Hatch UT-M-2430 User Manual

MODEL

TOP SIZE

OVERALL

WIDTH

OVERALL

DEPTH

SHIPPING

WEIGHT APP

UT-M-2430*

24" x 30" - 610mm x 762mm

33.5" - 699mm

23.5" - 597mm

65lb - 29.5kg

© Copyright 2012 Hatch Industries Limited

MOBILE GENERAL PURPOSE UTILITY TABLE

-STAINLESS STEEL -SINGLE LOWER STORAGE

-HEAVY DUTY AREA WITH TRAY SLIDES

Model Series: UT-M-*

APPLICATION:

-Utility table

-Preparation table

-Inspection table

-Quality control table

SPECIFICATIONS:

-Stainless steel; Type 304

-“Heliarc” and spot welded construction

-Open sides, front and back

-Heavy gauge reinforced stainless steel top

-Heavy gauge base welded to tubular frame uprights

-Sanitary no-drip edge on base

-Single lower storage area for trays

-Heavy gauge tray slides welded to frame uprights

-Tray stops at front and rear of slides

-5” (127mm) tray slide spacing

-Total capacity of 10 trays per unit

-4 > 5” swivel, non-marking casters
with 2 side brakes

OPTIONAL FEATURES[1]:

-S - Stationary mounting feet (instead of “M”)

-WAB - Wrap around bumper with internal stainless steel core for
strength and durability

-CB - Corner bumpers

-DB - Donut bumpers (add ½” [12.7mm] to height)

-ENC - Stainless steel enclosed sides and/or rear (not NSF certified)

-LAM - Coloured laminate panel enclosed sides and/or rear (not NSF certified)

-SIB - Intermediate Shelf in place of tray slides

-Remove (*) from model code for non-NSF models

Overall height of all listed units is 34” (864mm).
Not all tray sizes will fit into all listed units. Actual unit size may depend on tray size and capacity required.
Changes available to suit customer’s requirements.