Hatch TRDBH-IC-1020 User Manual
© Copyright 2012 Hatch Industries Limited
RACK DISPENSER
-STAINLESS STEEL -BUILT-IN COUNTER
-DOUBLE SPRING BANK MECHANISM -HEATED
-SELF LEVELING, FIELD ADJUSTABLE -SINGLE OR DOUBLE
Model Series: TRDBH-IC-*
APPLICATION:
-Cafeterias
-Serving lines
-Serving stations
CAPACITY:
-Racks: 5 to 6 racks per stack
-Baskets: 5 to 6 baskets per stack
DISPENSES:
-Chinaware in racks
-Chinaware in baskets
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot welded construction
-Die formed uni-frame assembly with
upright support channels
-Built in; in counter
-Flush mount installation
-Double spring bank dispensing system with roller
bearings fit into guide runners for smooth operation
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Carrier is removable to allow for adjustments after
installation
-“On/Off” switch and pilot light are mounted on the top flange
-Approved power supply cord with 3 prong end cap
ELECTRICAL DATA:
-120V, 60Hz, 1 Phase, 1000 Watts
-8.3 Amps (208V & 240V units available upon request)
-NEMA 5-15 End Cap
OPTIONAL FEATURES [1]:
-NP - Stainless steel nameplate
-Remove (*) from model code for non-NSF models
Width
Length
OVERALL
OVERALL
SHIPPING
MODEL
RACK
FLANGE
FLANGE
WEIGHT SIZE
WIDTH
LENGTH
APP.
TRDBH-IC-1020*
10" x 20"
14.5"
24.5"
35lb
254mm x 508mm
368mm
622mm
15.9kg
TRDBH-IC-2020*
20" x 20"
24.5"
24.5"
40lb
508mm x 508mm
622mm
622mm
18.2kg
OVERALL
OVERALL
SHIPPING
MODEL
RACK
FLANGE
FLANGE
WEIGHT
SIZE
WIDTH
LENGTH
APP.
TRDBH-IC-1020-2*
10" x 20"
25.5"
24.5"
50lb
254mm x 508mm
648mm
622mm
22.7kg
Width
Length
Each carrier works
independently of the other
© Copyright 2012 Hatch Industries Limited
RACK DISPENSER
-STAINLESS STEEL -BUILT-IN COUNTER
-DOUBLE SPRING BANK MECHANISM -HEATED
-SELF LEVELING, FIELD ADJUSTABLE -SINGLE OR DOUBLE
Model #: TRDBH-IC-*
Model #: TRDBH-IC-2-*
Height from mounting surface to bottom of unit is 27.5” (698.5mm).
Inside rack capacity is 21” (533.4mm) to the top of the flange.
Refer to factory for counter cut-out locations and dimensions.
Shorter sizes available upon request.
Loading...