listed units. Actual unit size may depend on tray size and capacity required.
Changes available to suit customer’s requirements.
Loading...