© Copyright 2012 Hatch Industries Limited
MOBILE MIXER STAND
-STAINLESS STEEL -LOW TOP HEIGHT
-MOBILE OR STATIONARY FOR MIXER
-HEAVY DUTY
Model Series: MS-M-*
APPLICATION:
-Mixer table
-Preparation table
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot welded construction
-Open sides, front and back
-Heavy gauge channel reinforced stainless steel top
-Heavy gauge base welded to tubular frame uprights
-Sanitary no-drip edge on base
-Single lower storage area
-Removable accessory post with provision to hang accessories
-4 > 5” swivel, non-marking casters with 2 side brakes
OPTIONAL FEATURES: [1]
-S - Stationary mounting feet (instead of “M”)
-WAB - Wrap around bumper with internal stainless steel core
for strength and durability
-CB - Corner bumpers
-D - Drain in centre of lower base
-ENC - Stainless steel enclosed sides and/or rear (not NSF certified)
-LAM - Coloured laminate panel enclosed sides and/or rear (not NSF certified)
-For non NSF model remove “*” from code
Height to top of all units is 26” (660mm).
Overall height of all listed units is 70.5” (1791mm).
When ordering, please advise position of accessory post.
Changes available to suit customer’s requirements.