Hatch STH-DI User Manual

SQUARE TUBE DISH DISPENSER

-STAINLESS STEEL -DROP-IN

-SELF LEVELING -ENCLOSED

-FIELD ADJUSTABLE -HEATED

Model Series: STH-DI-*

APPLICATION:

-Cafeterias

-Serving lines

-Modular buffet systems

CAPACITY:

-Approximately 5 to 6 doz. square dishes per tube

-Refer to factory for square bowl capacities

DISPENSES:

-Square chinaware

SPECIFICATIONS:

-Stainless steel, Type 304

-“Heliarc” and spot-welded construction

-Die formed uni-frame assembly with upright support channels

-Double spring bank dispensing system with roller bearings fit into guide runners for smooth operation

-Dispensers are equipped with non-rusting springs that are heat treated for strength & durability

-Drop-In counter design

-“On/Off” switch and pilot light are mounted on the ELECTRICAL DATA: top flange -120V, 60Hz, 1 Phase

-Approved power supply cord with 3 prong end cap -NEMA 5-15 End Cap

-Wattage varies by models (200 / 300 Watts) Note: Remove (*) from model code for non-NSF models -208V & 240V units available upon request

Contact Factory with square dish dimensions to determine model number,

cut-out and flange dimensions.

Sample of square dishware required with purchase order.

Height from mounting surface to bottom of unit is 27.5” (698.5mm). Inside plate capacity is 21” (533.4mm) to the top of the flange.

Shorter sizes available upon request.