FROZEN PRODUCT DISPENSER
-STAINLESS STEEL -IN COUNTER
-DOUBLE SPRING BANK MECHANISM -REMOTE CONNECTION
-SELF LEVELING, FIELD ADJUSTABLE -SINGLE OR DOUBLE
Model Series: FR-IC-R-
APPLICATION:
-Cafeterias
-Serving lines
-Serving stations
CAPACITY:
-Racks: up to 5 racks per stack
-Baskets: up to 5 baskets per stack
DISPENSES:
-Pre-portioned or packaged frozen product in racks
-Pre-portioned or packaged frozen product in baskets
SPECIFICATIONS:
-Stainless steel; Type 304
-“Heliarc” and spot welded construction
-Built-in chassis installation with compressor and controls
supplied by others and mounted in a separate location
-Cabinet is complete with evaporator tubing, bottom drain
and removable dispensing mechanism
-Evaporator tubing is refrigerant grade solid wall copper
and is located all around the interior liner
-Sealed interior liner is isolated from cabinet exterior by a
plastic breaker strip for condensation control
-Interior liner is separated from cabinet exterior on all sides
by a layer of rigid non-sag insulation
-Die formed uni-frame assembly with upright support channels
-Removable double spring bank dispensing mechanism with roller
bearings fit into guide runners for smooth operation
-Dispensers are equipped with non-rusting springs
that are heat treated for strength & durability
-Removable service entrance provided for ease of connecting
compressor and controls when installing unit
ELECTRICAL DATA:
-Not applicable
OPTIONAL FEATURES [1]:
-NP - Stainless steel nameplate
-CC - Clear lexan, removable, hinged cover
FROZEN PRODUCT DISPENSER
-STAINLESS STEEL -IN COUNTER
-DOUBLE SPRING BANK MECHANISM -REMOTE CONNECTION
-SELF LEVELING, FIELD ADJUSTABLE -SINGLE OR DOUBLE
Model #: FR-IC-R-
Model #: FR-IC-R-2
Overall height of all listed units is 28” (711mm).
Contact factory for counter cut-out locations and dimensions.
Double units require 2 covers – one for each rack size.
Custom sizes are available but will need to be coordinated with custom baskets.