TRAY MAKEUP TABLE
-STAINLESS STEEL -ROLLER DESIGN
-MODULAR DESIGN -MOBILE
Model Series: RCV-M-*
APPLICATION:
-Tray Makeup Preparation
-Inspection/Rejection Applications
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot welded construction
-Stainless steel tubular upright legs fastened to
heavy gauge, die formed body
-Modular design allows unit to be shipped
completely assembled or dis-assembled with
final assembly performed at job site as required
-Roller housing has drain with basket strainer for ease
of cleaning
-Roller housing base is creased from corners to drain
to direct run off to tap
-End flashings to act as tray stops are removable without
tools and allow section to be used as left or right hand
-Rollers are divided into modular sections for ease of removal
-Nylon rollers on free-wheeling bearings
-4” swivel, non-marking casters with side brakes
OPTIONAL FEATURES[1]:
-S - Stationary mounting feet (instead of “M”)
-CB - Corner bumpers
-LB - Linear bumpers running along both sides
-For non NSF model remove “*” from code
CONSULT FACTORY FOR AVAILABLE LENGTHS