Illustrating bowls on trays
stacked in dispenser
Illustrating bowls laid
out on trays
© Copyright 2012 Hatch Industries Limited
ROUND TUBE DISPENSER WITH TRAYS
-STAINLESS STEEL -DROP-IN
-SELF LEVELING -HEATED
-FIELD ADJUSTABLE -ENCLOSED
Model Series: TDTH-DI-*
APPLICATION:
-Service Counters
-Back Bars
-Serving Stations
CAPACITY:
-Approximate based on 12.37 tube w/12” dia. trays:
Cups (3.5”dia. x 3”high):
8 cups per tray x 8 trays per tube = 64 cups per tube
Bowls (5”dia. x 2.5”high):
4 bowls per tray x 10 trays per tube = 40 bowls per tube
DISPENSES:
-Bowls & cups on trays
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot-welded construction
-Die formed uni-frame assembly with
upright support channels
-Carrier head is suspended by a series of calibrated
springs from an under carriage frame assembly
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Drop-In counter design
-Four guide posts on top flange for china stability
-“On/Off” switch and pilot light are mounted on the top flange
-Approved power supply cord with 3 prong end cap
-8 stainless steel trays supplied as standard
ELECTRICAL DATA: OPTIONAL FEATURES [1]:
-120V, 60Hz, 1 Phase, 300 Watts -Additional stainless steel trays
(208V & 240V units available upon request) -Remove (*) from model code for non-NSF models
-NEMA 5-15 End Cap
Height from mounting surface to bottom of unit is 27.5” (698.5mm).
Inside plate capacity is 21” (533.4mm) to the top of the flange.
Shorter sizes available upon request.
© Copyright 2012 Hatch Industries Limited
ROUND TUBE DISPENSER WITH TRAYS
DROP-IN
BASIC LAYOUT AND INSTALLATION
Model Series: TDTH-DI-*
Height from mounting surface to bottom of unit is 27.5” (698.5mm).
Inside plate capacity is 21” (533.4mm) to the top of the flange.
Shorter sizes available upon request.