Hatch ST-M-2630 User Manual

MODEL

OVERALL

WIDTH

OVERALL

DEPTH

SHIPPING

WEIGHT APP

ST-M-2630*

26.25” – 667mm

30.25” – 768mm

95lb – 43.2kg

© Copyright 2012 Hatch Industries Limited

MOBILE SLICER TABLE

-STAINLESS STEEL -SINGLE LOWER

-HEAVY DUTY STORAGE AREA
FOR 1826 PANS

Model Series: ST-M-2630*

APPLICATION:

-Utility table

-Preparation table

-Coffee/tea table

-Inspection table

-Quality control table

SPECIFICATIONS:

-Stainless steel; Type 304

-“Heliarc” and spot welded construction

-Open sides, front and back

-Heavy gauge reinforced stainless steel top

-Extended, overhanging top

-Heavy gauge base welded to tubular frame uprights

-Sanitary no-drip edge on base

-Single lower storage area to accept 1826 pans

-Heavy gauge pan slides welded to frame uprights

-Pan stops at front and rear of slides

-5” (127mm) pan slide spacing

-Total capacity of 5 pans per unit

-4 > 5” swivel, non-marking casters
with 2 side brakes

OPTIONAL FEATURES [1]:

-S - Stationary mounting feet (instead of “M”)

-ENC - Stainless steel enclosed sides and/or rear (not NSF certified)

-LAM - Coloured laminate panel enclosed sides and/or rear (not NSF certified)

-Tray rail or work shelf along depth of unit top (10”, 12” or 18” wide)

-Remove (*) from model code for non-NSF models

Overall height of all listed units is 34” (864mm).
Changes available to suit customer’s requirements.