REFRIGERATED MILK BASKET DISPENSER
- STAINLESS STEEL - MOBILE
- DOUBLE SPRING BANK MECHANISM
- SELF LEVELING, FIELD ADJUSTABLE
Model Series: MWC-M-
APPLICATION:
-Cafeterias
-Serving lines
-Tray make-up systems
-Back up storage
-Modular buffet systems
DISPENSES:
-Standard dairy baskets containing milk or juice cartons
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot-welded construction
-Cabinet is complete with evaporator tubing, compressor,
controls and bottom drain
-Drain is recessed under compressor end of unit
-Fan cooled hermetically sealed condensing unit
-Evaporator tubing is refrigerant grade solid wall copper and
is located all around the interior liner
-Sealed interior liner is isolated from cabinet exterior by a
plastic breaker strip for condensation control
-Interior liner is separated from cabinet exterior on all sides
by a layer of rigid non-sag insulation
-Removable spring bank dispensing mechanism with roller
bearings running on guide frame for smooth operation
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Removable door panels allow easy access to condensing unit and controls
-Removable clear lexan covers
-Provision for hanging covers on side of unit when not in use
-Adjustable temperature range from 0°F (-18°C) to +55°F (+13°C)
-Approved power supply cord with 3 prong end cap
-Wrap-around bumper
-4 > 5” swivel, non-marking casters with 2 side brakes
ELECTRICAL DATA:
-120V, 60Hz, 1 Phase, 8.3 Amps (Other voltages available.)
-NEMA 5-15 End Cap
OPTIONAL FEATURES [1]:
-NP - Stainless steel nameplate
-BL - Bar lock assembly for cover
REFRIGERATED MILK BASKET DISPENSER
- STAINLESS STEEL - MOBILE
- DOUBLE SPRING BANK MECHANISM
- SELF LEVELING, FIELD ADJUSTABLE
Model #: MWC-M-
MWC-M-3 Shown MWC-M-6 Shown
Overall height of all units is 36 ¼” (921mm).
Dimensions include wrap around bumper.
Uses standard dairy baskets. Baskets not included.